DESIGN OF A HIGH EFFICIENCY POWER AMPLIFIER FOR WIRELESS AND RADAR APPLICATIONS

This article reports a 46% efficient Class-A power amplifier (PA) designed for wireless transceiver communication systems. The compensation elements with a series capacitor and a shunt inductor are used to compensate for the internal parasitic components of the packaged transistor. The peak PA efficiency of 46% with a power gain of 18 dBm is achieved at an input power of 0dBm for a continuous wave designed for 1850-1950 MHz. To improve output power and efficiency by suppressing harmonic powers, an output matching circuit using the transmission lines is used. The power amplifier exhibits a 0Bm, 18-dB power gain while using a low quiescent current of 56 mA. The simulation results of the designed PA are found to be useful for many commercial wireless and radar applications, since it is compact in size, low loss, and cost with good performance. The PA can be scaled to the commercial frequencies up to 2.5GHz, offering advantages for most ISM and cellular band applications. This work demonstrates the feasibility of using class-A PAs for short-range, low-power applications.

___

  • [1] S. Gao, High-efficiency class-F RF/Microwave power amplifiers, IEEE Microwave Magazine, vol. 7, no. 1, Feb. 2006, pp. 40-48
  • [2] S. Gao, P. Butterworth, S. Ooi, and A. Sambell, High efficiency class-F power amplifier design including input harmonic termination, IEEE Microwave and Wireless Components Letters, vol. 16, no. 2, Feb. 2006, pp. 81-83
  • [3] A Highly Efficient Class-F Power Amplifier for Wideband Linear Power Amplifier Applications Jangheon Kim,1 Junghwan Moon,1 Sungchul Hong,2 and Bumman Kim1 microwave and optical technology letters / vol. 51, No. 10, October 2009.
  • [4] “A SiGe BiCMOS Class A Power Amplifier Targeting 5.5GHz Application” Yan Qiong, Hua Lin, Chen Lei, Ruan Ying, Su Jie, Zhang Shulin, Zhang we., Liu Shengfu and Lai Zongsheng 978-1-4577-1610-2/11/$26.00 ©2011 IEEE.
  • [5] K. Nellis and P. Zampardi, A comparison of bipolar technologies for linear handset power amplifier applications, in Proc. BCTM, 2003. pp. 203-209.
  • [6] S. Cripps, RF Power Amplifiers for Wireless Communications, Norwood, MA, Artech House, 1999.
  • [7] A New Circuit Model for Designing Fully Integrated Class-A Power Amplifier, Xiaokang Guan, Haigang Feng, Albert Wang, Liwu Yang, PROC. 25th INTERNATIONAL CONFERENCE ON MICROELECTRONICS (MIEL 2006), BELGRADE, SERBIA AND MONTENEGRO, 14-17 MAY, 2006.
  • [8] http://pdf.datasheetcatalog.com/datasheet/infineon/1-bfp650_preliminary.pdf