Yasemin KILIÇ, Esin GÜNAY, Müzeyyen MARŞOĞLU

8556

Investigation of environmental compliance performance of coloured concretes produced from waste red mud

Investigation of environmental compliance performance of coloured concretes produced from waste red mud

Red mud is a waste generated by the Bayer process and its disposal is a major problem. Waste red mud from Eti Seydişehir Aluminium Plant of Turkey was considered as a hazardous waste for the environment and human health. The storage of the red mud is difficult due to its high amount of various metal oxides, elements and caustic content. In this study, the environmental compliance tests were done and evaluated according to the “Regulation on Regularly Storage of Waste” of the produced city furnitures with red mud. According to the test results; red mud, a hazardous waste alone, can be used in the city furniture production. The city furnitures produced with red mud does not contain hazardous substances. Also, these city furnitures can be stored as safe substances with “Regulation on Regularly Storage of Waste in Turkey”. City furnitures produced with red mud preserving colouring properties at +40ºC/-10ºC for 1 year period.
Keywords:

Concrete, environmental compliance test red mud, life performance test, pigment.,

PDF

___

  • The article references can be accessed from the .pdf file.
Sigma Journal of Engineering and Natural Sciences-Cover
  • ISSN: 1304-7191
  • Başlangıç: 1983
  • Yayıncı: Yıldız Teknik Üniversitesi
Arşiv
Sayıdaki Diğer Makaleler

Investigation of environmental compliance performance of coloured concretes produced from waste red mud

Yasemin KILIÇ, Esin GÜNAY, Müzeyyen MARŞOĞLU

Experimental investigation of cutting forces in orthogonal cutting using rounded edge worn tool

Alper UYSAL, Erhan ALTAN

Treatment of domestic wastewaters by two different pilot scale treatment processes

Neslihan MANAV DEMİR, Asuman YILDIRIM, Çiğdem BALÇIK, Tamer COŞKUN, Eyüp DEBİK

Traditional and alternative technologies for arsenic removal from drinking waters

Merve DÖNMEZ ÖZTEL, Feryal AKBAL

Geometrically nonlinear analysis of laminated composite mindlin plate with mixed finite element method

Akif KUTLU, Mehmet H. OMURTAG

Measurement methods of wear between piston ring and cylinder liner

Şengül Ar ARI, Zeynep PARLAR

Characterization of functionally graded TiCN and TiBCN coating of cutting tools

Cem ERTEK, Ayşegül AKDOĞAN EKER

Improvement of adobe material by using glass-fiber and entrained air

Fahriye MAZLUM KILINÇKALE, Tuna GÜL

Evaluation of the effect of Marmara Sea on the characterization of the coastal line atmosphere in İstanbul

Nihan UYGUR, Arslan SARAL

Local scour below submarine pipelines exposed to irregular wave attack

Burak KIZILÖZ, Esin ÖZKAN ÇEVİK