Sliding and Rollover on Highways - Subtleties to Note

While the horizontal curves have a duty to protect all types of road vehicles against sliding as well as rollover, the fact that different vehicle types lose their stability for competing criteria makes this task difficult and vital. In relation to the sliding and rollover of a vehicle undergoing centripetal acceleration, this technical note discusses a number of unclear interpretations of some statements seen in reference books and how their better understanding should be. This note has been prepared to observe such benefits as accident investigations, determination of pavement rehabilitation frequencies, and most importantly, ensuring the correct student learning.

Anahtar Kelimeler:

Static stability factor, rollover threshold, tripped rollover

Sliding and Rollover on Highways - Subtleties to Note

Keywords:

Static stability factor, rollover threshold, tripped rollover,

PDF

___

IHT, Roads and Traffic in Urban Areas, London: HMSO, 1987.
Macpherson, G., Highway and Transportation Engineering and Planning, Harlow: Longman Scientific & Technical, 1993.
Lamm, R., Psarianos, B., Mailaender, T., Highway Design and Traffic Safety Engineering Handbook, New York: McGraw-Hill, 1999.
Rogers, M., Highway Engineering, Oxford: Blackwell, 2003.
Roess, R., Prassas, E., McShane, W., Traffic Engineering, London: Pearson Prentice Hall, 2004.
Tunç, A., Yol Güvenlik ve Mühendisliği Uygulamaları, Ankara: Asil Yayın, 2004.
Wright, P., Dixon, K., Highway Engineering, Wiley, 2004.
KGM, Karayolu Tasarımı El Kitabı, Ankara: KGM, 2005.
Fwa, T., The Handbook of Highway Engineering, Boca Raton: Taylor & Francis, 2006.
Jha, M., Schonfeld, P., Jong, J., Kim, E., Intelligent Road Design, Southampton: WIT Press, 2006.
Brockenbrough, R., Highway Engineering Handbook, New York: McGraw Hill, 2009.
Hoel, L., Garber, N, Sadek, A., Transportation Infrastructure Engineering, Stamford: Cengage Learning, 2011.
Chakroborty, P., Das, A., Principles of Transportation Engineering, New Delhi: PHI Learning, 2012.
Mannering, F., Washburn, S., Principles of Highway Engineering and Traffic Analysis, Hoboken: Wiley, 2013.
Robinson, R., Thagesen, B., Road Engineering for Development, London: Spon Press, 2004.
Kutz, M., Handbook of Transportation Engineering, New York: McGraw-Hill, 2004.
Fricker, J., Whitford, R., Fundamentals of Transportation Engineering: A Multimodal Systems Approach, New Jersey: Prentice Hall, 2004.
Findley, D., Schroeder, B., Cunningham, C., Brown, T., Highway Engineering, Amsterdam: Elsevier, 2016.
NHTSA, Rating System for Rollover Resistance-265, National Academy of Sciences, Washington, DC, 2002.
Elvik, R., Høye, A., Vaa, T., Sørensen, M., The Handbook of Road Safety Measures, Bingley: Emerald Group Publishing, 2009.
[Wolhuter, K., Geometric Design of Roads Handbook, Boca Raton: Taylor & Francis, 2015.
Lay, M., Handbook of Road Technology, New York: Spon Press, 2009.
Günay, B., Enine İvme ve Sademe Formülleri Üzerine Bir Eleştiri, SDÜ Fen Bilimleri Enstitüsü Dergisi, cilt 15, pp. 56-59, 2011..
O'Flaherty, C., Highways; Traffic Planning and Engineering, Victoria: Arnold, 1986.
Gillespie, T., Fundamentals of Vehicle Dynamics, Warrendale: Society of Automative Engineers, Inc., 1992.
Günay, B., Fişekçioğlu, Y., Yatay Kurp Tahkiklerinde Ball-bank Tekniğinin Kullanımı, Teknik Dergi, cilt 26, no. 3, pp. 7167-7182, 2015.
Jin, Z., Li, B., Li, J., Dynamic Stability and Control of Tripped and Untripped Vehicle Rollover, Morgan & Claypool, 2019.
Umar, F., Yol İnşaatı Dersleri, İstanbul: İTÜ Yayınları, 1970.
Sütaş, İ., Öztaş, G., Karayolu İnşaatında Uygulama ve Projelendirme, İstanbul: TKY, 1986.
NCHRP, Review of Truck Characteristics as Factors in Roadway Design-505, TRB, Washington DC, 2003.
Transit, State Highway Geometric Design Manual Section 4: Horizontal Alignment, New Zealand, 2005.
Yayla, N., Karayolu Mühendisliği, İstanbul: Birsen Yayınevi, 2009.
Khanna, S., Justo, C., Highway Engineering, Roorkee: Nem Chand & Bros., 2011.
Kök, B., Karayolu Mühendisliği ve Tasarımı, Ankara: Nobel, 2019.
Cebon, D., Handbook of Vehicle-Road Interaction, Lisse: Taylor & Francis, 2000.
Chowdhury et al, Are the criteria for setting advisory speeds on curves still relevant? ITE Journal Feb., 1998
AASHTO, A Policy on Geometric Design of Highways and Streets, 7th Ed. 2018.
Donnell, E., Wood, J., Himes, S., & Torbic, D. Use of Side Friction in Horizontal Curve Design: A Margin of Safety Assessment. Transp. Research Record, 2588(1), 61-70, 2016.