Translüsensi Özelliğinin Polisaj Uygulanan Kompozit Rezinlerde Cielab ve Ciede Renk Sistemlerine Göre Karşılaştırılması

Amaç: Bu in vitro çalışmanın amacı, iki farklı polisaj sistemi uygulanan üç farklı kompozit rezinin iki farklı renk sistemine göre termal döngü işlemine tabii tutularak translüsensi değerlerini karşılaştırmaktır. Gereç ve Yöntemler: 60 adet disk şeklindeki kompozit materyaller (Tetric N-Ceram, Escom100, Filtek 3M-ESPE Bulk- Fill) üç gruba ayrıldı (n=20) ve her gruptaki örnekler iki polisaj sistemine (Sof-Lex, Optrapol) göre alt gruplara ayrıldı (n=10). Translüsensi değerleri termal döngü önce ve sonrasında (10.000 döngü), CIELAB(L*a*b) ve CIEDE 2000 renk sistemlerine göre ölçümler yapılarak tespit edildi. Elde edilen verileri karşılaştırmak için üç yönlü varyans analizi (ANOVA) ve Bonferroni testinden yararlanıldı. Renk sistemleri arasındaki ilişkinin incelenmesi için Pearson korelasyon analizi kullanıldı. Tüm analizlerde anlamlılık düzeyi p

Comparison of Translucency in Polished Composite Resins According to Cielab and Ciede Color Systems

Background: The purpose of this in vitro study is to compare the translucency values of three different composite resins, which are applied two different polishing systems, by thermal cycling according to two different color systems. Methods: 60 disc-shaped composite materials (Tetric N-Ceram, Escom 100, Filtek 3M-ESPE Bulk-Fill) were divided into three groups (n=20) and samples were subdivided according to two polishing systems (Sof-Lex, Optrapol) (n=10). Translucency values were determined by measuring according to the CIELAB(L*a*b) and CIEDE 2000 color systems before and after the thermal cycle (10,000 cycles). Three-way analysis of variance (ANOVA) and Bonferroni test were used to compare the data obtained. Pearson correlation analysis was used to examine the relationship between color systems. In all analyzes, the significance level was determined as p

PDF

___

1. Baldissera RA, Corrêa MB, Schuch HS, Collares K, Nascimento GG, Jardim PS et al. Are there universal restorative composites for anterior and posterior teeth? J Dent. 2013; 41(11): 1027–35.
2. Kim JJ, Moon HJ, Lim BS, Lee YK, Rhee SH, Yang HC. The effect of nanofiller on the opacity of experimental composites. J Biomed Mater Res B Appl Biomater. 2007; 80(2): 332–8.
3. Salas M, Lucena C, Herrera LJ, Yebra A, Della Bona A, Pérez MM. Translucency thresholds for dental materials. Dent Mater. 2018; 34(8): 1168–74.
4. Li Q, Xu BT, Li R, Wang YN. Spectrophotometric comparison of translucent composites and natural enamel. J Dent. 2010; 38(2): e117–22.
5. Villarroel M, Fahl N, De Sousa AM, De Oliveira, OB. Direct esthetic restorations based on translucency and opacity of composite resins. J Esthet Restor Dent. 2011; 23: 73–87.
6. Burgess J, Cakir D. Comparative properties of low- shrinkage composite resins. Compend Contin Educ Dent. 2010; 31(2); 10–5.
7. De Oliveira DC, De Menezes LR, Gatti A, Correr Sobrinho L, Ferracane JL, Sinhoreti MA. Effect of nanofiller loading on cure efficiency and potential color change of model composites. J Esthet Restor Dent. 2016; 28(3): 171–7.
8. Arimoto A, Nakajima M, Hosaka K, Nishimura K, Ikeda M, Foxton RM, Tagami J. Translucency, opalescence and light transmission characteristics of light-cured resin composites. Dent Mater. 2010; 26(11): 1090–7.
9. Salgado V, Cavalcante LM, Silikas N, Schneider LF. The influence of nanoscale inorganic content over optical and surface properties of model composites. J Dent. 2013; 41: e45–e53.
10.Johnston WM, Reisbick MH. Color and translucency changes during and after curing of esthetic restorative materials. Dent Mater. 1997; 13(2): 89–97.
11.Yu B, Lee YK. Influence of color parameters of resin composites on their translucency. Dent Mater. 2008; 24(9): 1236–1242.
12.Lee YK. Influence of filler on the difference between the transmitted and reflected colors of experimental resin composites. Dent Mater. 2008; 24(9): 1243–47.
13.Ardu S, Braut V, Di Bella E, Lefever D. Influence of background on natural tooth colour coordinates: An in vivo evaluation. Odontology. 2014; 102(2): 267–71.
14.Ardu S, Braut V, Gutemberg D, Krejci I, Dietschi D, Feilzer AJ. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int. 2010; 41(8): 695–702.
15.Luo MR, Cui G, Rigg B. The development of the CIE 2000 colour-difference formula: CIEDE2000. Color Res Appl. 2001; 26(5): 340–50.
16.Westland, S. Review of the CIE system of colorimetry and its use in dentistry. J Esthet Restor Dent. 2003; 15: S5–12.
17.Paravina RD, Kimura M, Powers JM. Evaluation of polymerization-dependent changes in color and 17.Paravina RD, Kimura M, Powers JM. Evaluation of polymerization-dependent changes in color and translucency of resin composites using two formulae. Odontology. 2005; 93(1): 46–51.
18.Ghinea R, Pérez MM, Herrera LJ, Rivas MJ, Yebra A, Paravina RD. Color difference thresholds in dental ceramics. J Dent. 2010; 38(2): e57-64.
19.Sidhu SK, Ikeda T, Omata Y, Fujita M, Sano H. Change of color and translucency by light curing in resin composites. Oper Dent. 2006; 31(5): 598– 603.
20.Ryan EA, Tam LE, McComb D. Comparative translucency of esthetic composite resin restorative materials. J Can Dent Assoc. 2010; 76: a84.
21.Azzopardi N, Moharamzadeh K, Wood DJ, Martin N, van Noort R. Effect of resin matrix composition on the translucency of experimental dental composite resins. Den. Mater. 2009; 25(12): 1564– 8.
22.Thompson JM. Translucency & radiopacity of five resin composites. (Thesis). Michigan; The University of Michigan: 2011.
23.Atay MT, Ahmet O, Özel G. Ağız ortamının simulasyonu açısından termal ve loading siklusun önemi. Atatürk Üniv Diş Hek Fak Derg. 2015; 14: 88–93.
24.Morresi AL, D'Amario M, Capogreco M, Gatto R, Marzo G, D'Arcangelo C, Monaco A. Thermal cycling for restorative materials: Does a standardized protocol exist in laboratory testing? A literature review. Journal of the Mechanical Behavior of Biomedical Materials. 2014; 29, 295– 308.
25.Johnston WM, Ma T, Kienle BH. Translucency parameter of colorants for maxillofacial prostheses. Int J Prosthodont. 1995; 8(1): 79–86.
26.Sharma G, Wu W, Dalal EN. The CIEDE2000 color- difference formula: Implementation notes, supplementary test data, and mathematical observations. Color Res Appl. 2005; 30(1): 21–30.
27.Yu B, Lee YK. Translucency of varied brand and shade of resin composites. Am. J. Dent. 2008; 21(4): 229–32.
28.Mitra SB, Wu D, Holmes BN. An application of nanotechnology in advanced dental materials. J Am Dent Assoc. 2003, 134(10): 1382–90.
29.Frauscher KE, Ilie N. Depth of cure and mechanical properties of nano-hybrid resin-based composites with novel and conventional matrix formulation. Clin Oral Investig. 2012; 16(5): 1425–34.
30.Gül P, Akgül N. Farklı kompozit rezinlerin transküsensi ve maskeleme özelliklerinin karşılaştırılması. Atatürk Üniv Diş Hek Fak Derg. 2013; 21(1): 30-6.
31.Turgut S, Bağış B, Bağış YH, Korkmaz FM. Restoratif Materyallerin Translüsensi özelliklerinin Değerlendirilmesi. AÜ Diş Hek Fak Derg. 2011; 38(1): 15-21.
32.Piccoli YB, Lima VP, Basso GR, Salgado VE, Lima GS, Moraes RR. Optical stability of high-translucency resin- based composites. Oper Dent. 2019; 44(5): 536–44.
33.Naeimi Akbar H, Moharamzadeh K, Wood DJ, Van Noort R. Relationship between color and Translucency of Multishaded Dental Composite Resins. Int J Dent. 2012; 2012. 708032.
34.Bouschlicher MR, Cobb DS, Boyer DB. Radiopacity of compomers, flowable and conventional resin composites for posterior restorations. Oper Dent. 1999; 24(1): 20–5.
35.Mikhail SS, Schricker SR, Azer SS, Brantley WA, Johnston WM. Optical characteristics of contemporary dental composite resin materials. J Dent. 2013; 41(9): 771–8.
36.Schmeling M, DE Andrada MA, Maia HP, DE Araújo EM. Translucency of value resin composites used to replace enamel in stratified composite restoration techniques. J Esthet Restor Dent. 2012; 24(1): 53–8.
37.Salgado VE, Albuquerque PP, Cavalcante LM, Pfeifer CS, Moraes RR, Schneider LF. Influence of photoinitiator system and nanofiller size on the optical properties and cure efficiency of model composites. Dent Mater. 2014; 30(10): e264–71.
38.Cengiz E, Kurtulmuş YS, Ulusoy N. Farklı Kompozit rezinlerin translusensi özelliklerinin karşılaştırılması. EÜ Dişhek Fak Derg. 2015; 36(3): 128–31.
39.Barclay CW, Boyle EL, Williams R, Marquis PM. The effect of thermocycling on five adhesive luting cements. J Oral Rehabil. 2002; 29(6): 546–52.
40.Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent. 1999; 27(2): 89–99.
41.Xie C, Han Y, Zhao XY, Wang ZY, He HM. Microtensile bond strength of one-and two-step self-etching adhesives on sclerotic dentin: The effects of thermocycling. Oper Dent. 2010; 35(5): 547–55.
42.Bektas ÖÖ, Eren D, Siso SH, Akin, GE. Effect of thermocycling on the bond strength of composite resin to bur and laser treated composite resin. Lasers Med Sci. 2012; 27(4): 723–8.
43.Lu H, Powers JM. Color stability of resin cements after accelerated aging. Am J Dent. 2004; 17(5): 354–8.
44.Heintze SD, Forjanic M, Rousson V. Surface roughness and gloss of dental materials as a function of force and polishing time in vitro. Dent Mater. 2006; 22(2): 146–65.
45.Chung, K. Effects of finishing and polishing procedures on the surface texture of resin composites. Dent Mater. 1994; 10(5): 325–30.
46.Lee YK, Lim BS, Kim CW. Effect of surface conditions on the color of dental resin composites. J Biomed Mater Res. 2002; 63, (5): 657–63.
47.ElSayad II. Color and translucency of finished and unfinished esthetic restorative materials after staining and bleaching. Saudi Dent J. 2018; 30(3): 219–25.
48.Doğan A, Yuzugullu B. Renk seçiminde güncel teknolojik gelişmeler. Atatürk Üniv Diş Hek Fak Derg. 2011; 2011(4); 57-64.
49.Genç G, Toz T. Ön dişlerin direkt restorasyonlarında uygulanan kompozit rezinlerin renk stabiliteleri. The Journal of Ondokuz Mayis University Faculty of Dentistry. 2014; 14(2); 7-19.
50.Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, Linninger M, Sakai M, Takahashi H, Tashkandi E, Perez MM. Color Difference Thresholds in dentistry. J Esthet Restor Dent. 2015;1; S1–S9.
51.Paravina RD, Kimura M, Powers JM. Evaluation of polymerization-dependent changes in color and translucency of resin composites using two formulae. Odontology 2005; 93(1): 46–51.
52.Gregor L, Krejci I, Di Bella E, Feilzer AJ, Ardu S. Silorane, ormocer, methacrylate and compomer long-term staining susceptibility using ΔE and ΔE 00 colour-difference formulas. Odontology. 2016; 104(3): 305–9.
53.Nikaido T, Kunzelmann KH, Chen H, Ogata M, Harada N, Yamaguchi S, Cox CF, Hickel R, Tagami J. Evaluation of thermal cycling and mechanical loading on bond strength of a self- etching primer system to dentin. Dent Mater. 2002; 18(3): 269–75.
54.Koyuturk AE, Kusgoz A, Ulker M, Yesilyurt C. Effects of mechanical and thermal aging on microleakage of different fissure sealants. Dent Mater J. 2008; 27(6): 795–801.
55.Khoroushi M, Mansoori M. Marginal sealing durability of two contemporary self-etch sdhesives. ISRN Dent. 2012; 2012: 1–8.