___

• Jasienko J, Logon D, Misztal W. "Trass-lime reinforced mortars in strengthening and reconstruction of historical masonry walls". Construction and Building Materials, 102, 884–892, 2016. Koçak Y, Dorum A, Yılmaz B, Uçar A. “Trasın çimento yüzey özelliğine, hidratasyona ve basınç dayanımına etkisi”. E-Journal of New World Sciences Academy Technological Applied Sciences, 5(1), 1-14, 2010. Koçak Y. “Tras ikame oranının portland çimentosunun fiziksel ve mekanik özelliklerine etkisi”. E-Journal Of New World Sciences Academy Engineering Sciences, 5(3), 564-572, 2010. Xu S, Wang J, Jiang Q, Zhang S. "Study of natural hydraulic lime-based mortars prepared with masonry waste powder as aggregate and diatomite/fly ash as mineral admixtures". Journal of Cleaner Production, 119, 118-127, 2016. Gerengi H, Kocak Y, Jażdżewska A, Kurtay M, Durgun H. "Electrochemical investigations on the corrosion behaviour of reinforcing steel in diatomite-and zeolite-containing concrete exposed to sulphuric acid". Construction and Building Materials, 49, 471-477, 2013. Pavlik V, Uzakova M. “Effect of curing conditions on the properties of lime, lime-metakaolin and lime-zeolite mortars”. Construction and Building Materials, 102, 14-25, 2016. Kocak Y, Tascı E, Kaya U. “The effect of using natural zeolite on the properties and hydration characteristics of blended cements”. Construction and Building Materials, 47, 720-727, 2013. Yıldız K, Dorum A, Koçak Y. “The investigation of the effect of minerological molecular electrokinetic and thermal compliance of pumice, zeolite and CEM I cement on high strength concrete”. Journal of the Faculty of Engineering and Architecture of Gazi University, 25(4), 867-879, 2010. Shoukry H, Kotkata MF, Abo-EL-Enein SA, Morsy MS, Shebl SS. “Enhanced physical, mechanical and microstructural properties of lightweight vermiculite cement composites modified with nano metakaolin”. Construction and Building Materials, 112, 276-283, 2016. Subaşı A, Emiroğlu M. “Effect of metakaolin substitution on physical, mechanical and hydration process of white Portland cement”. Construction and Building Materials, 95, 257-268, 2015. Helmy AII. “Intermittent curing of fly ash geopolymer mortar”. Construction and Building Materials, 110, 54-64, 2016. Subasi S, Emiroglu M, Kocak Y. “Effect of fly ash on rebars bond strength in the expanded clay aggregate lightweight concrete”. Cement Wapno Beton, 1, 1-13, 2012. Kocak Y, Nas S. "The effect of using fly ash on the strength and hydration characteristics of blended cements". Construction and Building Materials, 73, 25-32, 2014. Kocak Y, Subaşı S, Emiroğlu M. “Uçucu külün betonun bazı fiziksel ve mekanik özelliklerine etkisi”. Yapı Teknolojileri Elektronik Dergisi, 7(1), 14-27, 2011. Kocak Y. “A study on the effect of fly ash and silica fume substituted cement paste and mortars”. Scientific Research and Essays, 5(9), 990-998, 2010. Zhang Z, Zhang B, Yan P. “Comparative study of effect of raw and densified silica fume in the paste, mortar and concrete”. Construction and Building Materials, 105, 82-93, 2016. Dorum A, Koçak Y, Yılmaz B, Uçar A. “Yüksek fırın cürufunun çimento yüzey özelliklerine ve hidratasyona etkileri”. Dumlupınar Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 19, 47-58, 2009. Kürklü G. “The effect of high temperature on the design of blast furnace slag and coarsefly ash-based geopolymer mortar”. Composites Part B, 92, 9-18, 2016. Erdoğdu K, Tokyay M, Türker P. Traslar ve Traslı Çimentolar. Ankara, Türkiye, TÇMB/AR-GE/Y99.2, 1999. Türkmenoğlu AG, Tankut A. “Use of tuffs from central Turkey as admixture in pozzolanic cements Assessment of their petrographical properties”. Cement and Concrete Research, 32(4), 629-637, 2002. Yetkin Ş, Çavdar A. “Doğal puzolan katkıoranının çimentonun dayanım, işlenebilirlik, katılaşma ve hacim genleşmesi özelliklerine etkisi”. Fırat Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 17(4), 687-692, 2005. Shannag MJ. “High strength concrete containing natural pozzolan and silica fume”. Cement & Concrete Composites, 22/6), 399-406, 2000. Erdoğan TY. Beton. Ankara, Türkiye, ODTÜ Geliştirme Vakfı Yayıncılık ve İletişim AŞ, 2003. Canpolat F, Yılmaz K, Kose MM, Sumer M, Yurdusev MA. “Use of zeolite, coal bottom ash and fly ash as replacement materials in cement production”. Cement & Concrete Composites, 34(5), 731-735, 2004. Targan S¸ Olgun A, Erdogan Y, Sevinc V. “Influence of natural pozzolan, colemanite ore waste, bottom ash and fly ash on the properties of portland cement”. Cement and Concrete Research, 33(8), 1175-1182, 2003. Türk Standartları Enstitüsü. “Çimento Deney Metotları-Bölüm 1: Dayanım Tayini”. Ankara, Türkiye, TS EN 196-1, 2009. Türk Standartları Enstitüsü. “Çimento Deney Yöntemleri-Bölüm 6: İncelik Tayini”. Ankara, Türkiye, TS EN 196-6, 2010. Türk Standartları Enstitüsü. “Çimento Deney Metotları- Bölüm 3: Priz Süresi ve Hacim Genleşme Tayini”. TS EN 196-3, Ankara, Türkiye, 2010. Perraki Th, Kakali G, Kontoleon F. “The effect of natural zeolites on the early hydration of Portland cement”. Microporous and Mesoporous Materials, 61(1-3), 205-212, 2003. Gomes CEM, Ferreira OP, Fernandes MR. “Influence of vinyl acetate-versatic vinylester copolymer on the microstructural characteristics of cement pastes”. Material Research, 8(1), 51-56, 2005. Pan Z, Cheng L, Lu Y, Yang N. “Hydration products of alkali-activated slag-red mud cementitious material”. Cement and Concrete Research, 32(3), 357-362, 2002. Zhang T, Shang S, Yin F, Aishah A, Salmiah A, Ooi TL. “Adsorptive behavior of surfactants on surface of portland cement”. Cement and Concrete Research, 31(7), 1009-1015, 2001. Prince W, Espagnea M, Aitcin PC. “Etrenjit formation: A crucial step in cement superplasticizer compatibility”. Cement and Concrete Research, 33(5), 635-641, 2003. Skripkıunas G, Sasnauskas V, Dauksys M, Palubinskaite D. “Peculiarities of hydration of cement paste with addition of hydrosodalite”. Materials Science, 25(3), 627-635, 2007. Türk Standartları Enstitüsü. “Çimento-Bölüm 1: Genel Çimentolar-Bileşim, Özellikler ve Uygunluk Kriterleri”. Ankara, Türkiye, TS EN 197-1, 2012. Rytwo G, Trop D, Serban C. “Adsorption of diquat, paraquat and methyl green on sepiolite: experimental results and model calculations”. Applied Clay Science, 20(6), 273-282, 2002.