___

• Erden, M.A., (2015). Toz Metalürjisi Yöntemiyle Üretilen
• Mikroalaşım Çeliklerinin Mikroyapı Mekanik Özellik
• İlişkisinin Araştırılması, Doktora Tezi, Karabük Üniversitesi
• Fen Bilimleri Enstitüsü.
• Karabulut, H., Çıtak, R. ve Çinici, H., (2014). Al Matrisli ve
• B4C. Parçacık Takviyeli Kompozitlerin Farklı Mekanik Alaşımlama
• Sürelerinde Üretilmesi ve Karakterize Edilmesi, 7th
• International Powder Metallurgy Conference and Exhibition,
• G.Ü., 247-248, Ankara
• Taskın, M. and Calıgulu, U., (2006). Modelling of Microhardness
• Values by means of Artificial Neural Networks of Al/SiCp Metal
• Matrix Composite Material Couples Processed with Diffusion
• Method, Mathematical and Computational Applications,
• (3):163-172.
• Taskın, M., Çalıgülü, U., and Gur, A.K., (2008). Modeling
• adhesive wear resistance of Al-Si-Mg-/SiCp PM compacts
• fabricated by hot pressing process, by means of ANN, The
• International Journal of Advanced Manufacturing Technology,
• :715-721.
• Taskın, M., Dikbaş, H., Çalıgülü, U., (2008). Artificial Neural
• Network (ANN) Approach to Prediction of Diffusion Bonding
• Behavior (shear strength) of Ni-Ti Alloys Manufactured by Powder
• Metalurgy Method, Mathematical and Computational
• Applications,13(3):183-191.
• Gur, A.K., Calıgulu, U., and Taskın, M., (2011). The
• Optimisation of Adhesive Wear Behavior of Almgsi/Sic Aluminium
• Composite with Taguchi Method, Australian Journal of Basic and
• Applied Sciences, 5(9):1584-1590.
• Erden, M.A., Gündüz, S., Türkmen, M., and Karabulut, H., (2014).
• Microstructural characterization and mechanical properties of
• microalloyed powder metallurgy steels, Materials Science and
• Engineering A, 616:201-206.
• Erden, M.A., Gündüz, S., Türkmen, M., and Karabulut, H.,(2016).
• The Effect of V Addition on the Microstructure and Mechanical
• Properties of Low Carbon Microalloyed Powder Metallurgy
• Steels, Meterials Testing, 58(5):433-437.
• Mutlu, İ., (2012). Alüminyum Matrisli Metal Kompozit
• Malzemelerin Üretilmesi, Taşıt Teknolojileri Elektronik Dergisi
• (TATED), 4(1):31-36.
• Gladman, T. and Woodhead, J.H., (1960). The accuracy of point
• counting in metallographic investigations, Journal of the Iron
• Steel, 194:189-194.
• Jing, W., Yisan, W., and Yichao, D., (2007). Production of
• (Ti,V)Creinforced Fe matrix composites, Materials Science and
• Engineering A,454-455:75-79.
• Sarıtaş, S., Türker, M. ve Durlu, N., (2007). Toz Metalurjisi ve
• Parçacıklı Malzeme İşlemleri, Türk Toz Metalurjisi Yayınları,
• :2-410.
• Erden, M.A., Gündüz, S., Türkmen, M. ve Karabulut, H., (2014).
• Toz Metalurjisi Yöntemiyle Üretilen Alaşımsız Çeliklerde
• Sinterleme Ortamının Mekanik Özelliklere Etkisi, 15th
• International Materials Symposium (IMSP’2014), P.Ü., Denizli.
• Gladman, T., (1997). The physical metallurgy of microalloyed
• steels, The Institue of Materials, 1-341, England.