INVESTIGATION OF EFFECT ON THE MECHANICAL PROPERTIES OF QUENCHING TEMPERATURE IN AA7075
In this study, effect of quenching temperature on mechanical properties of Aluminum Alloy 7075 (AA7075) are investigated. Several quenching environment is tested oil (20W50), icy water (2 oC), water (25 oC), and hot water (85 oC). Mechanical properties of the materials are measured. X-ray diffraction analyses are also performed for each condition. Results indicated that properties at hot water quenching and oil quenching are found to be similar. It is concluded that oil quenching does not have significant effect on mechanical properties.
___
- [1] J. T. Staley, "History of wrought–aluminium–alloy development," in Aluminium Alloys: Contemporary Research and Applications, Treaties on Materials Science and
Technology, vol. 31, R. D. D. A. K. Vasudevan, Ed. Pennsylvania: Alcoa Technical Center, 2012, pp. 3-31.
- [2] A. K. Vasudevan and R. D. Doherty, Aluminum Alloys-Contemporary Research and Applications: Contemporary Research and Applications. England: Elsevier, 1989.
- [3] C. Mondal and A. K. Mukhopadhyay, "On the nature of T(Al2Mg3Zn3) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy," Materials
Science and Engineering: A, vol. 391, no. 1, pp. 367-376, 2005.
- [4] A. Lalpour, A. Soltanipour, and K. Farmanesh, "Effect of Friction Stir Processing on the Microstructure and Superplasticity of 7075 Aluminum Alloy," in 5th International
Biennial Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM15) Tehran, Iran, 2015, pp. 1-6.
- [5] X.-G. Fan, D.-M. Jiang, Q.-C. Meng, B.-Y. Zhang, and W. Tao, "Evolution of eutectic structures in Al-Zn-Mg-Cu alloys during heat treatment," Transactions of
Nonferrous Metals Society of China, vol. 16, no. 3, pp. 577-581, 2006.
- [6] S. T. Lim, I. S. Eun, and S. W. Nam, "Control of equilibrium phases (M, T, S) in the modified aluminum alloy 7175 for thick forging applications," Materials Transactions,
vol. 44, no. 1, pp. 181-187, 2003.
- [7] B. Binesh and A. K. Mehrdad, "Phase evolution and mechanical behavior of the semi-solid SIMA processed 7075 aluminum alloy," Metals, vol. 6, no. 3, p. 42, 2016.
- [8] D. Ozyürek, R. Yılmaz, and E. Kibar, "The effects of retrogression parameters in RRA treatment on tensile strength of 7075 aluminium alloys," Journal of the Faculty of
Engineering and Architecture of Gazi University, vol. 27, no. 1, pp. 193-203, 2012.
- [9] R. Clark et al., "On the correlation of mechanical and physical properties of 7075-T6 Al alloy," Engineering Failure Analysis, vol. 12, no. 4, pp. 520-526, 2005/08/01/
2005.
- [10] D. Dumont, A. Deschamps, and Y. Brechet, "On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy," Materials Science and
Engineering: A, vol. 356, no. 1, pp. 326-336, 2003/09/15/ 2003.
- [11] A. T. Güner, Effect of quenching temperature on mechanical properties of semi-solid forming aluminum alloys (Institute of Science and Technology). Pamukkale
University, 2013.
- [12] B. Oğuz, Demir dışı metallerin kaynağı (OERLIKON yayını). 1990, pp. 1-23.
- [13] C. Demir, E. B. Mentese, and M. A. Togay, "Alüminyum ısıl işleminde su verme uygulamaları ve kalıntı gerilme etkisi," Componenta doktas, 2017.
- [14] I. Polmear, D. John, J.-F. Nie, and M. Qian, Light alloys: metallurgy of the light metals. Butterworth-Heinemann, 2017.
- [15] S. Kilic and F. Ozturk, "Evaluation of Mathematical Models Performances in XRD Analysis for Determination of Volumetric Ratios of Phases," in 1st International
Mediterranean Science and Engineering Congress (IMSEC), Adana, Turkey, 2016.
- [16] H. Moumenı, S. Alleg, C. Djebbarı, F. Z. Bentayeb, and J. M. Greneche, "Synthesis and characterisation of nanostructured FeCo alloys," Journal of Materials Science,
journal article vol. 39, no. 16, pp. 5441-5443, 2004.
- [17] S. Mehdaoui et al., "Study of the properties of CuInSe2 materials prepared from nanoparticle powder," Materials Characterization, vol. 60, no. 5, pp. 451-455, 5// 2009.
- [18] N. Benslim et al., "XRD and TEM characterizations of the mechanically alloyed CuIn0.5Ga0.5Se2 powders," Journal of Alloys and Compounds, vol. 489, no. 2, pp.
437-440, 1/21/ 2010.
- [19] G. Dini, A. Najafizadeh, S. M. Monir-Vaghefi, and R. Ueji, "Grain size effect on the martensite formation in a high-manganese TWIP steel by the Rietveld method,"
Journal of Materials Science & Technology, vol. 26, no. 2, pp. 181-186, 2010.
- [20] A. E. Karpikhin et al., "Structure of hydroxyapatite powders prepared through dicalcium phosphate dihydrate hydrolysis," Inorganic Materials, journal article vol. 52, no.
2, pp. 170-175, 2016.
- [21] Z. K. Heiba, M. B. Mohamed, and A. M. Wahba, "Effect of Mo substitution on structural and magnetic properties of Zinc ferrite nanoparticles," Journal of Molecular
Structure, vol. 1108, pp. 347-351, 3/15/ 2016.
- [22] http://maud.radiographema.eu/. (2017, January 2017).
- [23] http://profex.doebelin.org/. (2017, January 2017).
- [24] https://www.ill.eu/sites/fullprof/. (2017, January 2017).
- [25] A. Pastor and H. G. Svoboda, "Time-evolution of heat affected zone (HAZ) of friction stir welds of AA7075-T651," Journal of Materials Physics and Chemistry, vol. 1,
no. 4, pp. 58-64, 2013.
- [26] R. H. Oskouei, M. R. Barati, and R. N. Ibrahim, "Surface characterizations of fretting fatigue damage in aluminum alloy 7075-T6 clamped joints: the beneficial role of
Ni–P coatings," Materials, vol. 9, no. 3, p. 141, 2016.