ZEYTİN PİRİNASI/POLYESTER KOMPOZİTİN BASMA YÜKÜ ALTINDAKİ MEKANİK ÖZELLİKLERİNİN BELİRLENMESİ

Kompozit malzemelerde genellikle cam elyaf veya karbondan yapılmış fiberler kullanılmaktadır. Bunlar üretimi zor, pahalı ve doğa dostu olmayan malzemelerdir. Kompozit malzemelerde doğada bolca bulunan, ucuz ve zehirli olmayan güçlendirici malzemelerin kullanılması bu noktada önem kazanmaktadır. Bu çalışmanın amacı, ülkemizde bol olarak bulunan ve zeytin sıkma işleminden sonra arta kalan zeytin pirinasının polyester matrisli kompozitlerde kullanımının araştırılmasıdır. Çalışmanın ilk kısmında, zeytin çekirdeği parçaları hiçbir kimyasal işleme tabi tutulmadan ve öğütülmeden parçacık olarak kullanılmış, böylece pirinanın primitif kullanımının kompozit malzemenin mekanik değerlerine olan etkisinin etüdü yapılmıştır. Çalışma kapsamında, %30, %40, %50 ve %60 zeytin çekirdeği oranına sahip silindirik şekilli kompozit malzemeler üretilmiştir. Basma deneyleri 0.001 s-1 gerinim hızında gerçekleştirilmiştir. Kompozit ve saf polyester malzemelerinin gerilme-gerinim eğrileri, elastik modülleri, akma gerilmesi ve yoğunlaşma gerinim değerleri karşılaştırılmıştır. Çalışma sonunda, polyester içindeki zeytin çekirdeği oranının artması ile elastik modülün ve akma gerilmesinin azaldığı, yoğunlaşma geriniminin ise arttığı görülmüştür.
Anahtar Kelimeler:

Kompozit, zeytin, pirina, basma

DETERMINATION OF MECHANICAL PROPERTIES OF OLIVE RESIDUE/ POLYESTER COMPOSITE UNDER COMPRESSIVE LOADING

E-glass/carbon fibers or hard particles like ceramics were generally used as reinforcement in composite materials. These materials are hard to manufacture, expensive and not environmentally friendly. In this point, it is crucial to use cheap and non-toxic reinforcement materials. The aim of this study is to investigate potential use of olive nut particles in polyester matrix composites. In the presented part of the research, olive nut particles were not subjected to any chemical treatment and not grinded, therefore the primitive usage of olive nut particles on the mechanical properties of composite material was investigated. In this scope, cylindrical composites with olive nut content of 30%, 40%, 50% and 60% were prepared. Compression tests were conducted at strain rate of 0.001 s-1. Stress-strain curves, elastic modulus, yield stress and densification strain of composites and pure polyester were then compared. Elastic modulus and yield stress were seen to decrease while densification strain increased with increasing content of olive nuts in the composites.

___

  • 1. Akgun, N. A., Doymaz, I. 2005. "Modelling of Olive Cake Thin-Layer Drying Process," Journal of Food Engineering, vol. 68, p. 455-461.
  • 2. Öztürk, F., Yalçın, M., Dıraman, H. 2009. "Türkiye Zeytinyağı Ekonomisine Genel Bir Bakış," Gıda Teknolojileri Elektronik Dergisi, vol. 4, p. 35-51.
  • 3. Naghmouchi, I., Mutjé, P., Boufi, S. 2014. "Polyvinyl Chloride Composites Filled with Olive Stone Flour: Mechanical, Thermal, and Water Absorption Properties," Journal of Applied Polymer Science, vol. 131.
  • 4. Monteiro, S., Lopes, F., Ferreira, A., Nascimento, D. 2009. "Natural-Fiber Polymer-Matrix Composites: Cheaper, Tougher, and Environmentally Friendly," JOM, vol. 61, p. 17-22.
  • 5. Bledzki, A. K., Gassan, J. 1999. "Composites Reinforced with Cellulose Based Fibres," Progress in Polymer Science, vol. 24, p. 221-274.
  • 6. Djidjelli, H., Benachour, D., Boukerrou, A., Zefouni, O., Martinez-Véga, J., Farenc, J., Kaci, M. 2007. "Thermal, Dielectric and Mechanical Study of Poly(vinyl Chloride)/Olive Pomace Composites," EXPRESS Polymer Letters, vol. 1, p. 846-852.
  • 7. Mousa, A., Heinrich, G. 2010. "Thermoplastic Composites Based on Renewable Natural Resources: Unplasticized PVC/ Olive Husk," International Journal of Polymeric Materials, vol. 59, p. 843-853.
  • 8. Ihamouchen, C., Djidjelli, H., Boukerrou, A., Krim, S., Kaci, M., Martinez, J. J. 2012. "Effect of Surface Treatment on the Physicomechanical and Thermal Properties of HighDensity Polyethylene/Olive Husk Flour Composites," Journal of Applied Polymer Science, vol. 123, p. 1310-1319.
  • 9. Gharbi, A., Hassen, R. B., Boufi, S. 2014. "Composite Materials from Unsaturated Polyester Resin and Olive Nuts Residue: The Effect of Silane Treatment," Industrial Crops and Products, vol. 62, p. 491-498.