Erkin AKDOĞAN, Ali Rıza TARAKCILAR, Muzaffer TOPÇU, Recep YURTSEVEN

ALÜMİNYUM HİDROKSİT VE MAGNEZYUM HİDROKSİT KATKISININ TERMOPLASTİK POLİÜRETAN MALZEMELERİN MEKANİK ÖZELLİKLERİNE ETKİSİ

Termoplastik poliüretan malzemeler, üstün fiziksel ve kimyasal özellikleri sebebiyle, otomotiv, giyim, elektrik-elektronik, tıp, inşaat, makine sektörlerinde geniş bir kullanım alanına sahiptir. Termoplastik poliüretan malzemelerin, yanmaya ve yüksek sıcaklığa karşı dirençleri düşüktür. Bu özelliklerinin iyileştirilebilmesi için poliüretan matris içerisine katkı ve dolgu maddeleri ilave edilmektedir. Özellikle alev geciktirici olarak ilave edilen bu maddeler poliüretan malzemelerin mekanik özelliklerini de etkilemektedir. Dolayısıyla bu malzemelerin mekanik özelliklerinin de belirlenmesi önem arz etmektedir. Bu çalışmada, termoplastik poliüretan malzemelere kütlece %5 oranında alüminyum tri hidroksit (ATH, (Al2O3 3H2O)) ve magnezyum hidroksit (MgOH, (Mg(OH)2)) ilave edilmiştir. Oluşturulan kompozit yapının yanmaya karşı direncini artırmak için inorganik alev geciktiriciler ile birlikte kabaran alev geciktirici olarak amonyum polifosfat (APP) ilave edilmiştir. Üretilen kompozitlere çekme, yırtılma, sertlik ve Izod darbe deneyleri yapılarak karşılaştırılmıştır. Deneyler sonucunda, ATH ilavesinin çekme dayanımı ve yırtılma dayanımında düşüşe sebep olmasına rağmen, MgOH ilavesinin bir miktar arttırdığı görülmüştür. Her iki katkı maddesinin de sertlik ve Izod darbe deneyleri sonucunda olumsuz bir etki oluşturmadığı görülmüştür

THE EFFECTS OF ALUMINIUM HYDROXIDE AND MAGNESIUM HYDROXIDE ON THE MECHANICAL PROPERTIES OF THERMOPLASTIC POLYURETHANE MATERIALS

Thermoplastic polyurethane materials are widely used in automotive, clothing, electrical and electronics, medical, construction, machine industry due to excellent physical and chemical properties. Thermoplastic polyurethane materials combustion and resistance to high temperature characteristics are poor. Additives and fillers are added into the polyurethane matrix to improve those properties. Particularly adding these agents as a flame retardant are affect mechanical properties of polyurethane materials. Therefore, it is important to determinate the mechanical properties of these materials. In this study, 5% by weight of the thermoplastic polyurethane material, aluminium tri hydroxide (ATH, (Al2O3 3H2O)) and magnesium hydroxide (MgOH, (Mg(OH)2)) were added. Ammonium polyphosphate (APP) as an intumescent flame retardant with inorganic flame retardants were added to increase the flame resistance of produced composite structure. Tensile test, tear test, hardness and Izod impact tests were made and compared of those produced composites. As a result of experiments the addition of ATH has lowered the tensile strength and tear strength contrast to this the addition of MgOH has improved those properties. Hardness and Izod impact test results were showed that both of the additives have no negative effect

PDF

___

Ayrılmış N. "Combined Effects of Boron and Compatibilizer on Dimensional Stability and Mechanical Properties of Wood/HDPE Composites". Composites: Part B, 44(1), 745-749, 2013.
Isıtman NA, Kaynak C. "Effect of Partial Substitution of Aluminum Hydroxide with Colemanite in Fire Retarded Low-Density Polyethylene". Journal of Fire Sciences, 31(1), 73-84, 2012.
Kurt R, Mengeloğlu F. "Utilization of Boron Compounds as Synergists with Ammonium Polyphosphate for Flame Retardant Wood-Polymer Composites". Turkish Journal of Agriculture and Forestry, 35(2), 155-163, 2011.
Li S, Long B, Wang Z, Tian Y, Zheng Y, Zhang Q. "Synthesis of Hydrophobic Zinc Borate Nanoflakes and Its Effect on Flame Retardant Properties of Polyethylene". Journal of Solid State Chemistry, 183(4), 957-962, 2010.
Nyambo C, Kandare E, Wilkie CA. "Thermal Stability and Flammability Characteristics of Ethylene Vinyl Acetate (EVA) Composites Blended with a Phenyl Phosphonate- Intercalated Layered Double Hydroxide (LDH), Melamine Polyphosphate and/or Boric Acid". Polymer Degradation and Stability, 94(4), 513-520, 2009.
Ramazani SAA, Rahimi A, Frounchi M, Ramdan S. "Investigation of Flame Retardancy and Physical- Mechanical Properties of Zinc Borate and Aluminum Hydroxide Propylene Composites". Materials and Design, 29(5), 1051-1056, 2008.
Haurie L, Fernandez AI, Velasco JI, Chimenos JM, Lopez- Cuesta JM, Espiell F. "Effects of Milling on The Thermal Stability of Synthetic Hydromagnesite". Materials Research Bulletin, 42(6), 1010-1018, 2007.
Atikler U, Demir H, Tokatlı F, Tıhmınlıoğlu F, Balköse D, Ülkü S. "Optimisation of the Effect of Colemanite as a New Synergistic Agent in an Intumescent System". Polymer Degradation and Stability, 91(7), 1563-1570, 2006.
Hanu LG, Simon GP, Cheng YB. "Thermal Stability and Flammability of Silicone Polymer Composites". Polymer Degradation and Stability, 91(6), 1373-1379, 2006.
Sain M, Park SH, Suhara F, Law S. "Flame Retardant and Mechanical Properties of Natural Fibre-PP Composites Containing Magnesium Hydroxide". Polymer Degradation and Stability, 83(2), 363-367, 2004.
Chen X, Jiang Y, Jiao C. "Smoke Suppression Properties of Ferrite Yellow on Flame Retardant Thermoplastic Polyurethane based on Ammonium Polyphosphate". Journal of Hazardous Materials, 266(1), 114-121, 2014.
Xue M, Zhang X, Wu Z, Wang H, Gu Z, Bao C, Tian X. "A Commercial Phosphorous-Nitrogen Containing Intumescent Flame Retardant for Thermoplastic Polyurethane". Journal of Applied Polymer Science, 131(2), 1-6, 2013.
Tabuani D, Bellucci F, Terenzi A, Camino G. "Flame Retarded Thermoplastic Polyurethane (TPU) for Cable Jacketing Application". Polymer Degradation and Stability, 97(12), 2594-2601, 2012.
Zhao K, Xu W, Song L, Wang B, Feng H, Hu Y. "Synergistic Effects Between Boron Phosphate and Microencapsulated Ammonium Thermoplastic Polyurethane Composites". Polymers for Advanced Technologies, 23(5), 894-900, 2011.
Lin M, Li B, Li Q, Li S, Zhang S. "Synergistic Effect of Metal Oxides on the Flame Retardancy and Thermal Degradation of Novel Intumescent Flame-Retardant Thermoplastic Polyurethanes". Journal of Applied Polymer Science, 121(4), 1951-1960, 2011.
Bourbigot S, Turf T, Bellayer S, Duquesne S. "Polyhedral Oligomeric Silsesquioxane as Flame Retardant for Thermoplastic Polyurethane". Polymer Degradation and Stability, 94(8), 1230-1237, 2009.
Quan H, Zhang B, Zhao Q, Yuen RKK, Li RKY. "Facile Preparation and Thermaldegradation Studies of Graphite Nanoplatelets (GNPs) Filled Thermoplastic Polyurethane (TPU) Nanocomposites". Composites: Part A, 40(9), 1506- 1513, 2009.
Liu Y, Liu M, Xie D, Wang Q. "Thermoplastic Polyurethane- Encapsulated Melamine Phosphate Flame Retardant Polyoxymethylene". Polymer-Plastics Technology and Engineering, 47(3), 330-334, 2008.
Könnicke D, Kühn A, Mahrholz T, Sinapius M. "Polymer Nanocomposites Based on Epoxy Resin and ATH as a New Flame Retardant for CFRP: Preparation and Thermal Characterisation". Journal of Materials Science, 46(21), 7046-7055, 2011.
Zhang J, Hereid J, Hagen M, Bakirtzis D, Delichatsios MA, Fina A, Castrovinci A, Camino G, Samyn F, Bourbigot S. "Effects of Nanoclay and Fire Retardants on Fire Retardancy of a Polymer Blend of EVA and LDPE". Fire Safety Journal, 44(4), 504-513, 2009.
Meng XY, Ye L, Zhang XG, Tang PM, Tang JH, Ji X, Li ZM. "Effects of Expandable Graphite and Ammonium Polyphosphate on the Flame-Retardant and Mechanical Properties of Rigid Polyurethane Foams". Journal of Applied Polymer Science, 114(2), 853-863, 2009.
Li B, Jia H, Guan L, Bing B, Dai J. "A Novel Intumescent Flame-Retardant System for Flame-Retarded LLDPE/EVA Composites". Journal of Applied Polymer Science, 114(6), 3626-3635, 2009.
Tarakcılar AR. "The Effects of Intumescent Flame Retardant Pentaerythritol Physicomechanical Properties of Rigid Polyurethane Foams". Journal of Applied Polymer Science, 120(4), 2095-2102, 2011. Ammonium Fly Ash on and Fillers the
Usta N. "Investigation of Fire Behavior of Rigid Polyurethane Foams Containing Fly Ash and Intumescent Flame Retardant by using a Cone Calorimeter". Journal of Applied Polymer Science, 124(4), 3372-3382, 2012.
ASTM D 618-08. "Standard Practice for Conditioning Plastics for Testing". American Society for Testing and Materials, New York, 2008.
ASTM D 638-08. "Standard Test Method for Tensile Properties of Plastics". American Society for Testing and Materials, New York, 2008.
ASTM D 412-06. "Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers". American Society for Testing and Materials, New York, 2006.
ASTM D 624-00. "Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers". American Society for Testing and Materials, New York, 2007.
ASTM D 256-06. "Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics". American Society for Testing and Materials, New York, 2006.
Hamid Y, Bakar AA, Deirram N. "Mechanical and Morphological Properties of Waste Eurycoma Longifolia Fiber/Montmorillonite Reinforced Poly (vinyl chloride) Hybrid Composites". Journal of Applied Polymer Science, 128(2), 1170-1175, 2012.