Determination of Effects of Cleaning fan speed and forward speed on Grain losses during the rapeseed harvesting by combine

Determination of Effects of Cleaning fan speed and forward speed on Grain losses during the rapeseed harvesting by combine

Grain losses during the rapeseed harvest by combine are important level that rapeseed is an important oil plant. Grain losses have been reaching up to 20-30 % during the harvest because of both its 1000 kernel weight varies 2.5-5.5 g that its grains are pretty small and its cultivation techniques haven’t been known by the farmers exactly. It has been aimed to determine the effects of cleaning fun speed and forward speeds on grain losses during the rapeseed harvest by combine in this study. For this purpose, field experiments were conducted in experiment fields of the Black Sea Agricultural Research Institute in Samsun between the years 2007-2010. Combine having 4.8 m working width were used in the experiments. The rapeseed cultivar Elvis was used in the research. The study was designed in split parcels in randomized blocks. Studies were conducted according to 3, 4 and 5 km.h-1 forward speeds and 400, 500, 600 rpm cleaning fun speed. As a result of the study it was established that the most available forward speed was 4 km.h-1 and cleaning fan cycle was 500 rpm.

___

  • Anonim, 2011a. Bitkisel Yağ Sanayicileri Derneği Türkiye İstatistikleri. http://www.bysd.org.tr/Istatistikler.aspx. (Erişim: Mart 2011).
  • Anonim, 2011b. Biyodizel Üretimi Hızla Artıyor. http://www.tarimsal.com/tarimhaberleri/Biyodizel_uretim i_hızla_artiyor.htm. (Erişim: Mart 2011).
  • Bridges, C. B., P, L. Raymer, 1992. Preharvest and Combine Seed Losses in Canola: Effect of Chemical Harvest Aid and Swathing. http://pubs.caes.uga.edu.
  • Duane R. B., Z. Mark, H. Bryan, 1999. Swathing and Harvesting Canola.
  • http://www.ag.ndsu.edu/pubs/plantsci/crops/a1171w.ht m. (Erişim: Mart 2011).
  • Domitru, M., 2009. Researches on grain harvesting machines. Bulletin UASVM Agriculture, 66(1)/2009. 327-331.
  • Gizlenci, Ş., M. Acar, H. Duran., M, Şahin., İ, Dursun, 2011. Kolza Hasadında Biçerdöver Tane Kayıplarının Araştırılması. T.C. Gıda Tarım ve Hayvancılık Bakanlığı TAGEM Proje Sonuç Raporu.
  • Gizlenci, Ş., M. Dok., M. Acar, 2005a . Orta Karadeniz Sahil Kuşağında Kolza İçin En Uygun Sıra Aralığının Belirlenmesi. Hasat Dergisi Eylül 2005, Sayı: 244, 88-94.
  • Gizlenci, Ş., A. Korkmaz, M. Acar, M., F. Seyis, 2005b. Kolza (Kanola) Tarımı. Samsun. Ss.84
  • Gulden, R. H., S. J. Shirtliffe, 2003. Harvest Losses of Canola (Brassica napus) Cause Large Seedbank. Weed Science 51 (1): 83-86.
  • Ferreira, D. B., O., Ferreria, A. D. S., Alonço, H. Bley, 2001. Grain Loss Monitoring During all Harvest Season (Gathering and Processing Losses), in the Irrigated Rice Crop and its Results in Reducing Losses Due to Immadiate Adjustment in the Combines. http://asae.frymulti.com.
  • Hassani, H. S., A. Jafari, S. S. Mohtasebi, A. M. Setayesh, 2011. Investigation on Grain Losses of the JD 1165 Combine Harvester Equipped with Variable Pulley and Belt for Forward Travel. http://www.cabdirect.org. (Erişim: Mart 2011).
  • Sitkei, G., 1986. Mechanics of Agricultural Materials. Akademiai Kiado, Budapest.
  • Żak, W., 1995. Optimum technological parameters of twostage harvesting of rape. http://www.cabdirect.org. (Erişim: Mart 2011).
Tarım Makinaları Bilimi Dergisi-Cover
  • ISSN: 1306-0007
  • Başlangıç: 2005
  • Yayıncı: Tarım Makinaları Derneği
Sayıdaki Diğer Makaleler

Tarım Makinaları İmalat Sektörümüzün Üniversite-Sanayi İşbirliğinden Beklentileri

Ediz ULUSOY, M. Selami İLERİ

Possibility of applying central milking system in villages

Erkan GÖNÜLOL, Poyraz ÜLGER, Cihan DEMİR

Pamuk Saplarının Hidrolik Tip Preste Briketlemesi Üzerine Bir Çalışma

H.Emre AKMAN, Sefai BİLGİN

Bağ İlaçlamasında Kullanılan Bazı Meme Tiplerinin Kontrollü Koşullar Altındaki Etkilerinin Karşılaştırılması

Erkan URKAN, Müjdat TOZAN, Hüseyin GÜLER

Biçerdöver ile Kolza Hasat Harmanında İlerleme Hızı ve Vantilatör Devir Sayısının Tane Kaybı Üzerine Etkilerinin Belirlenmesi

Şahin GİZLENCİ, Mustafa ACAR, Hüseyin DURAN, Mevlüt ŞAHİN, İlknur DURSUN

Pnömatik Tahıl Ekim Makinası ile Buğday Ekiminde Makina Performansının Belirlenmesi

Arzu YAZGI, Zeynep DUMANOĞLU, Nebahat KULDEMİR, İkbal DERELİ AYGÜN, Abbas MASOUMI

Determination of Effects of Cleaning fan speed and forward speed on Grain losses during the rapeseed harvesting by combine

İlknur DURSUN, Hüseyin DURAN, Mevlüt ŞAHİN, Şahin GİZLENCİ, Mustafa ACAR

Evaluation of agricultural machinery obtained via financial support

Mustafa VATANDAŞ, Caner KOÇ, Ali Bülent KOÇ

Traktör Şanzıman Tasarım Parametrelerinin Belirlenmesi

Engin AKIN, Bahattin AKDEMİR

Buğday Üretiminde Farklı Toprak İşleme – Ekim Sistemlerinin Enerji Kullanım Etkinliği Yönünden Karşılaştırılması

Zinnur GÖZÜBÜYÜK, Ahmet ÇELİK, İsmail ÖZTÜRK, Okan DEMİR, Mesut Cemal ADIGÜZEL