Aysel YAZICI

2120

Toprak İşleme Araçlarında Aşınma Konusunun Değerlendirilmesi: Araştırma Bulgularının Tarım Sektörüne Aktarılmasındaki Kısıtlamalar ve Çözüm Önerileri

Çalışmanın amacı, toprak işleme makineleri konusunda yapılan aşınma çalışmalarının bilimsel seyrini sunmak ve araştırma sonuçlarını çiftlik sistemlerine aktarılmasında karşılaşılan temel kısıtlamaları ve çözüm önerilerini değerlendirmektir. Bu çalışmada, son yüzyılda toprak işleme makinelerindeki aşınma kayıplarını analiz etmek ve azaltmak için yapılan çalışmalar kronolojik olarak sunulmuştur. Çalışmanın ilk aşamasında bu alandaki bilimsel gelişmelerin seyrinin sunulması amaçlanmıştır. İkinci aşamada, bilimsel araştırma sonuçlarının tarım sektörüne yansıması Türkiye açısından değerlendirilmiştir. Yapılan incelemeler sonucunda, malzeme bilimi alanındaki gelişmelerin toprak işleme araçlarının aşınma direncini geliştirmeye yönelik araştırma çalışmalarına yansıdığı ve çalışmaların genellikle ısıl işlemler ve kaplamalar konuları üzerinde yoğunlaştığı görülmektedir. Küçük-orta ölçekli çiftliklerin ekonomik refah düzeyi ve küçük-orta ölçekli makine üretici firmaların zayıf finansal yapılarının araştırma sonuçlarının çiftlik sistemlerine aktarılmasındaki en önemli kısıtlar olduğu görülmektedir. Sonuç olarak; küçük-orta ölçekli çiftliklerin zayıf ekonomik satın alma gücünü, ve küçük-orta ölçekli makine üreticilerinin zayıf finansal yapılarını güçlendirmeye yönelik politikaların geliştirilmesi ve makine üretim maliyetleri azaltmak için otomasyona uygun yeni üretim teknolojileri kullanımı önerilebilir.
Anahtar Kelimeler:

Tarım Sektörü, Tarım Makinaları Üreticileri, Küçük-Orta Ölçekli Çiftliklerin Problemleri, Toprak İşleme Makinaları, Aşınma

Review of Wear on Tillage Tools: Constraints in Transferring of the Research Findings to the Agricultural Sector and Solution Proposals

The aim of the study is to present the course of scientific developments of wear studies in soil tillage tools and to evaluate basic constraints in transferring the research results to the farm systems and the solution proposals. In this study, the studies conducted to analyze and reduce the wear losses in soil tillage tools in the last century are presented chronologically. Hereby, in the first stage of the study, it is aimed to present the course of scientific developments in this field. In the second phase, the reflection of the scientific research results in the agricultural sector was evaluated for Turkey. As a result of the investigation, it is observed that the developments in the field of materials science have been reflected in research aiming to improve the wear resistance of agricultural tillage tools and studies generally have focused on heat treatments and coatings. It is understood that the level of the economic prosperity of small-medium-sized farms, and the poor financial structures of small-medium-sized machinery manufacturers are the most important constraints in transferring the research results to the farm systems. As a result of the study; development of policies to strengthen the weak economic purchasing power of small-medium scale farms, and the weak financial structures of small-medium scale machinery manufacturers, and to reduce costs using new production technologies suitable to automation can be suggested.
Keywords:

Agricultural Sector, Agricultural Machinery Manufacturers, Problems of Small-Medium Scale Farms, Tillage Tools, Wear,

PDF

___

  • Abd El-Hameid, R.G. 2016. Development of a mathematical model to predict wearing and energy requirements of some treated tillage tools. Ph.D.,Alexandria University, Egypt.
  • Ali, W. Y., and Ezzat, F. M. H. 1994. Wear of tillage tools coated by thermoplastic coatings. Wear, 173 (1-2):115-119. doi:10.1016/0043-1648(94)90263-1
  • Alwan, A. S., and Hussan, W. K. 2014. Study the Effect of Heat Treatment on Abrasive Wear with Silt clay loam Soil Texture. International Journal of Engineering Sciences and Research Technology, 3 (12): 40-44.
  • Arifa, W., Aulin, V., and Shepelenko, I. 2015. Improvements of harrows wear resistance. International Journal of Agricultural Research, Innovation and Technology, 5 (2): 70-74. doi:10.3329/ijarit.v5i2.26275
  • Banaj, D., M.Vujčić., Emert, R., and Duvnjak, V. 2000. Material wear of cultivator shovels. Strojarstvo, 42(3):119-126.
  • Barnes, K. K. 1971. Compacting of agricultural soils, ASAE.
  • Bayhan, Y. 2006. Reduction of wear via hardfacing of chisel ploughshare. Tribology International, 39 (6): 570–574. doi: 10.1016/j.triboint.2005.06.005
  • Bednář, R., Votava, J., Červinka, J., and Fajman, M. 2013. Suitability of technical materials for machinery subsoilers for soil tillage, Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 61(1): 9-16. doi:10.11118/actaun201361010009
  • Bedollaa, P. O., Vorlaufer, G., Rechbergerb, C., Bianchi, D., Eder, S.J., Polak, R., and Pauschitz, A. 2018. Combined experimental and numerical simulation of abrasive wear and its application to a tillage machine component. Tribology International, 127:122-128. doi:10.1016/j.triboint.2018.03.019
  • Bhakat, A.K, Mishra, N. S., Mishra, S. H., and Jha, S. 2004. Metallurgical life cycle Ssessment through prediction of wear for agricultural grade steel. Wear, 257 (3): 338-346. doi:10.1016/j.wear.2004.01.003
  • Bhakat, A. K., Mishra, A. K., and Mishra, N. S. 2007. Characterization of wear and metallurgical properties for development of agricultural grade steel suitable in specific soil conditions. Wear, 263 (1-6): 228-233. doi:10.1016/j.wear.2006.12.006
  • Bobobee, E. Y. H., and Gebresenbet, G. 2007. Effect of cutting edge thickness and state of wear of ploughshare on draught force and heart rates of Sanga oxen in Ghana. Soil and Tillage Research, 95 (1-2): 298-307. doi:10.1016/j.still.2007.01.006
  • Bobobee, E. Y. H., Sraku-Lartey, K., Fialor, S. C., Canacoo, E. A., Agodzo, S. K., Yawson, A., and Gebresenbent, G. 2007. Wear rate of animal-drawn ploughshares in selected Ghanaian soils. Soil and Tillage Research, 93(2):299-308. doi:10.1016/j.still.2006.05.004
  • Březina, R., Filípek, J., and Šenberger, J. 2018. Application of ductile iron in the manufacture of ploughshares. Research in Agricultural Engineering, 50 (2):75-80. doi:10.17221/4930-RAE
  • Brown, S.W., and Baker, C.J. 1986. Wear characteristics of a direct-drilling opener, Soil and Tillage Research, 6 (3): 247-260.
  • Burwell JT (1957/58). Survey of possible wear mechanisms, Wear, 1, 119–141.
  • Cucinotta, F., Scappaticci, L., Sfravara, F., Morelli, F., Marianie, F., et al. (2019). On the morphology of the abrasive wear on ploughshares by means of 3D scanning. Biosystems Engineering, 179: 117-125. doi:10.1016/j.biosystemseng.2019.01.006
  • Carleton, W. M., and Martin, J.W. 1945. Sharpening and hard surfacing plow and lister Shares. Kansas Engineering Experiment Station, Manhattan, Bull, 44.
  • Chahar, V. K.2006. Studies on Wear Characteristics of Cultivator Shovels. Ph.D. MPUAT,Udaipur. Chernoivanov, V. I., Ljaljakin, V. P., Aulov, V. F., Ishkov, A.V., Krivochurov, N. T., Ivanajsky V.V., Koval, D. V., and Sokolov, A. V. (2015). Features of wear of agricultural machinery components strengthened by Fe n-B-Fe-B composite boride coatings. Journal of Friction and Wear, (2015) 36: 132. doi:10.3103/S106836661502004X
  • Cooper, A. W., and McCreery, W. F. 1961. Plastic surface for tillage tools, ASE paper no 61:649.
  • Derafshpour, S., and Mogaddam, A.P. 2013. investigation of blade's wears of chisel plow in a silty clay soils. Journal of Researches in Mechanics of Agricultural Machinery, 2 (2): 33-47 (in Arabic with an abstract in English).
  • Er, U., and Par B., 2006. Wear of plowshare components in SAE 950C steel surface hardened by powder boriding. Wear, 261 (3-4): 251–255. doi:10.1016/j.wear.2005.10.003
  • Erdiller, B., ve Çetinkaya, V. 1994. Pulluk uç demirlerinde aşınmaya karşı dayanımlarının belirlenmesi ve iyileştirilme imkanları üzerinde araştırmalar. 15. Ulusal Tarımsal Mekanizasyon ve Enerji Sempozyumu Bildiri Kitabı; Bornova, İzmir.
  • Ferguson, S. A., Fielke, J. M., and Riley, T. W. 1998. Wear of cultivator shares in abrasive South Australian soils. Journal of Agricultural Engineering Research, 69 (2): 99-105. doi:10.1006/jaer.1997.0182
  • Fielke, J. M., Riley, T. W., Slattery, M. G., and Fitzpatrick, R.W. 1993. Comparison of tillage forces and wear rates of pressed and cast cultivator shares. Soil and Tillage Research, 25 (4): 317–328. doi:10.1016/0167-1987(93)90030-S
  • Fielke, J. M. 1996. Interactions of the cutting edge of tillage implements with soil. Journal of Agricultural Engineering Research, 63 (1): 61–71. doi:10.1006/jaer.1996.0008
  • Foley, A. G., Lawton, P. J., Barker, A. W., and Mclees, V. A. 1984. The use of alumina ceramic to reduce wear of soil-engaging components. Journal of Agricultural Engineering Research, 30: 37-46. doi:10.1016/S0021-8634(84)80004-9
  • Foley, A. G., Chisholm, C. J., and Miclees, V. A. 1988. Wear of ceramic protected agricultural subsoilers. Tribology International, 21(2): 97-103.doi:10.1016/0301-679X(88)90081-3
  • Fouda, T., and Tarhuny M. E. 2007. A Study on ploughshares wearing behavior under conditions of sandy loam soil. Misr Journal of Agricultural Engineering, 24(4): 831-848.
  • Fox, W. R., and Bockhop, C. W. 1965. Characteristics of a teflon-covered simple tillage tool. Transaction of the ASAE, 8 (2): 227-229.
  • Gallwitz, K. 1930. Werkstoffe und abnutzung von pflugscharen. Landwirtschaftliche Jahrbücher, 72, pp. 1-50 (in Deutsch).
  • Gavrilov, F. L., and Koruschkin, E. N. 1954. The underside chamfer of plough shares, Selkhozmashina, 3: 18-21.
  • Gilbert, F. 2010. Jethro Wood, Inventor of the Modern Plow: A Brief Account of His Life, Services and Trials (1882), Kessinger Publishing, Whitefish MT, United States.
  • Gill, W. R., and Berg, G. E. V. 1967. Soil dynamics in tillage and traction, Agricultural Research Service United States Department of Agriculture, Agriculture Handbook No 316.
  • Goel, G. S. 2013. A numerical study of tillage tool wear during plowing of sandy soil. Ph.D., University of North Carolina, USA.
  • González, H., Cappelli, N., and Toro, A. 2013. Wear of rotary plows operating in a tropical clay loam soil. Engenharia Agrícola, 33(4):772-781. doi:10.1590/S0100-69162013000400017
  • Gupta, P. D., Gupta, C. P., and Pandey, K. P. 1989. Performance evaluation of wide cutting tillage tools of different geometry for dryland farming. Soil and Tillage Research, 14 (2): 145–162. doi:10.1016/0167-1987(89)90028-7
  • Gupta, A. K., Jesudas, D. M., Das, P. K., and Basu, K. 2004. Performance evaluation of different types of steel for duck foot sweep application. Biosystems Engineering, 88 (1): 63-74. doi:10.1016/j.biosystemseng.2004.01.013
  • Heffer, G. 1994. Wear of agricultural machinery parts in contact with soil. In: Proceedings of the international conference. Actual Tasks on Agricultural Engineering; Opatija, Croatia. pp. 27–34.
  • Hoffman, A. H. 1922. Wearing tests of plowshares. Agricultural Engineering, 3: 83
  • Horvat, Z., Filipovic, D., Kosutic S., and Emert, R. 2008. Reduction of mouldboard plough share wear by a combination technique of hardfacing, Tribology International, 41(8): 778-782. doi:10.1016/j.triboint.2008.01.008
  • Hrabě, P., and Müller, M. 2013. Research of overlays influence on plough-share lifetime. Research in Agricultural Engineering, 59 (4):147-152. doi:10.17221/3/2013-RAE
  • Hrabě, P., Müller M., and Hadač, V. 2015. Evaluation of techniques for ploughshare lifetime increase. Research in Agricultural Engineering, 61(2): 72-79. doi:10.17221/73/2013-RAE
  • Ivusic, V., and Jakovljevic, M. 1992. Protection of agricultural machinery from wear. In: Proceedings of the international conference, Science and Practice of Agricultural Engineering; Djakovo, Croatia. pp. 275–283.
  • Jankauskas, V., E. Katinas., Skirkus,.,R. and Alekneviciene, V. 2014. The method of Hardening soil rippers by surfacing and technical-economic assessment. Journal of Friction and Wear, 35 (4): 270-277, doi:10.3103/S106836661404014X.
  • Jia, X., and Ling, X. 2005. Reduction of soil resistance through the use of a composite coating, Journal of Coatings Technology and Research, 2: 669-672. doi:10.1007/BF02774596
  • Kang, A.S., Grewal J. S., Deepak, J., and Kang, S. 2012. Wear behavior of thermal spray coatings on rotavator blades. Journal of Thermal Spray Technology, 21 (2): 355-359. doi:10.1007/s11666-011-9709-y
  • Kang, A. S., Cheema, G. S., and Singla, S. 2014. Wear behavior of hardfacings on rotary tiller blades. Procedia Engineering, 97: 1442-1451. doi:10.1016/j.proeng.2014.12.426
  • Kang, A.S., Grewal, J. S., and Cheema, G. S. 2017. Effect of thermal spray coatings on wear behavior of high tensile steel applicable for tiller blades, Materials Today: Proceedings, 4 (2): 95-103. doi:10.1016/j.matpr.2017.01.001
  • Karamış, M. B.1985. Toprak İşleme Aletlerinde İş Organının Aşınmasının Etüdü. Ph.D, Erciyes Üniversitesi, Türkiye.
  • Karatish, A. 1955. The wear of the working elements of soil cultivation implements. Mashiuo-traktomdia Sta, 15: 30-32.
  • Karoonboonyanan, S., Salokhe, V. M., and Niranatlumpong, P. 2007. Wear resistance of thermally sprayed rotary tiller blades. Wear, 263, 604-608. doi:10.1016/j.wear.2006.12.072
  • Kassam, A., Friedrich, T., and Derpsch, R. 2019. Global spread of conservation agriculture. International Journal of Environmental Studies, 76:1, 29-51. doi:10.1080/00207233.2018.1494927
  • Kaur, R., Dhaliwal, I. S., and Singh, A. 2011. Studies on the wear performance of different materials of rotary blades. Journal of Research SKUAST-J, 10 (1): 24-32.
  • Kelly, P. J., Vom Braucke, T., Liu, Z., Arnell, R.D., and Doyle, E.D. 2007. Pulsed DC titanium nitride coatings for improved tribological performance and tool life. Surface and Coatings Technology, 202(4):774-780. doi:10.1016/j.surfcoat.2007.07.047
  • Kendall, E. C.1959. John Deere's Steel Plow, Smithsonian Institution.
  • Kolomeichenko, A. V., and Titov, N. V. 2014. Investigation of hardness of tillage tools being hardened by carbo-vibro-arc method with paste application. Vestn. OrelGAU, 6: 96–101.
  • Korucu, T., and Arslan, S. 2008. Kültivatör uç demirlerinde farklı asınma oranları ve ilerleme hızlarının çeki kuvvetine etkisi (The Effect of Wear Rate of Cultivator Shares and Operating Speed on Draught Force Requirements). KSU Doğa Bilimleri Dergisi, 11 (1): 82-88 (in Turkish with an abstract in English).
  • Kostencki, P., Stawicki, T., and Białobrzeska, B. 2016. Durability and wear geometry of subsoiler shanks provided with sintered carbide plates. Tribology International, 104, 19-35. doi:10.1016/j.triboint.2016.08.020.
  • Koszeghy, G. 1964. Some questions of investigations on rotary cultivators. Journal of Farm Machinery, 11: 220-226.
  • Kummer, F. A. 1938. The dynamic properties of soil: A study of the nature of physical forces governing the adhesion between soil and metal surfaces. Agricultural Engineering, 19: 73-78.
  • Kurchania, A. K. 1997. Abrasive wear of cultivator shovels affected by soil, tool and operating parameter. Ph.D., GBUA&T, Panthnagar
  • Kushwaha, R. L., Chi, L. and Roy, C. 1990. Investigation of agricultural tools with plasma sprayed coatings. Tribology International, 23(5): 297–300.
  • Kushwaha, R. L., and Shen, J. 1991. Investigation of wear of agricultural tillage tools. Journal of Society of Tribologists and Lubrication Engineers, 47(3): 219–22.
  • Kühne, G. 1931. Vergleichende untersuchungen an schar-werkstoffen. Die technik in der landw, 12 [7]: 200-202.
  • Mahapatra, N. 2007. Wear characteristics of rotavator tynes for power tillers. Ph.D., Indian Institute of Technology, Kharagpur.
  • Malvajerdia, S. S., Malvajerdib, A. S., and Ghanaatshoara, M. 2019. Protection of CK45 carbon steel tillage tools using TiN coating deposited by an arc-PVD method. Ceramic International, 45: 3816-3822. doi:10.1016/j.ceramint.2018.11.051
  • Marani, S. M., Gholamhossein, S., and Moinfar, A. 2019. Effect of nano coating materials on reduction of soil adhesion and external friction. Soil and Tillage Research, 193: 42-49. doi:10.1016/j.still.2019.05.026
  • Marin, V., and Tomescu, D. 1972. Increasing the wear resistance of working member of The rottary tillers. Studii şi cercetări de mecanica Agricola, 6 (1): 33-52.
  • Milos, B., A. Pintaric and G. Buljan. 1993. Abrasive wear of agricultural machinery parts. Proceedings of the International Conference, Tribology in Agriculture, Osijek, Croatia. pp. 44 – 48.
  • Mitsuhasi, T., Y. Imai and S. Yokoi. 1950. Study of wear of steel against soils. Journal of Mechanical Laboratory: 91-96.
  • Mohsenin, N. 1956. Development of an accelerated wear test for tillage tool materials and its application to ordinary cast iron and nodular iron. Ph.D., Michigan State University of Agriculture and Applied Science, USA.
  • Mohsenin, N., and Womochel, H. L. 2005. Wear tests of plough share materials. Journal of Agricultural Engineering, 25: 816-820.
  • Mutaf, E., ve Ulusoy, E. 1977. Toprak İşleme Aletlerinin İş Organlarında Kullanılan Bazı Çeliklerin Farklı Isıl İşlemlere Göre Laboratuvar ve Tarla Şartlarında Aşınma Dirençleri. TÜBİTAK Yayın No: 227, Ankara.
  • Murthy, N. R. K. 1987. Abrasive wear of cultivator shovel in soils. Ph.D., Agricultural and Food Enginering, IIT, Kharagpur.
  • Nalbat, M., and Palalı, A. T. 2011. Effects of different material coatings on the wearing of plowshares in soil tillage. Turkish Journal of Agriculture and Forestry, 35 (3):215-223. doi:10.3906/tar-0904-30
  • Natsis A., Papadakis, G., and Pitsilis, J. 1999. The influence of soil type, soil water, and share sharpness of a mouldboard plough on energy consumption, rate of work, and tillage quality. Journal of Agricultural Engineering Research, 72 (2): 171‐176. doi:10.1006/jaer.1998.0360
  • Natsis, A., Petropoulos, G., and Pandazaros, C. 2008. Influence of Local Soil Conditions on Mouldboard plougshare abrasive wear. Tribology International, 41 (3):151-157. doi:10.1016/j.triboint.2007.06.002
  • Nichols, M. L.1930. Dynamic properties of soil affecting implement design. Agricultural Engineering, 11: 201-204.
  • Nichols, M. L. 1931. The Dynamic Properties of Soils, II. Soil and Metal Friction. Agricultural Engineering, 12: 321-324.
  • Novikov, A. E., Motorin V. A., Lamskova M. I., and Filimonov M. I. 2018. Composition and tribological properties of hardened cutting blades of tillage machines under abrasive deterioration, Journal of Friction and Wear, 39 (2): 158–163. doi:10.3103/S1068366618020137
  • Owsiak, Z. 1997. Wear of symmetrical wedge-shaped tillage tools, Soil and Tillage Research, 43 (3-4): 295-308. doi:10.1016/S0167-1987(97)00020-2
  • Owsiak, Z. 1999. Wear of spring tine cultivator points in sandy loam and light clay soils in southern Poland. Soil and Tillage Research, 50: 333-340. doi:10.1016/S0167- 1987 (99) 00019-7.
  • Önal, İ., Uçucu, R., ve Aykas, E. 1994. Öngörülen alet- makine setlerinde arıza olasılıklarının belirlenmesi ve arıza gruplarının çözümlenmesi. Başbakanlık Güneydoğu Anadolu Projesi Bölge Kalkınma İdaresi Başkanlığı, GAP Bölgesinde Tarımsal Mekanizasyon Gereksinimleri Etüdü Projesi TEMAV 3. Seminer Görev No C-1, Ankara.
  • Pyndak, V. I., and Novikov. A. E. 2016. Tribotechnical and energy assessment of parts of Working members of cultivating machines after carburizing and laser hardening. Metal Science and Heat Treatment, 58 (3–4): 226-230. doi:10.1007/s11041-016-9994-7
  • Quick, G. R., Woods, C.R., Bartlett, N. R. 1979. Effects of speed and other parameters on lineal share wear. Agricultural Engineering Australia, 8 (2):109-117.
  • Quirke S., Scheffler, O., and Allen, C.1988. An evaluation of the wear behaviour of metallic materials subjected to soil abrasion. Soil and Tillage Research, 11 (1): 27-42. doi:10.1016/0167-1987(88)90029-3
  • Richardson, R. C. D. 1967. The wear of metallic materials by soil-practical phenomena. Journal of Agricultural Engineering Research, 12 (1): 22-39
  • Salokhe, V. M., Chuenpakaranant, W., and Niyampa, T. 1999. Effect of enamel coating on the performance of a tractor drawn rotavator. Journal of Terramechanics, 36 (3): 127-138. doi:10.1016/S0022-4898(99)00002-6
  • Schulze, J.1969. Untersuchungen über die häufigkeit der schadensarten bei ausgewaehlten erzeugnissen, Deutsche Agrartechnik, 19 (4): 187-190.
  • Silveira, G. M. 1973. Desgastes em cultivadores, Engenharia Agricola, 2 (1): 14-18.
  • Singh, D., Saha, K. P., and Mondal, D. P.2011. Development of mathematical model for prediction of abrasive wear behaviour in agricultural grade medium carbon steel. Indian Journal of Engineering and Materials Sciences, 18 (2): 125-136.
  • Singh, S., J. Garga., P. Singh., G. Singh., K. Kumar., J. Singh., S. Kumar and J. Pal Singh. 2018. Effect of hardfaced Cr-alloy on abrasive wear of low carbon rotavator blades using design of experiments, Materials Today: Proceedings 5, (2) Part 1: 3390–3395. doi:10.1016/j.matpr.2017.11.583
  • Singh, D., Nandede, B. M., Raul, A. K., Singh, R. S. 2018. Effect of heat treatment on wear rate of different agricultural grade steels and associated cost economics. Economic Affairs, 63(1): 203-208. doi:10.30954/0424-2513.2018.00150.25
  • Singh, J., Chatha, S. S., and Sidhu, B. S. 2020. Tribological performance of hardfaced and heat treated EN-47 steel used for tillage applications. Surface Topography Metrology and Properties, 8:1-16. doi: 10.1088/2051-672X/abbb7f
  • Singh, J., Chatha, S. S., and Sidhu, B. S. 2020. Abrasive wear behavior of newly developed weld overlaid tillage tools in laboratory and in actual field conditions. Journal of Manufacturing Processes, 55:143-152. doi.org/10.1016/j.jmapro.2020.03.040
  • Skirkus, R., and Jankauskas, V. 2015. Wear model development of soil tillage element. Agricultural Engineering, 47:1-5
  • Soane, B. D. 1970. The effects of traffic and implements on soil compaction. The Agricultural Engineering, 25 (3):115-126.
  • Stawicki, T., Białobrzeska, B., and Kostencki, P. 2017. Tribological properties of plough shares made of pearlitic and martensitic steels, Metals, (4): 139-159 doi:10.3390/met7040139
  • Stawicki, T., Kostencki, P., and Białobrzeska, B. 2018. Wear resistance of selected cultivator coulters reinforced with sintered-carbide plates, Archives of Civil and Mechanical Engineering, 18 (4): 1661-1678. doi:10.1016/j.acme.2018.07.005
  • Stroppal, T. 1961. Über die Güte, den verschleiss und die schneiden form fabrikneuer pflugschare, Grundlageder landtechnik, H 13:35-43.
  • Sukumaran, J., Kalácska, A., Neis P. D., Fauconnier, D., and Baets, P.D. 2019. From single asperity to real scale in the wear of agricultural tine. Wear, 426–427 Part A: 14-26. doi:10.1016/j.wear.2018.12.014
  • Tabrizi, M. B., Hashemi, S. J., and Karimi, R. 2017. Analytical and experimental draft force evaluation of plastic coated chisel tines. Journal of Agricultural Machinery, 7 (2):480-490 doi:10.22067/jam.v7i2.53445
  • Tribble, R. T.1958. The teflon covered mouldboard plow. ASAE paper no. 58-615
  • Ulusoy, E. 1981. Bazı Toprak Işleme Alet Ve Makinelerinde Iş Organının Aşınması Üzerinde Araştırmalar. Ege Üniversitesi Ziraat Fakültesi Yayınları, No: 391, İzmir. Vlăduţoiu, L., Vlăduţ, V., Voiculescu, I., Matache, M., Radu, O., et. al.,2015. Increasing agricultural machinery active parts durability by hardening. 43. International Symposium on Agricultural Engineering; Opatija, Croatia. doi:10.13140/RG.2.1.3623.1200
  • Yazici, A. 2011a. Wear behavior of carbonitride-treated ploughshares produced from 30MnB5 steel for soil tillage applications. Metal Science and Heat Treatment, 53 (5-6): 248-253. doi:10.1007/s11041-011-9377-z
  • Yazıcı, A. 2011b. Investigation of the reduction of mouldboard ploughshare wear through hot stamping and hardfacing processes. Turkish Journal of Agriculture and Forestry, 35 (5): 461-468 doi:10.3906/tar-1105-29.
  • Yazıcı, A. 2012. Investigation of the wear behavior of martempered 30MnB5 steel for soil tillage. Transaction of the ASABE, 55 (1): 15-20. doi:10.13031/2013.41243
  • Yazici, A., Zeybek, M. S., Güler, H., Koç, M., and Pekitkan, F.G. 2017. Effect of carbonitriding on corrosion resistance of steel 30mnb5 in two acidic environments. Metal Science and Heat Treatment, 59 (3-4): 190-193, doi:10.1007/s11041-017-0127-8.
  • Yazici, A., and Çavdar, U. 2017. A study of soil tillage tools from boronized sintered iron. Metal Science and Heat Treatment, 58 (11-12): 753-757, doi:10.1007/s11041-017-0091-3.
  • Yazıcı, A., Zeybek, M.S.., Güler, H., Pınar, A. M., and Tücer, R., 2017. Corrosion resistance and mechanical properties of quenched and tempered 28MnCrB5 steel in two acidic environments. Materials Testing, 59 (3): 221-225, doi:10.3139/120.110986
  • Yu, H. J., and Bhole, S. D. 1990. Development of a prototype abrasive wear tester for tillage tool materials. Tribology International, 23 (5): 309-316. doi:10.1016/0301-679X(90)90004-9
  • Zein El-Din, A.M., Saad F Ahmed., and Abd El-Hameid R. G. 2016. Effect of new hard facing materials of tillage tools on draft and roughness. Alexandria Engineering Journal, 61 (3):243-251.
  • Zhang, J., Kushwaha, R. L. 1995. Wear and draft of cultivator sweeps with hardened edges. Journal of Canadian Agricultural Engineering, 37: 41–47.
  • Zhang, J. B., Tong J., and Ma, Y-H. 2015. Abrasive wear characteristics of subsoiler tines with bionic rib structure surface. Journal of Jilin University (Engineering and Technology Edition), 45(1):174-180. doi:10.13229/j.cnki.jdxbgxb201501026
  • Zhang, L. B., Cai, Z. X.., and Liu, H. F. 2018. A novel approach for simulation of soil-tool interaction based on an arbitrary Lagrangian–Eulerian description. Soil and Tillage Research, 178:41-49. doi:10.1016/j.still.2017.12.011
  • Zheng, G., Ota, Y., Hiroma, T., and Kataoka, T.1996. Wear resistance of cultivator tine (part 2) - Effects of tine parameters on wear resistance. Journal of The Japanese Society of Agricultural Machinery, 58 (4):79-86.
  • Zink, F. J., Sellers, G. A., and Roberts J. 1936. Results of studies of the cutting edges of tillage implements. Agricultural Engineering :93-97.
  • URL- 1. FAO.2015. “The Economic Lives of Smallholder Farmers, an Analysis Based on Household Data from Nine Countries”. Accessed 28 April 2020. Available at:http://www.fao.org/3/a-i5251e.pdf
  • URL-2. OECD. 2018. “Agricultural Policy Monitoring and Evaluation”. Accessed 28 April 2020. Available at: https://doi.org/10.1787/agr_pol-2018-en
  • URL-3. TAGEM. 2018. “Tarımsal Mekanizasyon Sektör Politika Belgesi”. Accessed 13 September 2020. Available at: http://www.tarimorman.gov.tr/TAGEM/Belgeler/yayin/Tar%C4%B1msal%20Mekanizasyon%20Sekt%C3%B6r%20Politika%20Belgesi%202018-2022.pdf
  • URL-4. TARMAKBİR 2019. Türkiye Tarım Makinaları Sektörü, Sektör Raporu”. Accessed 28 April 2020. Available at: http://www.tarmakbir.org/haberler/tarmakbirsekrap.pdf
Tarım Makinaları Bilimi Dergisi-Cover
  • ISSN: 1306-0007
  • Başlangıç: 2005
  • Yayıncı: Tarım Makinaları Derneği
Arşiv
Sayıdaki Diğer Makaleler

Farklı Ağırlığa Sahip Yumurtaların İç ve Dış Kalite Özelliklerinin Belirlenmesi

Esra Nur GÜL, Ebubekir ALTUNTAŞ, Resul DEMİR

Hasarsız Çarpma Tekniği Kullanarak Elma Meyvesinin Kütle Tahmini

Ecenur TÜDEŞ, Kubilay VURSAVUŞ

Toprak İşleme Araçlarında Aşınma Konusunun Değerlendirilmesi: Araştırma Bulgularının Tarım Sektörüne Aktarılmasındaki Kısıtlamalar ve Çözüm Önerileri

Aysel YAZICI