___

• R. Austin, Unmanned aircraft systems. Wiley, 2010.
• Y. Ding, Y. C. Liu and F. B. Hsiao, “The application of extended Kalman filtering to autonomous formation flight of small UAV system,” Aircraft Engineering and Aerospace Technology, vol. 1, no. 2, pp. 154-186, 2013.
• A. Drak, M. Hejase, M. ElShorbagy, A. Wahyudie and H. Noura, “Autonomous Formation Flight Algorithm and Platform for Quadrotor UAVs,” International Journal of Robotics and Mechatronics, vol. 1, no. 4, pp. 124-132, 2014.
• L. De Filippis, G. Guglieri and F. B. Quagliotti, “A novel approach for trajectory tracking of UAVs,” Aircraft Engineering and Aerospace Technology: An International Journal, vol. 86, no. 3, pp. 198 – 206, 2014.
• T. Oktay, M. Uzun, H. Celik and M. Konar, “PID Based Hierarchical Autonomous System Performance Maximization of a Hybrid Unmanned Aerial Vehicle (HUAV)", Anadolu University Journal of Science and Technology – A Applied Sciences and Engineering, vol. 18, no. 3, pp. 554-562, 2017.
• H. Celik, T. Oktay and I. Turkmen, “Model Predictive Control and Robustness Test of the Unmanned Aerial Vehicle (Zanka-I) in Various Turbulence”, Journal of Aeronautics and Space Technologies, vol. 9, no. 1, pp. 31-42, 2016.
• Z. Xuetao, UAV Design and Manufacture, BS Thesis, 2010.
• Z. Lyu, K. W. Kenway and J. R. Martins, “Aerodynamic Shape Optimization Investigations of the Common Research Model Wing Benchmar,” AIAA Journal, vol. 53, no. 4, pp. 968-985, 2015.
• P. Gamboa, J. Vale, F. J. P. Lau and A. Suleman, “Optimization of a morphing wing based on coupled aerodynamic and structural constraints,” AIAA journal, vol. 47, no. 9, 2009.
• E. Feyzioglu, “Roll characteristics and shape optimization of the free to-rotate tail-fins on a canard-controlled missile,” MS Thesis, Middle East Technical University, 2014.
• R. P. Liem, J. R. Martins and G. K. Kenway, ”Expected drag minimization for aerodynamic design optimization based on aircraft operational data,” Aerospace Science and Technolog, vol. 63, pp. 344-362, 2017.
• J. E. Hicken and D. W. Zingg, “Induced-Drag Minimization of Nonplanar Geometries Based on the Euler Equations,” AIAA journal, vol. 48, no. 11, 2010.
• A. Khalid and P. Kumar, “Aerodynamic Optimization of Box Wing – A Case Study,” International Journal of Aviation, Aeronautics, and Aerospace, vol. 1, no. 4, 2014.
• T. Oktay, M. Uzun, I Yılmaz and M. Konar, “Aerodynamic nose shape optimization for performance maximization of morphing autonomous aerial robot,” International Conference on Engineering and Natural Science, Sarajevo, Bosnia and Herzegovina, 24-28 May 2016.
• S. Barbarino, F. Gandhi and S. Webster, “Design of Extendable Chord Sections for Morphing Helicopter Rotor Blades,” Journal of Intelligent Material Systems and Structures, vol. 22, no. 9, pp. 891–905, 2011.
• T. Yue and L. Wang, “Longitudinal Linear Parameter Varying Modeling and Simulation of Morphing Aircraft”, AIAA Journal of Aircraft, vol. 50, no. 6, pp. 1673-1681, 2013.
• P. Neittaanmäki, T. Rossi, S. Korotov, E. Oñate, J. Périaux and D. Knörzer, “Overview on drag reduction technologies for civil transport aircraft,” European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), 24-28, July 2004.
• M. K. Chan, “Supersonic Aircraft Optimization for Minimizing Drag and Sonic Boom,” PhD Thesis, 2003.
• S. Fu and L. Wang, “Modelling the flow transition in supersonic boundary layer with a new k–ω −γ transition/turbulence model,” 7th International Symposium on Engineering Turbulence Modelling and Measurements-ETMM7, Limassol, Cyprus, 4–6 June, 2008.
• F. Menter, “Two-equation eddy viscosity turbulence models for engineering applications,” AIAA Journal, vol. 32, pp. 1598–1605, 1994.
• R. E. Mayle and A. Schulz, “The path to predicting bypass transition,” ASME J. Turbomach, vol. 119, pp. 405–411, 1997.
• D. Choudhury, “Introduction to the renormalization group method and turbulence modeling,” Fluent Inc. Technical Memorandum, TM-107, 1993.
• D. D. Sanders, W. F. O’Brien, R. Sondergaard, M. D. Polanka and D. C. Rabe, “Predicting Separation and Transitional Flow in Turbine Blades at Low Reynolds Numbers-Part I: Development of Prediction Methodology,” J Turbomach, vol. 133, pp. 1-10, 2010.
• P. Catalano and R. Tognaccini, “Turbulence modeling for low Reynolds number flows,” AIAA Journal, vol. 48, pp. 1673-1685, 2010.
• F. R. Menter, R. B. Langtry, S.R. Likki, Y. B. Suzen, P. G. Huang and S. Völker, “A correlation based transition model using local variables: part I-model formulation,” Proceedings of ASME Turbo Expo 2004, Vienna, Austria, pp. 57–67, 2004.
• T. Misaka and S. Obayashi, “A correlation-based transition models to flows around wings,” AIAA Paper 2006–918, 2006.
• H. Chao, Y. Cao and Y. Q. Chen, Autopilots for Small Fixed-Wing Unmanned Aerial Vehicles: A Survey. IEEE International Conference on Mechatronics and Automation, Harbin, China, 2007.
• J. S. Jang and D. Liccardo, “Automation of small UAVs using a low cost MEMS sensor and embedded computing platform,” IEEE/AIAA 25th Digital Avionics Systems Conference, Portland, OR, USA, October 15-19, 2006.
• J. C. Spall, “Multivariate stochastic approximation using a simultaneousperturbation gradient approximation,” IEEE transactions on automatic control, vol. 37, no. 3, pp. 332-341, 1992.
• T. Oktay, H. Çelik and M. Uzun, “A novel learning algorithm to estimate the optimum fuselage drag coefficient,” Sakarya University Journal of Science, vol. 21, no. 1, pp. 63-68, 2017.
• U.S. Military Handbook MIL-HDBK-1797, 19 December 1997.