Current Operational Amplifier Based Voltage-Mode MOS-C All-Pass Filter and Its Application
In this work, a novel first order voltage-mode all-pass filter employing single active element named current operational amplifier (COA), two resistors, one capacitor and it’s application as sinusoidal oscillator is presented. The resistors are implemented by using MOSFETs, so the resulting MOS-C circuit is suitable for integration and the central frequency of the filter is electronically tunable. Workability of the proposed filter and it’s application is validated by PSPICE simulation software using TSMC 0.18 micron CMOS model parameters. Simulation results are in good consistency with theoretical analysis. The proposed circuit features precise frequency tuning, operability at low voltage, low distortion and low phase error.
Current Operational Amplifier Based Voltage-Mode MOS-C All-Pass Filter and Its Application
In this work, a novel first order voltage-mode all-pass filter employing single active element named current operational amplifier (COA), two resistors, one capacitor and it’s application as sinusoidal oscillator is presented. The resistors are implemented by using MOSFETs, so the resulting MOS-C circuit is suitable for integration and the central frequency of the filter is electronically tunable. Workability of the proposed filter and it’s application is validated by PSPICE simulation software using TSMC 0.18 micron CMOS model parameters. Simulation results are in good consistency with theoretical analysis. The proposed circuit features precise frequency tuning, operability at low voltage, low distortion and low phase error.
___
- [1] Schauman R.,Van Valkenburg, “Design of Analog Filters”, Oxford Univ. Press: New York, (2001).
- [2] Toker A., Özoğuz S., Çiçekoğlu O., Acar C., “Current-mode all-pass filters using current differencing buffered amplifier and a new high-Q bandpass filter configuration”, IEEE Circuits and Systems II; Analog and Digital Signal Processing, 47 (2000): 949- 954, (2010).
- [3] Horng J. W., Hou C.-L., Chang C.M., Lin Y.T., Shiu I.C., Chiu W.Y., “First-order all-pass filter and sinusoidal oscillators using DDCCs”, Int. J. of Electronics, 93: 457–466, (2006).
- [4] Minaei S., Çiçekoglu O., “A Resistorless realization of the firstorder all-pass filter”, Int. J. of Electronics, 93: 177-183, (2006).
- [5] Singthong P., Siripruchyanun M., Jaikla W., “Electronically controllable first-order current-mode all-pass filter using CCCIIs and its application”, 18th International Conference Mixed Design of Integrated Circuits and Systems (MIXDES), Poland, 314-318, (2011).
- [6] Beg P., “Tunable First-Order Resistorless All-Pass Filter with Low Output Impedance”, The Scientific World Journal, 1-6, (2014).
- [7] Keskin A.Ü., Pal K., Hancıoğlu E., “Resistorless first-order all-pass filter with electronic tuning”, International Journal of Electronics and Communication (AEÜ), 62: 304- 306, (2008).
- [8] Ün F., Kaçar F., “Voltage Type First Order All-Pass Filter Employing Fully Differential Current Feedback Operational Amplifier and Its Application”, Journal of Science and Technology, 2: 115-122, (2008).
- [9] Kaçar F., Özcelep Y., “CDBA Based Voltage-Mode First-Order All-pass Filter Topologies”, IU-Journal of Electrical & Electronics Engineering, 11: 1327-1332, (2011).
- [10] Metin B., Çiçekoğlu O., Pal K., “Voltage Mode All-pass Filter with a Single Current Differencing Buffered Amplifier”, 51st Midwest Symposium on Circuits and Systems (MWSCAS), USA, 734-737, (2008).
- [11] Çam U., Çiçekoğlu O., Gülsoy M., “New Voltage and Current Mode First-order All-pass Filters Using Single FTFN”, Frequenz, 54: 177-179, (2000).
- [12] Kılınç S., Çam U., “Current-mode first-order all-pass filter employing Single current operational amplifier”, Journal of Analog Integrated Circuits and Signal Processing, 41: 47-53. (2004).
- [13] Altun M., Kuntman H., “Yüksek başarımlı, tümüyle farksal akım Modlu işlemsel kuvvetlendirici (COA) tasarımı ve tüm geçiren süzgeç yapısında kullanımı”, ELECO 2006: Elektrik-Elektronik ve Bilgisayar Mühendisliği Sempozyumu, Bursa, Turkey, 46-49, (2006).
- [14] Çiçekli H., Gökçen A., “Synthesis of Voltage-Mode All-pass Filter Employing Single Current Operational Amplifier”, International Journal of Communications, 10: 76-79, (2016).
- [15] Altun M., Kuntman H., “A High-Drive Fully Differential Current Mode Operational Amplifier Providing High Output Impedance and Filter Application”, ELECO 2007: The 5th International Conference on Electrical and Electronics Engineering, Bursa, Turkey, 44-47, (2007).
- [16] Kılınç S., Saygıner M., Çam U., Kuntman H., “Simple and accurate macromodel for current operational amplifier (COA)”, ELECO 2005: The 4th International Conference on Electrical and Electronics Engineering, Bursa, Turkey, 1-5, (2005).
- [17] Kaulberg T., “A CMOS Current-Mode Operational Amplifier”, IEEE Journal of Solid-State Circuits, 28: 849- 852, (1993).
- [18] Safari L., Azhari S. J., “A High Performance Fully Differential Pure Current Mode Operational Amplifier and Its Applications”, Journal of Engineering Science and Technology, 7: 471-486, (2012).
- [19] Gökçen A., “New Possibilities in The Design of Analog Integrated Circuit with MOS-C Realization”, Dokuz Eylül University, Graduate School of Natural and Applied Sciences, Ph.D. Thesis, (2010).
- [20] Minhaj N., “Dual-Output Second-Generation Current Conveyor based Voltage Mode Sinusoidal Oscillator modified for Chaos Generators”, International Journal of Recent Trends in Engineering, 2: 315-318, (2009).