Mehmet Ali BELEN, Peyman MAHOUTI, Filiz GÜNEŞ, Hakan Paşa PARTAL

DESIGN AND IMPLEMENTATION OF DOPPLER MICROWAVE MOTION SENSOR FOR INDOOR APPLICATION

This paper presents a systematic integration and circuits design scheme of ISM-band Doppler radar for short-range applications. The authors designed a complete CW Doppler radar transceiver and made a test for verification. Firstly, we establish a system model by conventional radar equation. Secondly, design the schematics of main modules including an oscillator, a mixer, and antennas. Finally, perform system integration using the designed circuits diagrams and parameters. The performance is found fairly satisfactory by test verification.

Keywords:

Doppler radar, motion sensor, microwave radar, ISM band,

PDF

___

[1] H. Meinel, “Automotive millimeter wave radar: History and present status,” in Proc. 28th Eur. Microwave Conf., Amsterdam, The Netherlands, 1998, pp. 619–629.
[2] P. Heide, “24 GHz short-range microwave sensors for industrial and vehicular applications,” presented at the Short-Range RadarWorkshop, Ilmenau, Germany, July 15–16, 1999.
[3] B. C. Li, J. Cummings, J. Lam, E. Graves, and W. Wu, “Radar Remote Monitoring of Vital Signs,” in February 200 IEEE Microwave Magazine, pp. 47-56.
[4] http://www.maximintegrated.com/en/products/comms/wireless-rf/ MAX2750.html
[5] P. Mahouti, M. A. Belen, H. P. Partal, S. Demirel and F. Güneş, “Miniaturization with Dumbbell Shaped Defected Ground Structure for Power Divider Designs Using Sonnet”. Applied computational electromagnetics society 2015.
[6] A. S. Türk, A. K. Keskin, M. D. Şentürk, “Dielectric Loaded TEM Horn Fed Ridged Horn Antenna Design for Ultra-wide Band Ground Penetrating Impulse Radar”. Turkish Journal of Electrical Engineering & Computer Sciences.DOI: 10.3906/elk-1303-48.
[7] Design and Implementation of Doppler Microwave Motion Sensor for Indoor Application, https://www.youtube.com/watch?v=pvl26qnbYFs& feature=youtu.be, (available 26.05.2018).