Eren TİMURTAŞ, Gazi AKGÜN, Ender Ersin AVCI, Neslihan KARABACAK, Gökçe KARTAL, Mine Gülden POLAT, İlkşan DEMİRBÜKEN

Üç Boyutlu Yazıcı ile Kuğu Boynu Deformitesi için Kişiye Özgü Parmak Ortez Üretimi ve Kullanıcı Memnuniyeti

Amaç: Kuğu boynu deformitesi, proksimal interfalangeal eklemin hiperekstansiyonu, distal interfalangeal eklemin fleksiyonu ile karakterizedir. Tedavi sürecinde, konservatif yöntemlere ek olarak kullanılan ortezlerin çeşitli şekillerde üretimi mevcuttur. Son dönemlerde öne çıkan üç boyutlu (3B) yazıcı teknolojileri ortez üretiminde de kullanılmaktadır. Bu çalışmanın amacı kuğu boynu parmak deformitesi olan kişilere 3B yazıcı kullanarak yüzük ortezi üretmek ve bu kişilerin ortez memnuniyet düzeyini değerlendirmekti.

Anahtar Kelimeler:

Üç Boyutlu Yazıcı, ortez üretimi, Kuğu boynu deformitesi

Custom Finger Orthosis Production and User Satisfaction for Swan Neck Deformity with Three-Dimensional Printer

Objective: Swan-Neck deformity is characterized by hyperextension of proximal interphalangeal joint and flexion of distal interphalangeal joint. In the treatment process, in addition to conservative methods, orthoses are produced in various ways. Recently, prominent three-dimensional (3D) printer technologies are also used in orthotics production. The aim of this study was to produce a ring orthosis using a 3D printer for the population with swan neck finger deformity and to evaluate the orthosis satisfaction level of these individuals.

Keywords:

Swan neck deformities, three-dimensional printing, orthotics production,

PDF

___

Fox PM, Chang J. Treating the proximal interphalangeal joint in swan neck and boutonniere deformities. Hand Clin. 2018;34(2):167-176. doi:10.1016/j.hcl.2017.12.006
Vedel PN, Tranum-Jensen J, Dahlin LB, Brogren E, Søe NH. Deformities of the finger joints. Ugeskr Læger. 2017;179(48):V04170324.
Humpl D, Ferry KA, Rawlins LD, Tate K. Splinting, taping, and adaptation. In: Pediatric Hand Therapy. 5th ed. Elsevier. 2020;57-76. doi:10.1016/B978-0-323-53091-0.00005-1
Aydın L, Küçük S, Kenar H. Design and construction of a 3d bioprinter for bioprinting of tissues and organs. Proceedings on the Tıp Tekno. 2015;15(1):153-157.
Portnoy S, Barmin N, Elimelech M, ve ark. Automated 3D-printed finger orthosis versus manual orthosis preparation by occupational therapy students: Preparation time, product weight, and user satisfaction. Journal of Hand Therapy. 2020;33(2):174-179. doi:10.1016/j.jht.2020.03.022
Lunsford C, Grindle G, Salatin B, Dicianno BE. Innovations with 3-dimensional printing in physical medicine and rehabilitation: A review of the literature. PM R. 2016;8(12):1201-1212. doi:10.1016/j.pmrj.2016.07.003
Sedlacek F, Lašová V. Additive manufacturing of PA6 with short carbon fibre reinforcement using fused deposition modelling. Trans Tech Publ. 2018;928:26-31. doi:10.4028/www.scientific.net/MSF.928.26
Aydin L, Küçük S. Design and construction of ankle foot orthosis by means of three dimensional printers. Journal of Polytechnic. 2017;20(1):1-8 doi:10.2339/2017.20.1
Demers L, Weiss-Lambrou R, Ska B. Development of the Quebec user evaluation of satisfaction with assistive technology (QUEST). Assist Technol. 1996;8(1):3-13. doi:10.1080/10400435.1996.10132268
Demers L, Monette M, Lapierre Y, Arnold D, Wolfson C. Reliability, validity, and applicability of the Quebec User Evaluation of Satisfaction with assistive Technology (QUEST 2.0) for adults with multiple sclerosis. Disabil. 2002;24(1-3):21-30. doi:10.1080/09638280110066352
Yakut Y, Yurt Y, Yagci G, Simsek E. Quebec Yardımcı Teknoloji Kullanıcı Memnuniyeti Değerlendirme 2.0 Anketi’nin protez ve ortez kullanan bireylerde Türkçe adaptasyonu. JETR. 2020;7(3):284-295.
Mavroidis C, Ranky RG, Sivak ML, ve ark. Patient specific ankle-foot orthoses using rapid prototyping. J Neuroeng. 2011;8(1):1-11. doi:10.1186/1743-0003-8-1
Altunkaynak D. 5 eksen 3 boyutlu yazıcı tasarımı ve uygulaması. Karabük Üniversitesi Endüstriyel Tasarım Mühendisliği Anabilim Dalı, Yüksek Lisans Tezi. Karabük, Türkiye. 2020.
Çirak ZD, Yakinci DB. Tıbbi uygulamalarda kullanılan biyouyumlu biyomalzemeler. İnönü Üniversitesi Sağlık Hizmetleri Meslek Yüksek Okulu Dergisi. 2020;8(2):515-526. doi:10.33715/inonusaglik.745301
Otepbergenov T, Smagulov Z, Abilgaziyev A, Kurokawa S, Ali MH. Numerical and experimental analysis of the 3D printed multi-material ankle-foot orthosis. J Phys Conf Ser. 2020;1510(1):012012. doi:10.1088/1742-6596/1510/1/012012
Baronio G, Volonghi P, Signoroni A. Concept and design of a 3D printed support to assist hand scanning for the realization of customized orthosis. Appl Bionics Biomech. 2017:8171520. doi:10.1155/2017/8171520
Palousek D, Rosicky J, Koutny D, Stoklásek P, Navrat T. Pilot study of the wrist orthosis design process. Rapid Prototyp J. 2014;20(1):27-32. doi:10.1108/RPJ-03-2012-0027
Marinho FD, Dos Santos PM, Nardi SMT, Sime MM, Coutinho GC. Use of 3D printed orthesis and occupational therapeutic treatment in rhizarthrosis. Braz J Occup Ther. 2020;28(4):1151-1164. doi:10.4322/2526-8910.ctoAO2083