Hareketli ve sabit cisimler için ağ yama yöntemi
Bu çalışmada hareketli nesneler etrafında birbiri ile örtüşen çözüm ağlarını içeren problemler için az çaba ile üretilebilen ve yaygın olabilecek bir yöntem önerilmiş ve uygulanmıştır. Örtüşen çözüm ağ blokları dikiş atma yöntemi kullanılarak, ağ hücre büyüklerini dikkate almak suretiyle yumuşak yama bandı oluşturularak birleştirilmiştir. Çözüm değerlerini aktarırken interpolasyon yapmaya ihtiyaç duyulmamaktadır. Bu sebeple, mevcut yöntem benzer chimera yöntemine göreceli bir avantaj sağlamaktadır. Yunuslama hareketi yapan bir kanat profile etrafındaki akış, bu yöntemi göstermek için kullanılmıştır. Diğer test problemleri ise bu çalışmaya özel olarak deneme amacıyla oluşturulmuş birbirine göre hareket eden çoklu kanat profile ile uçaktan ayrılan bir nesneye benzetim yapmaktadır.
Mesh stitching method for moving and stationary bodies
An efficient and versatile mesh method is suggested and implemented for problems involving individualoverlapping mesh blocks around moving objects. The overlapped mesh blocks are combined using astitching stripe, which considers smooth transition of the mesh element size between the blocks.Interpolation of the flow values between the mesh blocks is not needed. This is considered as a relativeadvantage of this method compared to the overset mesh method. Unsteady flow around an oscillating bodytest case is used to demonstrate applicability of this method. Other test cases include hypothetical multipleflapping airfoils in relative motion and store separation from a store bay.
___
- L. Ding, L. Zhiliang ve G. Tongqing, «An
efficient dynamic mesh generation method
for complex multi-block structured grid.,»
Advances in Applied Mathematics and
Mechanics, cilt 6, no. 01, pp. 120-134, 2014.
- J. Batina, "Unsteady Euler airfoil solutions
using unstructured dynamic meshes," AIAA
Journal 28 (8), p. 1381–1388, 1990.
- A. Johnson ve T. Tezduyar, «Mesh Update
Strategies in Parallel Finite Element
Computations of Flow Probblems with
Moving Boundaries and Interfaces,»
Comput. Methods Appl. Mech. Engrg.,, cilt
119, pp. 73-94, 1994.
- A. Montorfano, F. Piscaglia ve A. Onorati,
«An extension of the dynamic mesh
handling with topological changes for LES
of ICE in OpenFOAM,» 2015.
- S. T. Miller, R. L. Campbell, C. W.
Elsworth, J. S. Pitt ve D. A. Boger, «An
Overset Grid Method for Fluid-Structure
Interaction,» World Journal of Mechanics,
no. 4, pp. 217-237, 2014.
- J. Benek, P. Buning ve a. S. J.L., «A 3D
Chimera Grid Embedding Technique,»
1986.
- M. Rai, «A conservative treatment of zonal
boundaries for Euler equation calculations,»
Journal of Comp. Physics, cilt 62, pp. 472-
503, 1986.
- N. Suhs ve R. Tramel, «PEGSUS 4.0 User’s
Manual,» Arnold AFB TN, 1991.
- M. Liou ve Y. Zheng, «A Flow Solver for
Three-dimensional DRAGON Grids,» 2002.
- P. G. Bunning, 23 February 2016.
[Çevrimiçi]. Available:
https://overflow.larc.nasa.gov/.
- N. Frink, «Recent Progress Toward a ThreeDimensional
Unstructured Navier-Stokes
Flow Solver,» %1 içinde AIAA Paper, 1994,
pp. 94-0061.
- R. Noack ve D. A. Boger, «Improvements to
Suggar and Dirtlib for Overset Store
Separation Simulations.,» %1 içinde
Proceedings of the 47th AIAA Aerospace
Sciences Meeting Including the New
Horizons Forum and Aerospace Exposition,
Orlando, 2009.
- S. T. Miller, R. L. Campbell, C. W.
Elsworth, J. S. Pitt ve D. A. Boger, «An
Overset Grid Method for Fluid-Structure
Interaction,» World Journal of Mechanics,
cilt 4, no. 7, p. 21, 2014.
- E. Fadlun, R. Verzicco, P. Orlandi ve J.
Mohd-Yusof, «Combined ImmersedBoundary
Finite- Difference Methods for
Three-Dimensional Complex Flows Simulations,» Journal of Computational
Physics , cilt 161, 2000.
- C. Zhou ve J. Ai, «Mesh adaptation for
simulation of unsteady flow with moving
immersed boundaries.,» Int. J. Numer. Meth.
Fluids, no. 72, p. 453–477, 2013.
- J. Mohd-Yusof, «Combined ImmersedBoundary/B-Spline
Methods for Simulations
of Flow in Complex Geometries,» Stanford,
CA, 1997.
- R. Verzicco, J. Mohd-Yusof, P. Orlandi ve
D. Haworth, «Large Eddy Simulation in
Complex Geometric Configurations Using
Boundary Body Forces,» AIAA Journal, cilt
38, no. 3, 2000.
- C. Peskin, «Flow Patterns Around Heart
Valves: A Numerical Method,» Journal of
Computational Physics, cilt 10, 1972.
- I. Borazjani, «Fluid–structure interaction,
immersed boundary-finite element method
simulations of bio-prosthetic heart valves,»
Computer Methods in Applied Mechanics
and Engineering, cilt 257, pp. 103-116, 15
April 2013.
- Y. Tseng ve J. Ferziger, «A ghost-cell
immersed boundary method for flow in
complex geometry,» Journal of
Computational Physics, cilt 192, no. 2, pp.
593-623, 2003.
- A. Landsberg ve J. Boris, «The Virtual Cell
Embedding Gridding Method: A Simple
Approach for Complex Geometries,» %1
içinde Proceedings of 13th AIAA CFD
Conference, paper 97-1982, 1997.
- F. Lazarus ve A. Verroust, «Threedimensional
Metamorphosis: A survey,» The
Visual Computer, cilt 14, no. 8/9, p. 373–
389, 1998.
- M. Ahn ve S. Lee, «Mesh Metamorphosis
with Topological Transformations,» %1
içinde Proceedings of Pacific Graphics
2002: IEEE Computer Society Press; p.
481–482., 2002.
- G. Weber, O. Kreylos, T. Ligocki, J. Shalf,
H. Hagen, B. Hamann ve K. Joy, «Extraction
Of Crack-Free Isosurfaces From Adaptive
Mesh Refinement Data,» %1 içinde Data
Visualization 2001 (Proceedings of VisSym
’01); p 25–34, 2001.
- C. T. D. JR, «An Adaptive Hybrid Mesh
Generation Method For Complex
Geometries,» Chattanooga, 2011.
- B. Joe, «GEOMPACK--a software package
for the generation of meshes using geometric
algorithms,» Advanced Engineering
Software, cilt 13, pp. 325-331, 1991.
- E. Yilmaz ve M. Kavsaoglu, «Euler Solution
of Axisymmetric Jets in Supersonic Flow,»
Journal of Spacecraft and Rockets, cilt 35,
no. 1, 1998.
- R. Landon, «Compendium of Unsteady
Aerodynamic Measurements,» AGARD
Report 702, 1982.