A Smart Energy Management System Design for Residential Power Plants

In this study, a solar-hydrogen hybrid power generation system is modeled by developing a smart energy management system (EMS) to sustain a continuous power flow for a local load in a constituted residential hybrid power plant. The developed EMS checks the total energy demand of the hybrid power plant and operates the solar power plant or the hydrogen energy based power plant to provide a sustainable power for the local load. A new control card is developed and a real-time EMS is performed in Labview for controlling and monitoring the hybrid system. The implemented electronic control card manages the active power flow of the hybrid system to provide a sustainable power demand of the local load. The current energy demand of the residential power plants can be viable in the lack of the sun or hydrogen, thanks to the developed EMS. The proposed EMS is modeled in Matlab/Simulink, and verified by the experimental study. The experimental results show that the proposed EMS provides a sustainable energy infrastructure for the residential hybrid power plants, and it is also easy implemented and suitable for residential real system applications. 

___

  • [1] Cetin E., Yilanci A., Ozturk H.K., Colak M., Kasikci I., and Iplikci S., “A micro-DC power distribution system for a residential application energized by photovoltaic–wind/fuel cell hybrid energy systems”, Energy and Buildings, 42: 1344-1352, (2010). [2] Zervas P.L., Sarimveis H., Palyvos J.A. and Markatos N.C.G., “Model-based optimal control of a hybrid power generation system consisting of photovoltaic arrays and fuel cells”, J. of Power Sources, 181: 327–338, (2008). [3] Li C.H., Zhu X.J., Cao G.Y., Sui S. and Hu M.R., “Dynamic modeling and sizing optimization of stand-alone photovoltaic power systems using hybrid energy storage technology”, Renewable Energy, 34: 815–826, (2009). [4] Bayrak G., “A remote islanding detection and control strategy for photovoltaic-based distributed generation systems”, Energy Conversion and Management, 96: 228-241, (2015). [5] Yilanci A., Dincer I. and Ozturk H.K., ‘‘A Review on Solar-Hydrogen/Fuel Cell Hybrid Energy Systems for Stationary Applications’’, Progress in Energy and Combustion Science, 35: 231-244, (2009). [6] Scrivano G., Piacentino A., Cardona F., “Experimental characterization of PEM fuel cells by micro-models for the prediction of on-site performance”, Renewable Energy, 34: 634–639, (2009). [7] Roshandel R., Seyedin F., “Modeling and energy analysis of solar hydrogen fuel cell system for residential applications”, Proceedings of the ASME 9th Fuel Cell Science, Engineering and Technology Conference Fuel Cell, Washington, DC, USA, (2011). [8] Li C.H., Zhu X.J., Cao G.Y., Sui S. and Hu M.R., “Dynamic modeling and sizing optimization of stand-alone photovoltaic power systems using hybrid energy storage technology”, Renewable Energy, 34: 815–826, (2009). [9] Ahmed N.A., Al-Othman A.K. and Rashidi M.R., “Development of an efficient utility interactive combined wind/photovoltaic/fuel cell power system with MPPT and DC bus voltage regulation”, Electric Power Systems Research, 81: 1096–1106, (2011). [10] ain S., Jiang J., Huang X. and Stevandic S., “Modeling of fuel cell based power supply system for grid interface”, IEEE Transactions on Industry Applications, 48 (4): 1142–1153, (2012). [11] Bayrak G. and Cebeci M., “Grid connected fuel cell and PV hybrid power generating system design with Matlab Simulink”, International Journal of Hydrogen Energy, 39: 8803-8812, (2014). [12] Bayrak, Z. U., Bayrak, G., Ozdemir, M. T., Gencoglu, M. T., and Cebeci, M. ‘‘A low-cost power management system design for residential hydrogen & solar energy based power plants’’, International Journal of Hydrogen Energy, 41: 12569-12581, (2016). [13] Khan M. J., and Iqbal M. T., "Dynamic modelling and simulation of a fuel cell generator", Fuel Cells, 5: 97-104, (2005). [14] Chenni, R., et al. “A detailed modeling method for photovoltaic cells”, Energy, 32(9): 1724-1730, (2007). [15] Ganguly A., Misra D. and Ghosh S., “Modeling and analysis of solar photovoltaic-electrolyzer-fuel cell hybrid power system integrated with a floriculture greenhouse”, Energy and Buildings, 42: 2036–2043, (2010).
Politeknik Dergisi-Cover
  • ISSN: 1302-0900
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1998
  • Yayıncı: GAZİ ÜNİVERSİTESİ
Sayıdaki Diğer Makaleler

Hydroxyapatite Coating on Ti6Al4V Alloy Surface Through Biomimetic Method Using Glycolic Acid - Sodium Gluconate Buffer System and Examination of Properties of the Coating

İBRAHİM AYDIN, Ferdi ENGİN

Polimerik Atıklar İçeren Betonun Ultrason Hızının ve Dinamik Elastisite Modülünün Çok Yanıtlı Eniyilenmesi

Barış ŞİMŞEK, Tayfun UYGUNOĞLU

Okul Yeri Seçiminde Coğrafi Bilgi Sistemine Dayalı AHP-TOPSIS Yaklaşımı: Ankara İli Örneği

AYŞENUR USLU, Kübra KIZILOĞLU, SELÇUK KÜRŞAT İŞLEYEN, Erkay KAHYA

A Smart Energy Management System Design for Residential Power Plants

ZEHRA URAL BAYRAK, GÖKAY BAYRAK

The Effects of Critical Welding Parameters on Tensile-Shear Properties of Friction Stir Spot Welded Polyethylene

BEKİR ÇEVİK, BEHÇET GÜLENÇ, AHMET DURGUTLU

Ters Sarkaç Sisteminin Yapay Arı Kolonisi Algoritması ile Optimizasyonu

HÜSEYİN OKTAY ERKOL

Effects of Frequency and Bias Voltage on Dielectric Properties and Electric Modulus of Au/Bi4Ti3O12/n-Si (MFS) Capacitors

PERİHAN DURMUŞ, ÇİĞDEM BİLKAN, MERT YILDIRIM

Comparison Of Particle Swarm And Differential Evolution Optimization Algorithms Considering Various Benchmark Functions

HASAN ÖZCAN

Bir Termik Santralin Performans Analizi ve Rehabilitasyon Metotları

M. Bahadır ÖZDEMİR, TAYFUN MENLİK, H. ibrahim VARiYENLi, Levent SEVİN

Yutucu Plaka Üzerine Konik Yayların Yerleştirildiği Güneş Enerjili Hava Kollektörünün Bulanık Mantık ile Modellenmesi

MESUT ABUŞKA, MEHMET BAHATTİN AKGÜL, VOLKAN ALTINTAŞ