ANALYSIS OF MAGNETIC PERFORMANCE FOR MAGNETIZED PACKED AND UNPACKED BED

In this study, optimal levels of the magnetized packed bed design parameters on the magnetic performance have been obtained by using Taguchi experimental design approach. Given the associated the parameters such as the diameter of the bed elements (d), magnetic strength (H), and the bed length (L), the results estimate the effects on the magnetizing performance of the magnetized packed bed. The analysis of Taguchi method reveals that, magnetic strength and the diameter of the bed elements have significantly affected the magnetizing performance of the magnetized packed bed. Data obtained from Taguchi experimental design on the magnetic intensity of the bed resulted in the optimized process conditions of 280 kA/m as the magnetic strength, the bed length of 6 cm and the diameter of the bed elements 8 mm. Maximum magnetic intensity 0.606 T was obtained at the optimized conditions in the bed parameters. In addition, magnetic intensity values that called as magnetic performance values are corrected by the uncertainty analyses. Magnetic intensity in the magnetized packed bed adjusted with ASME PTC 19.1 uncertainty analysis methods. Although some partial fluctuations in the magnetic intensity are available as long as the bed, the general variation characteristics of magnetic characteristic property of the bed is constant.

Keywords:

Magnetized packed bed, uncertain analysis, Taguchi method, magnetic filter magnetic separation.,

PDF

___

[1] Hristov. J. Y.. “Fluidization of ferromagnetic particles in a magnetic field Part 1: the effect of field line orientation on bed stability”. Powder Technology. 87: 59-66. (1996).
[2] Abbasov. T.. “Magnetic filtration with magnetized granular beds: Basic principles and filter performance”. China Particuology. 5: 71–83. (2007)
[3] Sandulyak A. Sandulyak A. Ershova V. Polismakova M. Sandulyak D.. “Use of the magnetic test-filter for magnetic control of ferroimpurities of fuels. oils. and other liquids (phenomenological and physical models)”. Journal of Magnetism and Magnetic Materials. 426. 714–720. (2017)[4] Karadağ T.. Yildiz Z.. Abbasov T.. Sarımeşeli A.. “Estimation of magnetization properties of the ferromagnetic polly granular beds”. J Dispersion Science Technology. 31(6): 826-830. (2010)
[5] Karadag T., Bakir H. G., “Modeling of particle-capture mechanism of axial magnetic filter in bounded flow field with variable viscosity”, Particulate Science and Technology (2018).
[6] Huang S., Park H., Park Y. K., Jo Y. M., “Dynamic Trajectory and Capture of Fine Dust by Magnetic Mesh Filters Based on a Particle Velocity Model”, Aerosol Science and Technology, 49:633–642 (2015).
[7] Zengb H., Lia Y., Xuc F., Jiangb H., Zhangb W., “Feasibility of turbidity removal by high-gradient superconducting magnetic separation”, Environmental Technology, 36:19, 2495–2501 (2015).
[8] Yıldız Z.. Yuceer M.. Abbasov T.. “Performance prediction of the magnetic packed bed using response surface methodology”. Particulate Science and Technology. 31:181-185. (2013).
[9] Sandulyak D.A.. Snedkov A.B.. Sandulyak A.A.. Sandulyak A.V.. Ablaeva A.E.. “Functional Properties of Granular and Quasi-granular Ferromagnetic Material (Filter-matrix) in Magnetophoresis Technology”. Processing of the 4th International Conference on Materials Engineering for Advanced Technologies (ICMEAT). . 663-665. (2015).
[10] Ross P.. “Taguchi techniques for quality engineering-loss function. orthogonal experiments. parameter and tolerance design”. New-York: McGraw-Hill. (1998).
[11] Bendell A. Disney J. Pridmore W. A.. “Taguchi methods application in world application: industries. productivity. improvement and case study”. New York: IFS. (1989).
[12] Badkar D.. Pandey K.. Buvanashekaran G.. “Multıperformance optımızatıon of tensıle strength and heat ınput of laser transformatıon hardenıng of commercıally pure tıtanıum usıng taguchı methodology and utility concept”. Advances in Production Engineering & Management. 7 (3): 165-176. (2012)
[13] Akhgar B.N.. Pazouki M.. Ranjhar M.. Hosseinnia A.. Salarian R.. “Application of Taguchi method for optimization of syntheticrutile nano powder preparation from ilmenite concentrate”. Chemical Engineering Research and Design. 90: 220-228. (2012)
[14] Uysal A.. Altan M.. Altan E.. “Effects of cutting parameters on tool wear in drilling of polymer composite by Taguchi method”. Int. J Adv Manuf Technol 58. 915–921. (2012).
[15] The Specialist Committee on Uncertainty Analysis. Final Report and Recommendations to the 25th ITTC. 2: 433-471. (2008).
[16] Bhagat T. C.. Payal H.S.. Sethi B.L.. “Optimizations of EDM process parameters for surface roughness machining die steel using copper tungsten electrode by adopting Taguchi array design”. Indian Journal of Science and Technology (5)10:428- 3432. (2012).
[17] Baligidad S. M. , Chandrasekhar U., Elangovan K., Shankar S., “Taguchi’s Approach: Design optimization of process parameters in selective inhibition sintering” Materials Today: Proceedings, 5:2, 4778-4786 (2018)
[18] Canbolat A. S., Bademlioglu A. H., Arslanoglu N., Kaynakli O., “Performance optimization of absorption refrigeration systems using Taguchi ANOVA and Grey Relational Analysis methods”, Journal of Cleaner Production,229:874-885. (2019)
[19] Fatoba O. S.. Akanji O. L., Aasa A. S., “Optimization of carburized uns g10170 steel process parameters using taguchi approach and response surface model (RSM)”. Journal of Minerals and Materials Characterization and Engineering. 2: 566-578. (2014).

Sigma Mühendislik ve Fen Bilimleri Dergisi-Cover

ISSN: 1304-7191
Yayın Aralığı: Yılda 4 Sayı
Yayıncı: Yıldız Teknik Üniversitesi

Arşiv