___

• 1. Köse, C. and Karaca, E., (2017). Robotic Nd:YAG Fiber Laser Welding of Ti-6Al-4V Alloy, Metals, Vol:7, pp:1-11.
• 2. Kahraman, N., (2007). The Influence of Welding Parameters on the Joint Strength of Resistance Spot-Welded Titanium Sheets, Mater.Des., Vol:28, pp:420-427.
• 3. Çalıgülü, U., (2016). Ti6Al4V Alaşımının Gümüş Aratabaka Kullanılarak Difüzyon Kaynağı ile Birleştirilebilirliği, Dicle Üniversitesi Mühendislik Dergisi, Vol:7, pp:577-586.
• 4. Yıldız, A., Kaya, Y., and Kahraman, N., (2016). Joint Properties and Microstructure of Diffusion-Bonded Grade 2 Titanium to AISI 430 Ferritic Stainless Steel Using Pure Ni Interlayer, Int J Adv Manuf Technol., Vol:86, pp:1287-1298.
• 5. Dikbaş, H. and Katı, N., (2015). Ti6Al4V Alaşımının PTA Kaynağında 1800W Kaynak Gücünde Birleştirilebilirliğin Araştırılması, Dicle Üniversitesi Mühendislik Fakültesi, Mühendislik Dergisi, Vol:6, pp:19-30.
• 6. Gao, X.L., Zhang, L.J., Jing, L., and Zhang, J.X., (2013). A Comparative Study of Pulsed Nd:YAG Laser Welding and TIG Welding of Thin Ti6Al4V Titanium Alloy Plate, Mat Sci Eng A., Vol:559, pp:14-21.
• 7. Balasubramanian, T.S., Balakrishnan, M., Balasubramanian, V., and Manickam, M.M., (2011). Influence of Welding Processes on Microstructure, Tensile and Impact Properties of Ti-6Al-4V Alloy Joints, Trans. Nonferrous Met. Soc. China., Vol:6, pp:1253-1262.
• 8. Murthy, K.K. and Sundaresan, S., (1998). Phase Transformations in a Welded Near-α Titanium Alloy as a Function of Weld Cooling Rate and Post-Weld Heat Treatment Conditions, J. Mater. Sci., Vol:33, pp:817-826.
• 9. Köse, C. and Kaçar, R., (2014). The Effect of Preheat & Post Weld Heat Treatment on the Laser Weldability of AISI 420 Martensitic Stainless Steel, Mater. Des., Vol:64, pp:221–226.
• 10. Köse, C. and Kaçar, R., (2014). Mechanical Properties of Laser Welded 2205 Duplex Stainless Steel, Mater Test., Vol:54, pp:779-785.
• 11. Köse, C. and Kaçar, R., (2015). Effect of Welding Speed on the Mechanical Properties and Microstructure of Laser Welded AISI 316L Stainless Steel, J Fac Eng Archit Gaz., Vol:3, pp:225-235.
• 12. Köse, C., Kaçar, R., Zorba, A., Bağırova, M., and Allahverdiyev, A.M., (2016). The Effect of CO2 Laser Beam Welded AISI 316L Austenitic Stainless Steel on the Viability of Fibroblast Cells, In Vitro, Mater Sci Eng C., Vol:60, pp:211-218.
• 13. Köse, C. and Kaçar, R., (2016). In Vitro Bioactivity and Corrosion Properties of Laser Beam Welded Medical Grade AISI 316L Stainless Steel in Simulated Body Fluid, Int. J. Electrochem. Sci., Vol:11, pp:2762-2777.
• 14. Köse, C., (2016). An Investigation of the Surface Characterization of Laser Surface Remelted and Laser Beam Welded AISI 316L Stainless Steel, Int. J. Electrochem. Sci., Vol:11, pp:3542-3554.
• 15. Köse, C., (2016). Weldability of 5754 Aluminum Alloy Using a Pulsed Nd:YAG Micro Scale Laser, Mater. Test., Vol:58, pp:963-969.
• 16. Taskin, M., Caligulu, U., and Turkmen, M., (2011). X-ray Tests of AISI 430 and 304 Stainless Steels and AISI 1010 Low Carbon Steel Welded by CO2 Laser Beam Welding, Mater Test., Vol:53, pp:741-747.
• 17. Quintino, L., Costa, A., Miranda, R., Yapp, D., Kumar, V., and Kong, C.J., (2007). Welding with High Power Fiber Lasers – A Preliminary Study, Mater. Des., Vol:28, pp:1231-1237.
• 18. Fu, P., Mao, Z., Zuo, C., Wang, Y., and Wang, C., (2014). Microstructures and Fatigue Properties of Electron Beam Welds with Beam Oscillation for Heavy Section TC4-DT Alloy, Chin J Aeronaut., Vol:4, pp:1015-1021.
• 19. Casalino, G., Mortello, M., and Campanelli, S.L., (2015). Ytterbium Fiber Laser Welding of Ti6Al4V Alloy, J Manuf Process., Vol:20, pp:250-256.
• 20. Wang, S.H., Wei, M.D., and Tsay, L.W., (2003). Tensile Properties of LBW Welds in Ti–6Al–4V Alloy at Evaluated Temperatures Below 450°C, Mater. Lett., Vol:57, pp:1815-1823.
• 21. Ahmed, T, and Rack, H.J., (1998). Phase Transformations During Cooling in α+β Titanium Alloys, Mat Sci Eng A., Vol:1-2, pp:206-211.
• 22. Akman, E., Demir, A., Canel, T., and Sınmazçelik, T., (2009). Laser Welding of Ti6Al4V Titanium Alloys, J. Mater. Process. Technol.,Vol:209, pp:3705-3713.
• 23. Kabir, A.S.H., Cao, X., Medraj, M., Wanjara, P., Cuddy, J., and Birur, A., (2010). Effect of welding speed and defocusing distance on the quality of laser welded Ti-6Al-4V. Proceedings of the Materials Science and Technology (MS&T), Conference. Houston, TX.
• 24. Sundaresan, S., Ram G.D.J., and Reddy, G.M., (1999). Microstructural Refinement of Weld Fusion Zones in a–b titanium Alloys Using Pulsed Current Welding, Mat Sci Eng A., Vol:262, pp:88-100.
• 25. Barreda, J.L., Santamaria, F., Azpiroz, X., Irisarri, A.M., and Varona, J.M., (2001). Electron Beam Welded High Thickness Ti6Al4V Plates Using Filler Metal of Similar and Different Composition to the Base Plate, Vacuum, Vol:62, pp:143-150.
• 26. Yunk, W.K.C., Ralph, B., Lee, W.B., and Fenn, R., (1997). An Investigation into Welding Parameters Affecting the Tensile Properties of Titanium Welds, J. Mater. Process. Technol., Vol:63, pp:759-764.
• 27. Tsay, L.W. and Tsay, C.Y., (1997). The Effect of Microstructures on the Fatigue Crack Growth in Ti-6AI-4V Laser Welds, In J Fatigue, Vol:19, pp:713-720.
• 28. Mehdi, B., Badji, R., Ji, V., Allili, B, Deschaux-Beaume, F., and Soulie, F., (2016). Microstructure and Residual Stresses in Ti-6Al-4V Alloy Pulsed and Unpulsed TIG Welds, J. Mater. Process. Technol., Vol:231, pp:441-448.
• 29. Kabir, A.S.H., Cao, X., Gholipour, J., Wanjara, P., Cuddy, J., Birur, A., and Medraj, M., (2012). Effect of Postweld Heat Treatment on Microstructure, Hardness, and Tensile Properties of Laser-Welded Ti-6Al-4V, Metall and Mat Trans A, Vol:43, pp:4171-4184.
• 30. Caiazzo, F., Curcio, F., Daurelio, G., and Minutolo, F.M.C., (2004). Ti6Al4V Sheets Lap and Butt Joints Carried Out by CO2 Laser: Mechanical and Morphological Characterization, J. Mater. Process. Technol., Vol:149, pp:546-552.