Baba Md DEROS, Dian Darina İndah DARUİS, Athirah Liyana ROSLY, İlhami Abd AZİZ, Nor Syazwani HİSHAMUDDİN, Nur Hidayah Abd HAMİD, Siti Maisarah ROSLİN

ERGONOMIC RISK ASSESSMENT OF MANUAL MATERIAL HANDLING AT AN AUTOMOTIVE MANUFACTURING COMPANY

This study investigates ergonomic risks faced by manual material handling (MMH) workers performing repetitive loads carrying, holding, lifting, lowering, pushing and pulling activities. A total of 11 MMH workers was recruited to participate in the study. Methods used to collect data were Modified Nordic Questionnaire (MNQ), Rapid Entire Body Assessment (REBA) and NIOSH Lifting Equation. MNQ result showed the MMH workers’ body parts that suffered pain are shoulders (63.6%), upper back (54.5%) and lower back (45.4%). The movements, which recorded high REBA score (i.e. 9) are twisting, lowering and lifting, which is considered as high risk. Based on NIOSH Lifting Equation, the value of RWL for MMH tasks is 15.82 and the lifting index (LI) is 0.73. The recommended control measures to be implemented in Company X include to limit the working time, administrative control, training, and reduce the weight of the load carried and lifted by the MMH workers.

Keywords:

Ergonomics, manual handling, REBA, NIOSH, MNQ,

PDF

___

Choi, S.D., Woletz, T. 2010. “Do stretching programs prevent work-related musculoskeletal disorders”. Journal of Safety, Health and Environmental Research, vol. 6, no. 3, pp. 1-19.
Deros, B. M., Daruis, D.D.I., Ghani, J. A., Salleh, C., Wazir, R. M., Yasim, M. K., Hassan, N.H., Saidi, M. S. 2016. “A case study on manual handling at an electronic component manufacturing company”. Malaysian Journal of Public Health Medicine, vol. 1, (Special Issue 1), pp. 1-6.
Gallis, C. 2006. “Work-Related Prevalence of Musculoskeletal Symptoms among Greek Forest Workers”. International Journal of Industrial Ergonomics, vol. 36, no. 8, pp. 731–736.
Hignett, S. & McAtamney, L. 2000. “Rapid entire body assessment (REBA)”, Applied ergonomics, vol. 31, no. 2, pp. 201-205.
Kuorinka, I., Jonsson, B., Kilbom, A., Vinterberg, H., Biering-Sørensen, F., Andersson, G., Jørgensen, K. 1987. “Standardised Nordic questionnaires for the analysis of musculoskeletal symptoms”, Applied ergonomics, vol. 18, no. 3, pp. 233-237.
Latko, W.A., Armstrong T.J., Franzblau, A., Ulin, S.S., Werner, R.A., Albers, J.W. 1999. “Cross-Sectional Studies of the relationship between repetitive work and prevalence of upper limb musculoskeletal disorders”, American Journal of Industrial Medicine, vol. 36, pp. 248-259.
Lasota, A. M. 2015. “Ergonomic evaluation of physical risk for packing line operators”, Logistics and Transport, vol. 26, no. 2, pp. 11-20.
Lin, M.I., Radwin, R.G. 1998. “Agreement between a frequency-weighted filter for continuous biomechanical measurements of repetitive wrist flexion against a load and published pshcophysical data”, Ergonomics, vol. 4, pp. 459-475.
Mittal, A., Sharma, H. K., Mittal, K. 2013. “Ergonomic Risk Controls in Construction Industry - A Literature Review”, International Journal of Emerging Research Management & Technology, vol. 2, pp. 28-33.
Nurmianto, E., Ciptomulyono, U., & Kromodihardjo, S. 2015. “Manual Handling Problem Identification in Mining Industry: An ergonomic perspective”, Procedia Manufacturing, vol. 4, pp. 89-97.
Parejo-Moscoso, J. M., Rubio-Romero, J. C., Pérez-Canto, S. 2012. “Occupational Accident Rate in Olive Oil Mills”, Safety Science, vol. 50, no. 2, pp. 285–293.
Qutubuddin, S. M., Hebbal, S. S., Kumar, A. C. S. 2013. “An ergonomic study of work related musculoskeletal disorder risks in Indian Saw Mills”, Journal of Mechanical and Civil Engineering, vol. 7, no. 5, pp. 7-13.
Revel, M., Andre-deshays, C., Roudier, R., Roudier, B., Hamard, G., Amor, B. 1992. “Effects of repetitive strains on vertebral end plates in young rats”, Clinical orthopaedics and related research, vol. 279, pp. 303-309.
Syazwani, N., Deros, B. M., Ab Rahman, M. N., Ezrin Hani, S., Norani, N., Shamsul Bahri, M. T., Shahriman, A.B., Rambely, A. S. 2016. “Ergonomic risk assessment of manual handling tools by oil palm collectors and loaders”, Malaysian Journal of Public Health Medicine, vol. 16, pp. 56-60.
Tayyari, F., Smith J.L. 1997. “Occupational Ergonomics Principle And Applications”, Chapman & Hall (London)Te H.P, & Kleiner B.H. 2001. New Development Concerning The Occupational Safety And Health Act, vol. 43, Number ½ 2001.
Waters, T. R., Putz-Anderson, V., Garg, A., Fine, L. J. 1993. “Revised NIOSH equation for the design and evaluation of manual lifting tasks”. Ergonomics, vol. 36, no. 7, pp. 749-776.
Yeung, S. S., Genaidy, A., Deddens, J., Alhemood, A., Leung, P. C. 2002. “Prevalence of musculoskeletal symptoms in single and multiple body regions and effects of perceived risk of injury among manual handling workers”, Spine, vol. 27, no. 19, pp. 2166-2172.
Zein, R. M., Halim, I., Azis, N. A., Saptari, A., Kamat, S. R. 2015. “A Survey on Working Postures among Malaysian Industrial Workers”, Procedia Manufacturing, vol. 2, pp. 450-459.

Başlangıç: 2015
Yayıncı: PressAcademia

Arşiv