Modeling Of Liquid-Liquid Equilibrium Data and Estimation of New BinaryInteraction Parameters for NRTL Model for the Quaternary System Water/ Ethanol/1-Butanol / KCL at 298.15K

The present study concerns experimental measurements of the salting-out effect on liquid-liquid phase equilibrium (LLE) of partially miscible systems such as water/ ethanol/1- butanol /Potassium chloride at 298.15K. The salt KCl was used at different mass percentages of 5, 10 and 15. The binodal and tie line data were determined by the cloud point method. The addition of the salt showed to be effective in altering the LLE of water/ ethanol/1- butanol system in favor of the solvent extraction of ethanol from the aqueous solution particularly at high salt concentrations.The experimental data were correlated considering the modified version of the NRTL model for the activity coefficient, with the estimation of new binary interaction parameters corresponding to salt-solvent and solvent-solvent pairs. The deviations between experimental and calculated compositions in both phases for the ternary system using these new interaction parameters showed the ability of NRTL to determine liquid-liquid equilibrium data of the studied systems in the presence of the salts

___

  • De La Salle S., Jansz M. and Light D., "Design of feedback control system for damping of vehicle shuffle", EAEC conference, Barcelona, 1-10, (1999).
  • Fredriksson J., Weifors H., and Egardt B., "Powertrain control for active damping of driveline oscillations", International Journal of Vehicle System Dynamics, 37(5): 359-376, (2002).
  • Baumann J., Swarnakar A. and Kiencke U., "A robust controller design for anti-jerking", SAE Technical Paper, No: 01-0041, (2005).
  • Baumann J., Torkzadeh D., Ramstein A., Kiencke U. and Schlegl, T., "Model-based predictive anti-jerk control", Control Engineering Practice, 14: 259-266, (2006).
  • Pettersson M. and Nielsen L., "Diesel engine speed control with handling of driveline resonances", Control Engineering Practice, 11: 319-328, (2003).
  • Berriri M., Chevrel P., Lefebvre D., and Yagoubi, M., "Active damping of automotive powertrain oscillations by a partial torque compensator", American Control Conference, New York, 5718-5723, (2007).
  • Webersinke L., Augenstein L. and Kienche, U., "Adaptive linear quadratic control for high dynamical and comfortable behaviour of a Heavy Truck", SAE Technical Paper, No: 01-0534, (2008).
  • Templin P. and Egardt, B., "An LQR torque compensator for driveline oscillation damping", IEEE International Conference on Control Applications, Saint Petersburg, 352-356, (2009).
  • Templin, P. and Egardt, B., "A powertrain LQT-torque compensator with backlash handling", Oil & Gas Science and Technology - Rev. IFP Energies nouvelles, 66(4): 645-654, (2011).
  • He L., Li L., Yu L., Mao E. and Song, J., "A torque-based nonlinear predictive control approach of automotive powertrain by iterative optimization", Journal of Automobile Engineering, 226(8) 1016-1025, (2012).
  • Fang C., Cao Z., Ektesabi M. M., Kapoor A. and Sayem A. H. M., "Model reference control for active drivability improvement", International Conference on Modelling, Identification and Control, Melbourne, 202-206, (2014).
  • Pacejka H., B., "Tyre and Vehicle Dynamics", Butterworth-Heinemann,9780080970165, Oxford,(2006).
  • Otkur M., Atabay O. and Ereke M., "In Cylinder Pressure Based Brake Torque Model For Diesel Engines", International Conference on Automotive & Vehicle Technologies, İstanbul, 182-191, (2013).
Politeknik Dergisi-Cover
  • ISSN: 1302-0900
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1998
  • Yayıncı: GAZİ ÜNİVERSİTESİ
Sayıdaki Diğer Makaleler

Modeling Of Liquid-Liquid Equilibrium Data and Estimation of New BinaryInteraction Parameters for NRTL Model for the Quaternary System Water/ Ethanol/1-Butanol / KCL at 298.15K

Bourayou Euchi N, Meniai A-H, Gouaoura A.

Influence of Coolant on the Performance of Electro Discharge Hole Drilling

KÜRŞAD GÖV

DistaloyAB Tozundan Üretilmiş ve Elmas Nanoparçacık Katkılı Krom Kaplanmış Toz Metal Malzemelerin Korozyon Davranışlarının Araştırılması

E. Zeynep BİLGİLİ, Elmas SALAMCI, ABDURRAHMAN ASAN

Yapay Sinir Ağları ile Dinamik Ağırlık Tahmin Uygulaması

MEHMET YUMURTACI, İSMAİL YABANOVA

AISI 304 ve AISI 316 Östenitik Paslanmaz Çeliklerin İşlenebilirliğinin Değerlendirilmesi

NURSEL ALTAN ÖZBEK, ADEM ÇİÇEK, Mahmut GÜLESİN, ONUR ÖZBEK

A Web-Based Educational Tool For Simulation of Reactive Power Compensation With Synchronous Motor

RAMAZAN BAYINDIR, SEYFETTİN VADİ

Determination of Contact Parameters of Au/n-Ge Schottky Barrier Diode with Rubrene Interlayer

MURAT YILDIRIM

Isıl İşlemin Bazı Ağaç Malzemelerde Yüzey Pürüzlülüğü ve Vernik Yapışma Direncine Etkisi

SUAT ALTUN, Musa ESMER

Türk İnşaat Sektöründe Çalışanların Güvenlik Kültürü Düzeyinin ve Güvenlik Performansı ile İlişkisinin İncelenmesi

Serkan YILDIZ, Mustafa YILMAZ

Adaptif Hız Kontrol (AHK) Sistemindeki Mesafe Kontrol Sisteminin Sabit Mesafe Ve Sabit Zaman Yöntemleriyle Uygulamalı Olarak Karşılaştırılması

Hasan ŞAHİN