Influence of Top Layer Composition on the Photovoltaic Parameters of P3HT:PCBM Organic Solar Cells

Spin and spray deposition techniques have been used sequentially to examine the effect of the composition of top blend layer on the photovoltaic properties of organic solar cells using well-known poly(3-hexylthiophene):[6,6]-Phenyl C61 butyric acid methyl ester (P3HT:PCBM) blend. Devices were prepared by spraying an extra layer of P3HT or PCBM (~15 nm) onto spin coated (1:1) blend film. P3HT-rich top phase slightly perturbs photovoltaic activity whereas PCBM-rich top phase drastically changes the power conversion efficiencies with a marked decrease in fill factors. Carrier mobilities were only marginally affected by the presence of spray coated top layers. However, series resistance of top phase P3HT-rich blends remained the same with respect to spin coated sample whereas top phase PCBM-rich blends exhibit relatively higher series resistances for both annealed and non-annealed samples. Based on the presented results, one might speculate that electron injection to cathode with P3HT is almost as efficient as with PCBM for active layers utilizing P3HT:PCBM blend.

Keywords:

organic photovoltaics, morphology, spray coating, P3HT PCBM,

PDF

___

S. Gunes, H. Neugebauer, and N. S. Sariciftci, "Conjugated polymer-based organic solar cells," Chemical Reviews, vol. 107, pp. 1324-1338, 2007.
S. E. Shaheen, R. Radspinner, N. Peyghambarian, and G. E. Jabbour, "Fabrication of bulk heterojunction plastic solar cells by screen printing," Applied Physics Letters, vol. 79, pp. 2996-2998, 2001.
P. Schilinsky, U. Asawapirom, U. Scherf, M. Biele, and C. J. Brabec, "Influence of the molecular weight of poly(3-hexylthiophene) on the performance of bulk heterojunction solar cells," Chemistry of Materials, vol. 17, pp. 2175-2180, 2005.
R. Green, A. Morfa, A. J. Ferguson, N. Kopidakis, G. Rumbles, and S. E. Shaheen, "Performance of bulk heterojunction photovoltaic devices prepared by airbrush spray deposition," Applied Physics Letters, vol. 92, 033301, 2008.
C. Girotto, D. Moia, B. P. Rand, and P. Heremans, "High-Performance Organic Solar Cells with Spray-Coated Hole-Transport and Active Layers," Advanced Functional Materials, vol. 21, pp. 64-72, 2011.
H. Y. Park, K. Kim, D. Y. Kim, S. K. Choi, S. M. Jo, and S. Y. Jang, "Facile external treatment for efficient nanoscale morphology control of polymer solar cells using a gas-assisted spray method," Journal of Materials Chemistry, vol. 21, pp. 4457-4464, 2011.
G. Susanna, L. Salamandra, T. M. Brown, A. Di Carlo, F. Brunetti, and A. Reale, "Airbrush spray-coating of polymer bulk-heterojunction solar cells," Solar Energy Materials and Solar Cells, vol. 95, pp. 1775-1778, 2011.
K. X. Steirer, M. O. Reese, B. L. Rupert, N. Kopidakis, D. C. Olson, R. T. Collins, et al., "Ultrasonic spray deposition for production of organic solar cells," Solar Energy Materials and Solar Cells, vol. 93, pp. 447-453, 2009.
S. F. Tedde, J. Kern, T. Sterzl, J. Furst, P. Lugli, and O. Hayden, "Fully Spray Coated Organic Photodiodes," Nano Letters, vol. 9, pp. 980-983, 2009.
J. Weickert, H. Y. Sun, C. Palumbiny, H. C. Hesse, and L. Schmidt-Mende, "Spray-deposited PEDOT:PSS for inverted organic solar cells," Solar Energy Materials and Solar Cells, vol. 94, pp. 2371-2374, 2010.
A. Pivrikas, H. Neugebauer, and N. S. Sariciftci, "Influence of processing additives to nano-morphology and efficiency of bulk-heterojunction solar cells: A comparative review," Solar Energy, vol. 85, pp. 1226-1237, 2011.
C. N. Hoth, R. Steim, P. Schilinsky, S. A. Choulis, S. F. Tedde, O. Hayden, et al., "Topographical and morphological aspects of spray coated organic photovoltaics," Organic Electronics, vol. 10, pp. 587-593, 2009.
P. E. Shaw, A. Ruseckas, and I. D. W. Samuel, "Exciton diffusion measurements in poly(3-hexylthiophene)," Advanced Materials, vol. 20, pp. 3516-3520, 2008.
M. E. Kose, P. Graf, N. Kopidakis, S. E. Shaheen, K. Kim, and G. Rumbles, "Exciton Migration in Conjugated Dendrimers: A Joint Experimental and Theoretical Study," ChemPhysChem, vol. 10, pp. 3285-3294, 2009.
S. Cook, L. Y. Han, A. Furube, and R. Katoh, "Singlet Annihilation in Films of Regioregular Poly(3-hexylthiophene): Estimates for Singlet Diffusion Lengths and the Correlation between Singlet Annihilation Rates and Spectral Relaxation," Journal of Physical Chemistry C, vol. 114, pp. 10962-10968, 2010.
D. S. Qin, P. Gu, R. S. Dhar, S. G. Razavipour, and D. Y. Ban, "Measuring the exciton diffusion length of C-60 in organic planar heterojunction solar cells," Physica Status Solidi a-Applications and Materials Science, vol. 208, pp. 1967-1971, 2011.
B. Romero, G. del Pozo, and B. Arredondo, "Exact analytical solution of a two diode circuit model for organic solar cells showing S-shape using Lambert W-functions," Solar Energy, vol. 86, pp. 3026-3029, 2012.
M. Glatthaar, M. Riede, N. Keegan, K. Sylvester-Hvid, B. Zimmermann, M. Niggemann, et al., "Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy," Solar Energy Materials and Solar Cells, vol. 91, pp. 390-393, 2007.
Z. H. Lin, J. Bjorgaard, A. G. Yavuz, A. Iyer, and M. E. Kose, "Synthesis, photophysics, and photovoltaic properties of low-band gap conjugated polymers based on thieno 3,4-c pyrrole-4,6-dione: a combined experimental and computational study," Rsc Advances, vol. 2, pp. 642-651, 2012.
C. Goh, R. J. Kline, M. D. McGehee, E. N. Kadnikova, and J. M. J. Frechet, "Molecular-weight-dependent mobilities in regioregular poly(3-hexyl-thiophene) diodes," Applied Physics Letters, vol. 86, 122110, 2005.
S. A. Choulis, Y. Kim, J. Nelson, D. D. C. Bradley, M. Giles, M. Shkunov, et al., "High ambipolar and balanced carrier mobility in regioregular poly(3-hexylthiophene)," Applied Physics Letters, vol. 85, pp. 3890-3892, 2004.
D. Chen, F. Liu, C. Wang, A. Nakahara, and T. P. Russell, "Bulk Heterojunction Photovoltaic Active Layers via Bilayer Interdiffusion," Nano Letters, vol. 11, pp. 2071-2078, 2011.
I. G. Hill, A. Rajagopal, A. Kahn, and Y. Hu, "Molecular level alignment at organic semiconductor-metal interfaces," Applied Physics Letters, vol. 73, pp. 662-664, 1998.
N. Koch, S. Duhm, J. P. Rabe, S. Rentenberger, R. L. Johnson, J. Klankermayer, et al., "Tuning the hole injection barrier height at organic/metal interfaces with (sub-) monolayers of electron acceptor molecules," Applied Physics Letters, vol. 87, 101905, 2005.