___

• [1] Zarco-Periñán, P.J.; Zarco-Soto, F.J.; Zarco-Soto, I.M.; Martínez-Ramos, J.L.; Sánchez-Durán, R. CO2 Emissions in Buildings: A Synopsis of Current Studies. Energies 2022, 15, 6635.
• [2] Ness, D.A.; Xing, K. Toward a Resource-Efficient Built Environment: A Literature Review and Conceptual Model. J. Ind. Ecol. 2017, 21, 572–592.
• [3] Ayodele Emmanuel Ikudayisi, Albert P.C. Chan, Amos Darko, Yomi M.D. Adedeji, Integrated practices in the Architecture, Engineering, and Construction industry: Current scope and pathway towards Industry 5.0, Journal of Building Engineering, Volume 73, 2023, 106788, ISSN 2352-7102, https://doi.org/10.1016/j.jobe.2023.106788
• [4] Hossein Omrany, Amirhosein Ghaffarianhoseini, Ruidong Chang, Ali Ghaffarianhoseini, Farzad Pour Rahimian, Applications of Building information modelling in the early design stage of high-rise buildings, Automation in Construction, Volume 152, 2023, 104934, ISSN 0926-5805, https://doi.org/10.1016/j.autcon.2023.104934
• [5] Mohamadmahdi Aziminezhad, Roohollah Taherkhani, BIM for deconstruction: A review and bibliometric analysis, Journal of Building Engineering, Volume 73, 2023, 106683, ISSN 2352-7102, https://doi.org/10.1016/j.jobe.2023.106683.
• [6] S.O. Ajayi, L.O. Oyedele, O.O. Akinadé, M. Bilal, H.A. Owolabi, H.A. Alaka, Ineffectiveness of construction waste management strategies: knowledge gap analysis, in: Smart, Sustainable and Healthy City, Proceeding of the First International Conference of the CIB Middle East and North Africa Research Network, CIB-MENAAt, Abu Dhabi, UAE, 2014, https://doi.org/10.13140/RG.2.1.4788.8480
• [7] A. Ghaffarianhoseini, J. Tookey, A. Ghaffarianhoseini, N. Naismith, S. Azhar, O. Efimova, K. Raahemifar, Building information modelling (BIM) uptake: clear benefits, understanding its implementation, risks and challenges, Renew. Sust. Energ. Rev. 75 (2017) 1046–1053, https://doi.org/10.1016/j.rser.2016.11.083.
• [8] Karagöz, M., E. (2019). Building Approximate Cost Calculation Proposal with Bim. Journal of Building Information Modeling, Issue: 1 S. 39-45.
• [9] Eastman, C., Teicholz, P., Sacks, R., Liston, K. (2011). YBM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors, 2nd Edition.
• [10] Liu, T., Hsieh, T.,(2011), BIM-Based Government Procurement System- The Likely Development In Taiwan, 2011 Proceedings of the 28th ISARC, Seoul, Korea, pg. 758-763.
• [11] C. Eastman, P. Teicholz, R. Sacks, K. Liston, BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors, John Wiley & Sons, 2011. ISBN: 978-0-470-54137-1.
• [12] J.K.W. Wong, J. Zhou, Enhancing environmental sustainability over building life cycles through green BIM: a review, Autom. Constr. 57 (Sep. 2015) 156–165, https://doi.org/10.1016/J.AUTCON.2015.06.003.
• [13] F. Lozano, J.C. Jurado, J.A. Lozano-Galant, A. de la Fuente, J. Turmo, Integration of BIM and Value Model for Sustainability Assessment for application in bridge projects, Automation in Construction, Volume 152, 2023, 104935, ISSN 0926-5805, https://doi.org/10.1016/j.autcon.2023.104935
• [14] K. Casta˜neda, O. S´anchez, R.F. Herrera, E. Pellicer, H. Porras, BIM-based traffic analysis and simulation at road intersection design, Autom. Constr. 131 (Nov. 2021), 103911, https://doi.org/10.1016/J.AUTCON.2021.103911
• [15] L. Obi, B. Awuzie, C. Obi, T.S. Omotayo, A. Oke, O. Osobajo, Bim for deconstruction: an interpretive structural model of factors influencing implementation, Buildings 11 (2021), https://doi.org/10.3390/buildings11060227
• [16] L. Ding, Y. Zhou, B. Akinci, Building information modeling (BIM) application framework: the process of expanding from 3D to computable nD, Autom. Constr. 46 (Oct. 2014) 82–93, https://doi.org/10.1016/J.AUTCON.2014.04.009.
• [17] J. Du, Z. Zou, Y. Shi, D. Zhao, Zero latency: real-time synchronization of BIM data in virtual reality for colworkerative decision-making, Autom. Constr. 85 (Jan. 2018) 51–64, https://doi.org/10.1016/J.AUTCON.2017.10.009
• [18] Wu, X. Wireless management system of prefabricated construction materials based on BIM technology. J Wireless Com Network 2021, 116 (2021). https://doi.org/10.1186/s13638-021-01955-x
• [19] R. Bortolini, C.T. Formoso, D.D. Viana, Site logistics planning and control for engineer-to-order prefabricated building systems using BIM 4D modeling. Autom. Constr. 98, 248–264 (2019)
• [20] 11. X.J. Li, Research on investment risk influence factors of prefabricated building projects. J. Civ. Eng. Manag. 26(7), 599–613 (2020)
• [21] Jour Zhang, Haichang Shen, Wangchao 2022 Application of BIM and Internet of Things Technology in Material Management of Construction Projects, Advances in Materials Science and Engineering,5381252, https://doi.org/10.1155/2022/5381252
• [22] Q. Xie, X. Zhou, J. Wang, X. Gao, and C. Liu, “Matching realworld facilities to building information modeling data using natural language processing,” IEEE Access, vol. 7, no. 99, 1 page, 2019.
• [23] Y. Cao, S. Miraba, S. Rafiei, A. Ghabussi, and H. Assilzadeh, “Economic application of structural health monitoring and internet of things in efficiency of building information modeling,” Smart Structures and Systems, vol. 26, no. November, pp. 559–573, 2020.
• [24] X. Gao, Y. Wu, and Y. Li, “Research on information integration of construction project management based on bim,” IOP Conference Series: Earth and Environmental Science, vol. 267, no. 3, Article ID 032069, 2019.
• [25] [10] B. Hashim, N. Safie, and H. Husairi, “Building information modelling (bim) and the internet-of-things (iot): a systematic mapping study,” IEEE Access, vol. 8, no. 99, 1 page, 2020.
• [26] Q. Tang, Z. Liu, W. Chen et al., The application of BIM in small and medium-sized smart substation—a case study of prefabricated building design. IOP Conf. Ser. Earth Environ. Sci. 186(5), 012054 (2018)
• [27] Y. Teng, K. Li, W. Pan, et al. Reducing building life cycle carbon emissions through prefabrication: evidence from and gaps in empirical studies. Build. Environ. 132, 125–136 (2018)
• [28] Z. Yuan, C. Sun, Y. Wang, Design for manufacture and assembly-oriented parametric design of prefabricated buildings. Autom. Constr. 88, 13–22 (2018)
• [29] I. García-Pereira, C. Portalés, J. Gimeno et al., A collaborative augmented reality annotation tool for the inspection of prefabricated buildings. Multimedia Tools Appl. 79(4), 1–19 (2019)
• [30] Bhaba R. Sarker, Pius J. Egbelu, T. Warren Liao, Junfang Yu, Planning and design models for construction industry: A critical survey, Automation in Construction, Volume 22, 2012, Pages 123-134, ISSN 0926-5805, https://doi.org/10.1016/j.autcon.2011.09.011.
• [31] P. Brucker, A. Drexel, R. Möhring, K. Neumann, E. Resch, Resource-constrained project scheduling: notation, classification, models and methods, European Journal of Operational Research 112 (1) (1999) 3–41.
• [32] W. Herroelen, E. Demeulemeester, B.D. Reyck, A note on the paper “Resourceconstrained project scheduling: Notation, classification, models and methods” by Brucker et al, European Journal of Operational Research 128 (3) (2001) 679–688.
• [33] S. de Treville, R.D. Shapiro, A.-P. Hameri, From supply chain to demand chain: the role of lead time reduction in improving demand chain performance, Journal of Operations Management 21 (6) (2004) 613–627.
• [34] T. Ala-Risku, M. Kärkkäinen, Material delivery problems in construction projects: a possible solution, International Journal of Production Economics 104 (1) (2005) 19–29.
• [35] D. Rebolj, A. Taibaut, N. Cus-Babic, A. Magdic, P. Podbreznik, Development and application of a road product model, Automation in Construction 17 (6) (2011) 719–728.
• [36] S. Christodoulou, S. Ellinas, P. Astani, Entro-based scheduling of resourceconstrained construction projects, Automation in Construction 18 (7) (2009) 919–928.
• [37] A. Mahalingam, R. Kashyap, C. Mahajan, An evaluation of the applicability of 4D CAD on construction projects, Automation in Construction 19 (2) (2010) 148–159.
• [38] U. Isikdag, J. Underwood, Two design patterns for facilitating building information model-based synchronous colworkeration, Automation in Construction 19 (5) (2010) 544–553.
• [39] L.S. Pheng, C.J. Chuan, Just-in-time management of precast concrete components, Journal of Construction Engineering and Management 127 (6) (2001) 494–501.
• [40] D. Wang, K.L. Yung, W.H. Ip, A heuristic genetic algorithm for subcontractor selection in a global manufacturing environment, IEEE Transactions on Systems, Man, and Cybernetics—Part C: Applications and Reviews 31 (2) (2001) 189–198.
• [41] R. Kapuscinski, R.Q. Zhang, P. Carbonneau, R. Moore, B. Reeves, Inventory decisions in Dell's supply chain, Interfaces 34 (3) (2004) 191–205.
• [42] S.W. McCrary, R.R. Smith, R.N. Callahan, Comparative analysis between manufacturing and construction enterprises on the use of formalized quality management systems, Journal of Industrial Technology 22 (3) (2006) 1–8 [Electronic publication].
• [43] H. Missbauer, W. Hauber, Bid calculation for construction projects: regulations and incentives effects of unit price contracts, European Journal of Operational Research 171 (3) (2006) 1005–1019.
• [44] M.I. Marshall, T.L. Marsh, Consumer and investment demand for manufactured housing units, Journal of Housing Economics 16 (1) (2007) 59–71.