___

• [1] A. Duru. “Numerical modelling of Contracted sharp crested weirs’’, . Yüksek Lisans Tezi, ODTÜ The Graduate School of Natural and Applied Sciences, Ankara, 2014.[2] S. Haun, N. Reidar, B. Olsen and R. Feurich, “Numerical modeling of Flow over trapezoidal Broad Crested Weir”, Engineering Applications of Computational Fluid mechanics, Vol. 5, No. 3, pp. 397-405, 2011.[3] K. Subramanya, Flow in open channel. Tata McGraw-Hill, 7 West Patel Nagar, New Delhi, 547pp, 2009.[4] M. İlkentapar, “Açık kanallarda geniş başlıklı savaklar üzerinden akımın deneysel ve sayısal modellenmesi”, Yüksek Lisans Tezi, EÜ Fen Bilimleri Enstitüsü, İnşaat Mühendisliği Anabilim Dalı, Kayseri, 2015. [5] H. Chanson, J.S. Montes, “Overflow Characteristics of Circular Weirs: Effect of Inflow Conditions”, Jl of Irrigation and Drainage Engrg, ASCE, Vol. 124, No. 3, pp. 152-162 (ISSN 0733-9437), 1998.[6] N.G. Soydan, M. S. Aköz, O. Şimşek ve V. Gümüş, “Trapez Kesitli Geniş Başlıklı Savak Akımının k- Tabanlı Türbülans Modelleri ile Sayısal Modellenmesi”, Çukurova University Journal of the Faculty of Engineering and Architecture, 27(2), pp. 47-58, 2012.[7] M. Hamad. “Investigation of flow characteristices through box shape culvet combined with broad crested weir’’, MSc thesis, University of Gaziantep, The Graduate School of Natural and Applied sciences, Gaziantep, 2013.[8] Anonim, The open source CFD toolbox. https://www.openfoam.com.05.04.2018[9] M. Cable, “An Evaluation of turbulence models for the numerical study of forced and natural convective flow in atria”, Yüksek Lisans Tezi, Department of Mechanical and Materials Engineering, Canada, 2009.[10] T.T. Shih, W.W. Liou, A. Sahbbir, Z. Yang, J. J. Zhu, “A new k-ε eddy viscosity model for high reynolds number turbulent flows-model development and validation”, Institute for Computational Mechanics in Propulsion and Center for Modeling of Turbulence and Transition Lewis Research Center, Cleveland, Ohio,24(3), 227, 1995. [11] H. Bal, “Geniş başlıklı savak içeren açık kanal akımın sayısal modellenmesi”, Yüksek Lisans Tezi, ÇÜ Fen Bilimleri Enstitüsü, İnşaat Mühendisliği Anabilim Dalı, Adana, 2011.