On the Use of Shallow Water Equations in Hydraulics

On the Use of Shallow Water Equations in Hydraulics

Shallow water equations are widely used in inundation analysis as they are known to be successful in computation of flood inundations over wide terrains. Flood propagation in between buildings in urban areas and flows around hydraulic structures such as bridges may not satisfy the assumptions of shallow flow and may display markedly more 3-Dimensional (3D) flow characteristics. However, shallow flow equations can be used for such 3D flows also to allow fast numerical solution and a useful output may be obtained In this study, shallow water equations are applied to flows with prominent 3D characteristicsand results are evaluated. Water depths and velocity field in horizontal plane were calculatedsatisfactorily, surface waves in supercritical flow involving shocks were described in detail.However, in flows passing around more than one obstruction, there is a cumulative increasein error in the computed water depths. In case of uniform flows with boundary layercharacteristics, velocity and bed shear stresses were predicted successfully using a suitableturbulence model.

___

  • [1] Toro, E.F., Shock-Capturing Methods for Free-Surface Shallow Flows, Chichester. John Wiley & Sons, 2001.
  • [2] Toro, E.F., Riemann Solvers and Numerical Methods for Fluid Dynamics. A Practical Introduction, Berlin, Heidelberg. Springer-Verlag, 2009.
  • [3] İşcen, B. N., Computer Code Development for Numerical Solution of Depth Integrated Shallow Water Equations to Study Flood Waves, Yüksek Lisans Tezi, Orta Doğu Teknik Üniversitesi, Ankara, Türkiye, 2015.
  • [4] Alcrudo, F. and Garcia-Navarro, P., A High-Resolution Godunov Type Scheme in Finite Volumes for the 2D Shallow Water Equations, International Journal for Numerical Methods in Fluids, 16, 489-505, 1993.
  • [5] Roe, P. L., Approximate Riemann Solvers, Parameter Vectors, and Difference Schemes, Journal of Computational Physics, 43, 357–372, 1981.
  • [6] Versteeg, H. K., Malalasekera, W., An Introduction to Computational Fluid Dynamics - The Finite Volume Method, Pearson. Prentice Hall, 2007.
  • [7] Stoker, J. J., Water Waves, the Mathematical Theory with Applications, London. Wiley, 1957.
  • [8] Wu, C., Huang, G., and Zheng, Y., Theoretical Solution of Dam Break Shock Wave, Journal of Hydraulic Engineering, 125(11), 1210–1215, 1999.
  • [9] Zoppou, C. and Roberts, S., Explicit Schemes for Dam-Break Simulations, Journal of Hydraulic Engineering, 129(1), 11–34, 2003.
  • [10] Brufau, P. and Garcia-Navarro, P., Two-Dimensional Dam Break Flow Simulation, International Journal for Numerical Methods in Fluids, 33, 35–57, 2000.
  • [11] Yılmaz, B., Development and Validation of Two-Dimensional Depth-Averaged Free Surface Flow Solver, Yüksek Lisans Tezi, Orta Doğu Teknik Üniversitesi, Ankara, Türkiye, 2003.
  • [12] Canelas, R., Murillo, J. and Ferreira, R., Two-Dimensional Depth-Averaged Modelling of Dam-Break Flows Over Mobile Beds, Journal of Hydraulic Research, 51(4), 392–407, 2013.
  • [13] Raisee, M., Jafari, A., Babaei, H. and Iacovides, H., Two-Dimensional Prediction of Time Dependent Turbulent Flow Around a Square Cylinder Confined in a Channel, International Journal for Numerical Methods in Fluids, 62, 1232–1263, 2010.
  • [14] Wu, W., Sanchez, A. and Zhang, M., An Implicit 2-D Shallow Water Flow Model on Unstructured Quadtree Rectangular Mesh, Journal of Coastal Research, 59, 15-26, 2011.
  • [15] Wu, W., Wang, P. and Chiba, N., Comparison of Five Depth-Averaged 2-D Turbulence Models for River Flows, Archives of Hydro-Engineering and Environmental Mechanics, 51(2), 183-200, 2004.
  • [16] Yu, C. and Duan, J., Two-Dimensional Depth-Averaged Finite Volume Model for Unsteady Turbulent Flow, Journal of Hydraulic Research, 50(6), 599–611, 2012.
  • [17] Fe, J., Navarrina, F., Puertas, J., Vellando, P. and Ruiz, D., Experimental Validation of Two Depth-Averaged Turbulence Models, International Journal for Numerical Methods in Fluids, 60, 177–202, 2009.
  • [18] Aydın, İ., Nonlinear Mixing Length Model for Prediction of Secondary Currents in Uniform Channel Flows. Journal of Hydraulic Engineering, 135(2), 146–153, 2009.