___

• [1] Gündüz, A., Mühendislikte Olasılık, İstatistik, Risk ve Güvenilirlik, Birinci Baskı, Küre Basım Yayım, İstanbul, 1996. [2] Ang, A. H-S., Tang, W. H., Probability concepts in engineering planning and design, V.II, Decision, risk, and reliability, Wiley, New York, 1984. [3] Ranganathan, R., Reliability analysis and design of structures, tata McGraw-Hill offices, New Delhi, 1990. [4] Nowak, A.S., Collins, K.R., Reliability of structures, The McGraw-Hill Companies, 2000. [5] Taylor, R., Some Shear Tests On Reinforced Concrete Beams Without Shear Reinforcement, Mag Conc Res, 12(36): 145-154, 1960. [6] Krefeld, W.J., Thurston, C. W., Studies of the shear and Diagonal Tension Strength of Simply Supported Reinforced Concrete Beams, ACI Journal, 63(4): 451-476, 1966. [7] Shah, A., Ahmad, S., An Experimental Investigation into Shear Capacity of High Strength Concrete, Asian Journal of Civil Engineering (Building and Housing), 8(15): 549-562, 2007. [8] Moody, K.G., Viest, I. M., Elstner, R. C., Hognestad, E., Shear strength of reinforced concrete beams, part I-tests of simple beams, ACI J Proceed, 51(3): 317-332, 1954. [9] Mattock, A. H., Diagonal tension cracking in concrete beams with axial forces, Proceed ASCE, 95(ST9): 1887-1900, 1969. [10] Diaz de Cossio, R., Siess, C. P., Behavior and strength in shear of beams and frames without web reinforcement, ACI J Proceed, 56(8): 695-735, 1960. [11] Van den Berg, F. J., Shear strength of reinforced concrete beams without web reinforcement. Part2-Factors affecting load at diagonal cracking, ACI J Proceed, 59(11): 1587-1600, 1962. [12] Ahmad, S. H., Khaloo, A. R., Poveda, A., Shear capacity of reinforced high-strength concrete beams, ACI J 83(2): 297-305, 1986. [13] Sneed, L. H., Ramirez, J. A., Influence of effective depth on shear strength of concrete beams-Experimental study, ACI Struct J, 107(5), 554-562, 2010. [14] ACI Committee 318, Building Code Requirements For Structural Concrete (ACI 318M-08) and Commentary, ACI, Farmington Hills, 2008. [15] TS 500, Betonarme Yapıların Hesap ve Yapım Kuralları, Türk Standartları Enstitüsü, Ankara, 2000. [16] Eurocode 2: Design of Concrete Structures, Part 1-1, General Rules and Rules For Buildings, CEN, Brussels, EN 1992-1-1:2004. [17] Comité Euro-International du Béton (CEB): CEB-FIP Model Code,; Bulletin d’Information, Thomas Telford Services, London, 213-214, 1990. [18] Zsutty, T. C., Shear Strength Prediction For Separate Categories of Simple Beam Tests, ACI J Proceed, 68(2): 138-143, 1971. [19] Okamura, H., Higai, T., Proposed Design Equation For Shear Strength of RC Beams Without Web Reinforcement, Proc Japan Soc Civil Eng, 300:131–141, 1980. [20] Bazant, Z. P., Kim, J. K., Size Effect In Shear Failure Of Longitudinally Reinforced Beams, ACI Struct J, 81(5): 456-468, 1984. [21] Kim, J. K., Park, Y. D., Prediction of shear strength of reinforced concrete beams without web reinforcement, ACI Mater J, 93(3): 213-222, 1996. [22] Collins, M.P., Kuchma, D.A., How Safe Are Our Large, Lightly Reinforced Concrete Beams, Slabs and Footings, ACI Struct J, 96(4): 482–490, 1999. [23] Rebeiz, K. S., Shear Strength Prediction For Concrete Member, J Struct Eng ASCE, 125(3): 301-308, 1999 [24] Khuntia, M., Stojadinovic, B., Shear Strength Of Reinforced Concrete Beams Without Transverse Reinforcement, ACI Struct J. ,98(5):648–656, 2001. [25] TS 500, Betonarme Yapıların Hesap ve Yapım Kuralları, 1984. [26] Ersoy, U., Özcebe, G., Betonarme, Evrim Yayınevi, İstanbul, 2001. [27] Hosseinnezhad, A., Pourzeynali, S., Razzaghi, J., Aplication of First- Order Second- Moment Level 2 Reliability Analysis of Presstressed Concrete Bridges, 7th International Congress On Civil Engineering, 2000. [28] Enright, M. P., Frangopol, D.M., Probabilistic Analysis of Resistance Degradation of Reinforced Concrete Bridge Beams Under Corrosion, Engineering Structures , 20: 960-971, 1998. [29] Neves, R. A., Chateauneuf, A.M., Venturini W.S., Component and System Reliability Analysis Of Nonlinear Reinforced Concrete Grids With Multiple Failure Modes, Structural Safety, 30: 183-189, 2008. [30] He, Z., Qiu, F., Probabilistic Assesment On Flexural Capasity of GFRP- Reinforced Concrete Beams Designed By Guideline, Construction and Building Materials, 25: 1663-1670, 2011. [31] Soares, R.C., Mohammed, A., Venturini, W.S., Lemaire, M., Reliability Analysis of Nonlinear Reinforced Concrete Frames Using The Response Surface Method, Reliability Engineering and System Safety, 75: 1-16, 2002. [32] Biandini, F., Bantempi, F., Frangopol, D.M., Malerba, P.G., Reliability of Material and Geometrically Non-linear Reinforced and Prestressed Concrete Structure, Computers and Structure, 82: 1021-1031, 2004. [33] İbiş A., Literatürde önerilen enine donatısız betonarme kiriş çatlama kesme mukavemeti bağıntılarının güvenilirliğinin olasılıksal yöntemlerle irdelenmesi, Yüksek Lisans Tezi, Yıldız Teknik Üniversitesi, 2011.