Farklı Seramik Primerleri ve Kumlamanın Rezin Siman ile Zirkonya Arasındaki Bağlanma Dayanımına Etkisi
Amaç: Bu çalışmanın amacı, farklı primerler ve kumlamanın self-adeziv rezin siman ile zirkonya materyali arasındaki makaslama bağlanma dayanımı üzerindeki etkisini araştırmaktır. Gereç ve Yöntemler: Elli adet zirkonya örneği hazırlandı ve sinterlendi. Örnekler uygulanan yüzey işlemine göre rastgele 5 farklı gruba ayrıldı (n=10): Grup N (kontrol; ek yüzey işlemi uygulanmadı), Grup K (örnekler 50 µm Al2O3 partikülleri ile kumlandı), Grup S (örneklere Super-Bond Universal Ceramic Primer uygulandı), Grup M (örneklere Monobond N uygulandı) ve Grup Z (örneklere Z-Prime Plus uygulandı). Daha sonra tüm örneklere 3 mm çapında self-adeziv rezin siman uygulandı. Örnekler, üniversal bir test makinesinde 1 mm/dk'lık hız altında makaslama bağlanma dayanımı testine tabi tutuldu. İstatistiksel analizler tek yönlü ANOVA ve Tukey HSD testleri ile %95 güven aralığında yapıldı. Bulgular: Grupların ortalama bağlanma dayanımı değerleri arasında anlamlı fark bulundu (P<0.001). Grup K, Grup N'den önemli ölçüde daha yüksek bir ortalama bağlanma dayanımı değeri gösterdi (P<0.05); ancak primer gruplarından önemli derecede daha düşük ortalama bağlanma dayanımı değeri gösterdi (P<0.05). Grup S, M ve Z; Grup N ve Grup K'dan istatistiksel olarak daha yüksek ortalama bağlanma dayanımı değerleri gösterdi (P<0.05), ancak primer uygulanan gruplar arasında anlamlı bir fark bulunmadı (P>0.05). Sonuç: Primer yöntemi, kumlama işlemine kıyasla rezin siman ve zirkonya arasındaki bağlanma dayanımını önemli derecede iyileştirmiştir. Farklı primerler, karşılaştırılabilir makaslama bağlanma dayanımı sonuçları göstermiştir.
Anahtar Kelimeler:
Zirkonya, Yüzey İşlemi, Primer, Kumlama, Rezin Siman
Effect of Different Ceramic Primers and Sandblasting on Bond Strength Between Resin Cement and Zirconia
Aim: The purpose of this study was to investigate the effect of different primers and sandblasting on the shear bond strength of the self-adhesive resin cement to zirconia material. Material and methods: Fifty zirconia specimens were prepared and sintered. The specimens were randomly divided into 5 different groups according to the surface treatment applied (n=10): Group N (control; no additional surface treatment applied), Group K (specimens were sandblasted with 50-µm Al2O3 particles), Group S (specimens were treated with Super-Bond Universal Ceramic Primer), Group M (specimens were treated with Monobond N), and Group Z (specimens were treated with Z-Prime Plus). Then, a self-adhesive resin cement was applied to all specimens in 3 mm diameter. The specimens were undergone a shear bond strength test in a universal testing machine at a crosshead speed of 1 mm/min. The statistical analyses were done with one-way ANOVA and Tukey HSD tests at a 95% confidence interval. Results: Significant difference was found among the mean bond strength values of the groups (P<0.001). Group K showed a significantly higher mean bond strength value than Group N (P<0.05), however showed a significantly lower mean bond strength value than the primer groups (P<0.05). Groups S, M, and Z showed significantly higher mean bond strength values than those of Group N and Group S (P<0.05), however, there was no significant difference among the primer applied groups (P>0.05). Conclusion: Primer conditioning method significantly improved the bond strength between the resin cement and zirconia compared to the sandblasting treatment. Different primers demonstrated comparable shear bond strength results.
Keywords:
Zirconia, Surface Conditioning, Primer, Sandblasting, Resin Cement,
___
- 1. Kirmali O, Akin H, Ozdemir AK. Shear bond strength of veneering ceramic to zirconia core after different surface treatments. Photomed Laser Surg. 2013;31:261-8.
- 2. Zhang Y, Lawn BR. Evaluating dental zirconia. Dent Mater. 2019;35:15–23.
- 3. Kwon SM, Min BK, Kim YK, Kwon TY. Influence of Sandblasting Particle Size and Pressure on Resin Bonding Durability to Zirconia: A Residual Stress Study. Materials (Basel). 2020;13.
- 4. Ghoveizi R, Parsirad R, Tavakolizadeh S, Beyabanaki E. Effect of Different Nd:YAG Laser Power Outputs on Bond Strength of Resin Cement to Zirconia in Comparison to Sandblasting. J Lasers Med Sci. 2021;12:e6.
- 5. Paranhos MP, Burnett LH, Jr., Magne P. Effect Of Nd:YAG laser and CO2 laser treatment on the resin bond strength to zirconia ceramic. Quintessence Int. 2011;42:79-89.
- 6. Yue X, Hou X, Gao J, Bao P, Shen J. Effects of MDP-based primers on shear bond strength between resin cement and zirconia. Exp Ther Med. 2019;17:3564-72.
- 7. Al-Akhali M, Al-Dobaei E, Wille S, Mourshed B, Kern M. Influence of elapsed time between airborne-particle abrasion and bonding to zirconia bond strength. Dent Mater. 2021;37:516-22.
- 8. Lumkemann N, Eichberger M, Stawarczyk B. Different surface modifications combined with universal adhesives: the impact on the bonding properties of zirconia to composite resin cement. Clin Oral Investig. 2019;23:3941-50.
- 9. Scaminaci Russo D, Cinelli F, Sarti C, Giachetti L. Adhesion to zirconia: a systematic review of current conditioning methods and bonding materials. Dent J (Basel). 2019;7.
- 10. Chintapalli RK, Marro FG, Jimenez-Pique E, Anglada M. Phase transformation and subsurface damage in 3Y-TZP after sandblasting. Dent Mater. 2013;29:566-72.
- 11. Chen L, Suh BI. Bonding of resin materials to all-ceramics: A review. Curr Res Dent. 2012;3:7-17.
- 12. Cura C, Özcan M, Isik G, Saracoglu A. Comparison of alternative adhesive cementation concepts for zirconia ceramic: glaze layer vs zirconia primer. J Adhes Dent. 2012;14:75.
- 13. Azimian F, Klosa K, Kern M. Evaluation of a new universal primer for ceramics and alloys. J Adhes Dent. 2012;14:275.
- 14. Koizumi H, Nakayama D, Komine F, Blatz MB, Matsumura H. Bonding of resin-based luting cements to zirconia with and without the use of ceramic priming agents. J Adhes Dent. 2012;14:385.
- 15. Attia A, Kern M. Long-term resin bonding to zirconia ceramic with a new universal primer. J Prosthet Dent. 2011;106:319-27.
- 16. Pecanha MM, Amaral M, Baroudi K, Frizzera F, Vitti R, Silva-Concilio L. Improving the bonding stability between resin cements and zirconia-based ceramic using different surface treatments. Int J Prosthodont. 26 Şubat 2021.
- 17. Pilo R, Dimitriadi M, Palaghia A, Eliades G. Effect of tribochemical treatments and silane reactivity on resin bonding to zirconia. Dent Mater. 2018;34:306-16.
- 18. Asar NV, Çakırbay M. Zirkonya-rezin siman bağlantısını güçlendirmede kullanılan yüzey işlemleri. Acta Odontol Tur. 2013;30:162-8.
- 19. Elsaka SE. Influence of Surface Treatments on the Bond Strength of Resin Cements to Monolithic Zirconia. J Adhes Dent. 2016;18:387-95.
- 20. Salem R, Naggar GE, Aboushelib M, Selim D. Microtensile Bond Strength of Resin-bonded Hightranslucency Zirconia Using Different Surface Treatments. J Adhes Dent. 2016;18:191-6.
- 21. Kern M, Barloi A, Yang B. Surface conditioning influences zirconia ceramic bonding. J Dent Res. 2009;88:817-22.
- 22. Yang L, Chen B, Meng H, Zhang H, He F, Xie H, et al. Bond durability when applying phosphate ester monomer-containing primers vs. self-adhesive resin cements to zirconia: Evaluation after different aging conditions. J Prosthodont Res. 2020;64:193-201.
- 23. Chintapalli RK, Mestra Rodriguez A, Garcia Marro F, Anglada M. Effect of sandblasting and residual stress on strength of zirconia for restorative dentistry applications. J Mech Behav Biomed Mater. 2014;29:126-37.
- 24. Chintapalli RK, Marro FG, Jimenez-Pique E, Anglada M. Phase transformation and subsurface damage in 3Y-TZP after sandblasting. Dent Mater. 2013;29:566-72.
- 25. Kitayama S, Nikaido T, Takahashi R, Zhu L, Ikeda M, Foxton RM, et al. Effect of primer treatment on bonding of resin cements to zirconia ceramic. Dent Mater. 2010;26:426-32.
- 26. Chen L, Suh BI, Brown D, Chen X. Bonding of primed zirconia ceramics: evidence of chemical bonding and improved bond strengths. Am J Dent. 2012;25:103-8.
- 27. Yang B, Barloi A, Kern M. Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dent Mater. 2010;26:44-50.
- 28. Çağlar İ, Ateş SM, Korkmaz FM, Yeşil Duymuş Z. Effect of various surface pretreatments on monolithic zirconia-resin cement bonding. Yeditepe J Dent. 2018;14:105-10.
- 29. Petrauskas A, Novaes Olivieri KA, Pupo YM, Berger G, Gonçalves Betiol E. Influence of different resin cements and surface treatments on microshear bond strength of zirconia-based ceramics. J Conserv Dent. 2018;21:198-204.
- 30. Chen L, Yang J, Wang JR, Suh BI. Physical and biological properties of a newly developed calcium silicate-based self-adhesive cement. Am J Dent. 2018;31:86-90.
- 31. Tsuo Y, Yoshida K, Atsuta M. Effects of alumina-blasting and adhesive primers on bonding between resin luting agent and zirconia ceramics. Dent Mater J. 2006;25:669-74.
- Yayın Aralığı: Yılda 3 Sayı
- Başlangıç: 2019
- Yayıncı: Necmettin Erbakan Üniversitesi
Sayıdaki Diğer Makaleler
Beyazlatıcı Etkili Diş Macunlarının Renklendirilmiş Kompozit Materyalindeki Renk Değişimine Etkisi
Hakan Yasin GÖNDER, İrem ELMACI, Hilal KARAKÖY
İdiyopatik Osteosklerozis Bruksizm ile İlişkili Midir? Kliniko-Radyolojik Değerlendirme
Tuba YILMAZ SAVAŞ, Simel KARACA, Ceyda AKIN, Ozgur INAN