HASAN ALİ TANER, TEVFİK AĞAÇAYAK, ALİ ARAS

LEACHING OF ZINC AND MANGANESE FROM SPENT ZINC-CARBON BATTERIES IN ACETIC ACID SOLUTION

Bu çalışmada, asetik asit içerisinde atık çinko-karbon pillerinden Zn ve Mn'nin ekstraksiyonu çalışılmıştır. Farklı koşullar altında Zn ve Mn çözünme davranışlarını araştırmak için liç testleri yapılmıştır. Deneylerde kullanılan parametreler; karıştırma hızı, asetik asit derişimi, sıcaklık ve tane boyutudur. Çinko ve manganın çözünme verimi sırasıyla %83.59 ve %52.47 olarak bulunmuştur. 600 dev/dk karıştırma hızında, 2 M asetik asit derişiminde, -53 µm tane boyutunda, 60°C liç sıcaklığında ve 240 dakikalık liç süresinde en yüksek Zn ve Mn çözünme verimi elde edilmiştir.

Asetik Asit Çözeltisinde Atık Çinko-Karbon Pillerinden Mangan ve Çinkonun Liçi

In this study, extraction of Zn and Mn from spent zinc-carbon batteries in acetic acid solution was studied. Leaching tests were carried out to evaluate the leaching behaviour of Zn and Mn under different conditions. Experimental parameters used were; stirring speed, acetic acid concentration, temperature and particle size. The zinc and manganese extraction were obtained as 83.59% and 52.47%, respectively. The maximum Zn and Mn extraction were obtained in 240 min of leaching time with the following conditions; 600 rpm stirring speed, 2.0 M acetic acid concentration, -53 µm particle size and 60°C leaching temperature.

PDF

___

Baba, A.A., Adekola, A.F., Bale, R.B., 2009, "Development of a combined pyro- and hydro-metallurgical route to treat spent zinc-carbon batteries", Journal of Hazardous Mat., Vol. 171, pp. 838-844.
Bartolozzi, M., 1990, "The recovery of metals from spent alkaline-manganese batteries: a review of patent literature", Resources, Conservation and Recycling, Vol. 4, pp. 233-240.
Bernardes, A.M., Espinosa, D.C.R., Tenorio, J.A.S., 2004, "Recycling of batteries: a review of current processes and technologies", Journal of Power Sources, Vol. 130, pp. 291-298.
Buzatu, M., Saceanu, S., Petrescu, M.I., Ghica, G.V., Buzatu, T., 2014, "Recovery of zinc and manganese from spent batteries by reductive leaching in acidic media", Journal of Power Sources, Vol. 247, pp. 612-617.
EBRA, 2012, "European Battery Recycling Association", http://www.ebrarecycling.org, visit date: May 10, 2016.
EPBA, 2013, www.epbaeurope.net (European Portable Battery Association), visit date: May 10, 2016.
Ferella, F., De Michelis, I., Veglio, F., 2008, "Process for the recycling of alkaline and zinc-carbon spent batteries", Journal of Power Sources, Vol. 183, pp. 805-811.
Gega, J., Walkowiak, W., 2011, "Leaching of zinc and manganese from used up zinc-carbon batteries using aqueous sulfuric acid solutions", Physicochem. Probl. Miner. Process., Vol. 46, pp.155- 162.
Kierkegaard, S., 2007, "EU battery directive, charging up the batteries: squeezing more capacity and power into the new EU battery directive", Computer Law & Security Report, Vol. 23, pp. 357- 364.
Kursunoglu, S., Kaya, M., 2014, "Dissolution and precipitation of zinc and manganese obtained from spent zinc-carbon and alkaline battery powder", Physicochem. Prob. Miner. Process., Vol. 50(1), pp. 41-55.
Park, J.T., Kang, J.G., Sohn, J.S., Yang, D.H., Shin, S.M., 2006, "Physical treatment for recycling commercialization of spent household batteries", J. Korean Inst. Resour. Recycl., Vol. 15 (6), pp. 48-55.
Rayovac, C., 1999, "Material safety data sheet", Available from http://rayovac.com.
Sayilgan, E., 2010, "Acidic leaching and precipitation of zinc and manganese from spent battery powders using various reluctants", Journal of Hazardous Materials, Vol. 173, pp. 137-143.
Shin, M. S., Senanayake, G., Sohn, J., Kang, J., Yang, D., Kim, T., 2009, "Separation of zinc from spent zinc-carbon batteries by selective leaching with sodium hydroxide", Hydrometallurgy, Vol. 96, pp. 349-353.