STRUCTURAL CHARACTERIZATION OF ACID AND BASE-CATALYZED SILICA XEROGELS

In this study, silica xerogels were synthesized by the sol gel method using TEOS (tetraethyl orthosilicate), ethanol, water and sulfuric acid as acidic catalyst and ammonia as basic catalyst. The structural characterizations of the synthesized acid-catalyzed silica xerogels (ACXs) and base-catalyzed silica xerogels (BCXs) were investigated by thermal gravimetric analysis (TGA), scanning electron microscopy (SEM) and N2 adsorption and desorption techniques. It was seen from TGA analyzes that the thermal decomposition process of silica xerogels consists of two steps. The SEM images show that the solid skeletal phase of ACXs has a globular morphology with primary particles that are joined together to form agglomerates. In contrast, SEM images of the BCXs indicate a hierarchical morphology with the clusters of these agglomerates organized into larger spherical particles. The pore size distributions (PSD) of ACXs and BCXs samples show a main peak in the micropore and micro-mesopore regions, respectively.

Keywords:

Silica xerogels, sol-gel method microporous materials, pore structure.,

PDF

___

[1] Brinker, C.J., Scherer, G.W. (1990) Sol-gel Science: the physics and chemistry of Sol-Gel processing, Academic Press. New York, 19901.
[2] Zarzycki, J. (1997) Past and Present of Sol-Gel Science and Technology, Journal of Sol-Gel Science and Technology (8), 17-22.
[3] Uhlmann, D.R. (1997) The Future of Sol-Gel Science and Technology, Journal of Sol-Gel Science and Technology (8), 1083-1091.
[4] Klein, L.C. (1988) Sol-Gel Technology for Thin Films, Fibers, Preforms, Electronics and Specialty Shapes, Noyes Publications, Park Ridge, NJ.
[5] Verganelakis, V., Nicolaou, P.D., Kordas, G. (2000) Processing and properties of glass strengthened by Ormosil coatings. Glass technology, (41), 22-29.
[6] Scherdel, C., Reichenauer, G. (2015) Highly porous silica xerogels without surface modification. The Journal of Supercritical Fluids, 106, 160-166.
[7] Ferauche, F., Winterton, N., & Alié, C. (2006). Characterization of low-density silica xerogel formed into microspheres. Journal of non-crystalline solids, 352(1), 8-17.
[8] Bryans, T.R., Brawner, V.L., Quiteves, E.L., (2000) Microstructure and Porosity of Silica Xerogel Monoliths Prepared by the Fast Sol-Gel Method, Journal of Sol-Gel Science and Technology (17), 211–217.
[9] Brinker, C.J., Scherer, G.W., (1990) Sol–Gel Science, The Physics and Chemistry of Sol–Gel Processing, Academic Press, New York.
[10] Filipovic, R., Obrenovic, Z., Stijepovic, I., Nikolic, L.M., Srdic, V.V., (2009) Synthesis of mesoporous silica particles with controlled pore structure, Ceramics Int. (35), 3347–3353.
[11] Pajonk, G.M. (2003) Some applications of silica aerogels, Colloid Polymer Science (281), 637–651.
[12] Tillotson, T.M., Reynolds, J.G. (2003) Structure and characterization of sol-gel and aerogel materials and oxidation products from the reaction of (CH3O)4Si and C16H33Si(OCH3)3, Journal of Non-Crystalline Solids (331), 168-176.
[13] Kortesuo, P., Ahola, M., Kangas, M., Yli-Urpo, A., Kiesvaara, J., Marvola, M. (2001) In vitro release of dexmedetomidine from silica xerogel monoliths: effect of sol-gel synthesis parameters, International Journal of pharmaceutics (221), 107-114. [14] Luckarift, H.R., Spain, J.C., Naik, R.R., Stone, M.O. (2004) Enzyme immobilization in a biomimetic silica support, Nature Biotechnology (22), 211–213.
[15] Iller, R.K. (1979) The Chemistry of Silica, Wiley-Interscience, NewYork.
[16] Sakai, N., Nakano, T., Yanaba, K., Imazeki, S. (2018) Studies of the characteristic and reaction mechanism of silica xerogel by sol–gel method catalyzed by alkylbiguanide as a strong organic base. Journal of Sol-Gel Science and Technology 88 (2), 379-385.
[17] de Miranda, L.A., Mohallem, N.D., de Magalhães, W.F. (2006) Morphological and textural characterization of functionalized particulate silica xerogels. Applied surface science 252 (10), 3466-3474.
[18] Brunauer, S., Deming, L.S., Deming, W.E., Teller, E. (1940) On a theory of the van der Waals adsorption of gases, Journal of American Chemical Society (62), 1723.
[19] Barrett, E.P., Joyner, L.G., Halenda, P.P. (1951) The determination of pore volume and area distributions in porous substances. I. Computations from nitrogen isotherms, Journal of American Chemical Society (73), 373–380.
[20] S.J. Gregg, K.S.W. Sing, (1982) Adsorption, Surface Area and Porosity, Academic Press Inc., San Diego.

Sigma Mühendislik ve Fen Bilimleri Dergisi-Cover

ISSN: 1304-7191
Yayın Aralığı: Yılda 4 Sayı
Yayıncı: Yıldız Teknik Üniversitesi

Arşiv