KAYA YÜZEY PÜRÜZLÜLÜĞÜNÜN SCHMİDT SERTLİĞİ ÖLÇÜMLERİNE ETKİSİ
Schmidt çekici ile sertlik tayini maden, jeoloji ve inşaat mühendislerince uygulanan disiplinler
arası bir deney yöntemidir. Yüzey pürüzlülüğü Schmidt sertliğini etkileyen önemli bir parametredir.
Bu çalışmada doğal, taşlama yapılmış ve kesilmiş yüzeylerin olduğu blok numunelerde ve karot
örneklerde ölçümler yapılmış ve sonuçları karşılaştırılmıştır. Ayrıca her yüzeyin pürüzlülük
özellikleri belirlenmiş ve sertlik değerleri ile ilişkisi araştırılmıştır. En yüksek sertlik değeri ve
en düşük standart sapma kesilmiş yüzeylerde, en düşük sertlik değeri ve en yüksek standart
sapma ise doğal yüzeylerden elde edilmiştir. Bu çalışmada, yüzey pürüzlülüğü azaldıkça sertlik
değerlerinin arttığı ve standart sapma değerlerinin azaldığı görülmüştür. Sonuç olarak, Schmidt
çekicinin uygulanacağı yüzeyin pürüzlülüğü giderilmeli ve standart sapmanın yüksek olması
durumunda test yüzeyi gözden geçirilmelidir.
___
- ASTM., 2001. Standard Test Method for Determination
of Rock Hardness by Rebound Hammer Method. 04.09,
D 5873-00.
- Aydın, A., 2009. ISRM Suggested Method for
Determination of the Schmidt Hammer Rebound
Hardness: Revised Version. International Journal of
Rock Mechanics and Mining Sciences, 46:627–634.
- Aydın, A., Basu, A., 2005. The Schmidt Hammer in Rock
Material Characterization. Engineering Geology, 81:1–14.
- Barton, N., Choubey, V., 1977. The Shear Strength of
Rock Joints in Theory and Practice, Rock Mechanics,
10, 1-2, 1-54.
- Bilgin, N., Seyrek, T., Shahriar, K., 1990. Roadheaders
Glean Valuable Tips for Istanbul Metro Tunnels.
Tunnelling, Oct. 29–32.
- Büyüksağış, I.S., Göktan, R.M., 2007. The Effect of
Schmidt Hammer Type on Uniaxial Compressive
Strength Prediction of Rock. International Journal of
Rock Mechanics and Mining Sciences, 44:299–307.
- Cerna, B., Engel, Z., 2011. Surface and Sub-Surface
Schmidt Hammer Rebound Value Variation for A Granite
Outcrop, Earth Surf. Process. Landforms 36, 170–179.
- Dabski, M., 2009. Early Stages of Weathering of
Glacially-Abraded Limestone Surfaces as Determined
by Various Schmidt Hammer Tests: Biferten glacier
forefield, Glarner Alps (Switzerland), Landform Analysis,
11, 11–15.
- Dabski, M., 2014. Rock Surface Micro−Roughness,
Schmidt Hammer Rebound and Weathering Rind
Thickness Within LIA Skálafellsjökull Foreland, SE
Iceland, Pol. Polar Res. 35, 1, 99–114.
- Deere, D.U., Miller, R.P., 1966. Engineering Classifications
and İndex Properties of İntact rock. Technical report no.
AFWL-TR 65-116, University of Illinois: p 300.
- Demirdağ, S., Yavuz, H., Altındağ, R., 2009. the Effect
of Sample Size on Schmidt Rebound Hardness Value
of Rocks. International Journal of Rock Mechanics and
Mining Sciences, 46:725–730.
- Goudie, A.S., 2006. The Schmidt Hammer in
Geomorphological Research. Progr. Phys. Geogr. 30, 6,
703–718 .
- Göktan, R.M., Ayday, C.A., 1993. Suggested
İmprovement to the Schmidt Rebound Hardness Isrm
Suggested Method With Particular Reference to Rock
Machineability. Int J Rock Mech Min Sci 30:321–322.
- Gökçeoğlu, C., Aksoy, H., 2000. New Approaches to the
Characterization of Clay-Bearing, Densely Jointed and
weak rock masses. Engineering Geology, 58, 1–23.
- Haramy, K.Y., De Marco, M.J., 1985. Use of Schmidt
Hammer for Rock and Coal Testing. In: Proceedings
26Th Us Symposium Rock Mechanics, 26–28 June,
Rapid City, SD. Rotterdam: Balkema p 549–555.
- Hsiung, S.M., Ghosh, A., Chowdhury, A.H., 1995. On
Natural Rock Joint Profile Characterization Using Self-
Affine Fractal Approach, the 35th U.S. Symposium on
Rock Mechanics (USRMS), 5-7 June, Reno, Nevada,
681-687.
- Hucka, V., 1965. A Rapid Method for Determining the
Strength of Rocks in Situ. International Journal of Rock
Mechanics and Mining Sciences, 2:127–134.
- ISRM., 1981. ISRM Suggested Methods Rock
Characterization, Testing and Monitoring. E. T. Brown
(ed.), Pergamon Press, London, 211 s.
- ISRM., 2007. The Complete ISRM Suggested Methods
for rock Characterization, Testing and Monitoring: 1974–
2006. In: Ulusay, Hudson (Eds.), Suggested Methods
Prepared by the Commission on Testing Methods,
International Society for Rock Mechanics. ISRM Turkish
National Group, Ankara, Turkey p 628.
- Kahraman, S., 2001. Evaluation of Simple Methods for
Assessing the Uniaxial Compressive Strength of rock.
International Journal of Rock Mechanics and Mining
Sciences, 38, 981–94.
- Kahraman, S., Fener, M., Gunaydın, O., 2002. Predicting
the Schmidt Hammer Values of in–Situ Intact Rock From
Core Sample Values. International Journal of Rock
Mechanics & Mining Sciences, 39, 395–399.
- Karaman, K., Kesimal, A., 2015a. A Comparative Study
of Schmidt Hammer Test Methods for Estimating the
Uniaxial Compressive Strength of Rocks. Bulletin of
Engineering Geology and the Environment, 74, 507-520.
- Karaman K., Kesimal A., 2015b. Correlation of Schmidt
Rebound Hardness With Uniaxial Compressive Strength
and P-Wave Velocity of Rock Materials. Arabian Journal
for Science and Engineering, 40, 1897-1906.
- Karpuz, C., 1990. A classification System for Excavation
of Surface Coal Measures. Mining Science and
Technology, 11:157–163.
- Karpuz, C., Paşamehmetoğlu, A.G., 1977. Field
Characterization of Weathered Ankara Andezites.
Engineering Geology, 46:1–17.
- Katz, O., Reches, Z., Roegiers, J.C., 2000. Evaluation of
Mechanical Rock Properties Using a Schmidt Hammer.
International Journal of Rock Mechanics and Mining
Sciences, 37:723–728.
- Li, Y., Huang, R., 2015. Relationship Between Joint
Roughness Coefficient and Fractal Dimension of
Rock Fracture Surfaces. International Journal of Rock
Mechanics and Mining Sciences, 75, 15–22.
- McCarroll, D., 1989. Potential and Limitations of the
Schmidt Hammer for Relative-Age Dating: Field Tests on
Neoglacial Moraines, Jotunheimen, Southern Norway,
Arctic and Alpine Research, 21,3, 268-275.
- Poole, R.W., Farmer, I.W., 1978. Geotechnical Factors
Affecting Tunneling Machine Performance in Coal
Measures Rock. Tunnels tunnelling Dec. 27–30.
- Poole, R.W., Farmer, I.W., 1980. Consistency and
Repeatability of Schmidt Hammer Rebound Data During
Field Testing. International Journal of Rock Mechanics
and Mining Sciences, Geomech Abstr. 17:167–171.
- Schmidt, E., 1951. a Non-Destructive Concrete Tester.
Concrete, 59(8):34–35.
- Soiltest, Inc., 1976. Operating İnstructions—Concrete
Test Hammer. Soiltest Inc, Evanston
- Sumner, P., Nel, W., 2002. The Effect of Rock Moisture
on Schmidt Hammer Rebound: Tests on Rock Samples
From Marion Island and South Africa. Earth Surf Process
Landf 27:1137–1142.
- USBR., 1998. Engineering Geology Field Manual. Field
I˙ndex Tests, 1:111–112.
- Williams, R.B.G., Robinson, D.A., 1983. The Effect of
Surface Texture on the Determination of the Surface
Hardness of Rock Using Schmidt Hammer. Earth
Surface Processes and Landforms 8, 289-292.
- Yağız, S., 2009. Predicting Uniaxial Compressive
Strength, Modulus of Elasticity and Index Properties
of Rocks Using the Schmidt hammer. Bulletin of
Engineering Geology and the Environment, 68:55–63.