Alim FİLİK, Rüstem Barış YEŞİLAY

3316

COVID-19 ile İvmelenen Dijitalleşmenin PLM’e Etkileri

Çalışma kapsamında COVID-19 salgını ile birlikte hız kazanan dijitalleşme trendinin, Ürün Yaşam Döngüsü Yönetimi (PLM) ile olan potansiyel etkileşimi araştırılmıştır. Konuya dair literatür taraması yapılmış, bu kapsamdaki araştırmalar incelenmiş ve neticesinde COVID-19 ile birlikte başlayan süreç içerisinde dijitalleşmenin kuruluşlar için artık kaçınılmaz olduğu ve dijitalleşmenin PLM ile anlamlı olacağına dair bulgular elde edilmiştir. PLM’in ürün yaşam döngüsü fazları açıklanarak, her fazda dijitalleşmenin etkileri açıklanmıştır. Dijitalleşme, dijital ikiz kavramı ve uygulamalarına değinilmiş ve ürün yaşam döngüsünde etkilediği aşamalar açıklanmıştır. Daha sonra, PLM ve dijitalleşme ilişkisinden bahsedilerek, dijitalleşmenin ürün başlangıcı (BOL), ürün ortası (MOL) ve ürün sonu (EOL) aşamalarında olan etkileri açıklanmıştır. Neticede, anlamlı bir dijitalleşmenin PLM ile mümkün olacağı ve dijitalleşme ile PLM’in birbirini tamamlayan kavramlar olduğundan hareketle, COVID – 19 ile başlayan sürecin PLM konseptinin yaygınlaşmasına ve farkındalığının artmasına katkı sağlayacağını ifade etmek mümkündür.
Anahtar Kelimeler:

Dijitalleşme, COVID-19, dijital ikiz

The Impact of Digitalization Accelerated by COVID-19 on PLM

Within the scope of the study, the potential interaction of the digitalization trend, which accelerated with the COVID-19 epidemic, with Product Life Cycle Management (PLM) was investigated. The literature on the subject has been reviewed, the researches within this scope have been examined and as a result within the process that started with COVID-19, it was found that digitization is now inevitable for organizations and that digitalization will be meaningful with PLM. By explaining the product life cycle phases of PLM, the effects of digitalization in each phase have been explained. Digitalization, the concept of digital twin and its applications are mentioned and the stages it affects in the product life cycle are explained. Then, by mentioning the relationship between PLM and digitalization, the effects of digitalization on the beginning of product (BOL), mid-product (MOL) and end-of-product (EOL) stages are explained. As a result, it is possible to state that a meaningful digitalization will be possible with PLM and that the process starting with COVID - 19 will contribute to the spread of the PLM concept and to increase awareness, since digitalization and PLM are concepts that complement each other.
Keywords:

Digitalization, COVID-19, digital twin,

PDF

___

  • Gartner, 2016. “Gartner IT Glossary, “https://www.gartner.com/en/information technology/glossary/ digitalization, son erişim tarihi: 09.09.2020.
  • Herterich, M. M., Uebernickel, F., & Brenner, W. 2015. “The Impact of Cyber-Physical Systems on Industrial Services in Manufacturing, Procedia Cirp, 30, p. 323-328, doi: 10.1016/j.procir.2015.02.110.
  • Figay, N., Ghodous, P., Khalfallah, M., Barhamgi, M. 2012. Interoperability Framework for Dynamic Manufacturing Networks. Computers in Industry, 63(8), pp.749-755, doi: 10.1016/j.compind.2012.08.008.
  • Parviainen, P., Tihinen, M., Kääriäinen, J., Teppola, S. 2017. “Tackling the Digitalization Challenge: How to Benefit from Digitalization in Practice, “International Journal of Information Systems and Project Management., vol.5., p.63-77, doi: 10.12821/ijispm.
  • Golovatchev, J.D., Budde, O. 2007. June. Next Generation PLM-an integrated approach for the Product Lifecycle Management. In Dans Proceedings of ICCPR2007: International Conference on Comprehensive Product Realization 2007. Proceedings of ICCPR2007: International Conference on Comprehensive Product Realization.
  • Terzi, S., Bouras, A., Dutta, D., Garetti, M., Kiritsis, D. 2010. “Product lifecycle management - From its history to its new role, “International Journal of Product Lifecycle Management, vol.4, p.360-389, doi: 10.1504/IJPLM.2010.036489.
  • Xin, Y., Ojanen, V. 2017. “The Impact of Digitalization on Product Lifecycle Management: How to Deal with it?, “IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 10-13 Aralık 2017, Singapore, doi: 10.1109/IEEM.2017.8290062.
  • McKinsey. 2020. “COVID-19 US Digital Sentiment Survey, “https://www.mckinsey.com/business-function-s/marketing-and-sales/our-insights/survey-us-consumer-sentiment-during-the-coronavirus-crisis, son erişim tarihi: 09.09.2020.
  • Deloitte. 2020. “Küresel COVID-19 Salgınının Türkiye’de Farklı Kategorilere Etkileri, “ https://www2.deloitte.com/tr/tr/pages/consulting/articles/kuresel-covid-19-salgininin-turkiyedefarklikategorilereetkileri.html, son erişim tarihi: 09.09.2020.
  • Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., Sui, F. 2018. “Digital Twin-driven product design, manufacturing and service with big data , “The International Journal of Advanced Manufacturing Tech¬nology, vol. 94, p. 3563–3576, doi: 10.1007/s00170-017-0233-1.
  • Baig, A., Hall, B., Jenkins P., Lamarre, E., McCarthy, B. 2020. “The COVID-19 Recovery Will be Digital: A Plan for the First 90 days, “https://www.mckinsey.com/business-functions/mckinsey-digital/our-insights/the-covid-19-recovery-will-be-digital-a-plan-for-the-first-90-days, son erişim tarihi: 16.06.2020.
  • Lundin, N. 2020. “Covid-19 and digital transformation - What do we see now and what will we see soon?, “https://sweden-science-innovation.blog/beijing/covid-19-and-digital-transformation-what-do-we-see-now-and-what-will-we-see-soon, son erişim tarihi: 09.09.2020
  • Grant J. 2019. “Where Does PLM Fit in Digital Transformation?, https://www.designnews.com/ automation-motion-control/where-does-plm-fit-digital-transformation, son erişim tarihi: 09.09.2020.
  • Hess, T., Matt, C., Benlian, A., Wiesböck, F. 2016. “Options for Formulating a Digital Transformation Strategy, “MIS Quarterly Executive, vol.15, p.123-139, doi: 10.4324/9780429286797-7.
  • Grieves, M. 2014. “Digital twin: manufacturing excellence through virtual factory replication, “http://www.apriso.com/library, son erişim tarihi: 09.09.2020.
  • Bolton, R. N., McColl, K., Janet, R., Cheung, L., Gallan, A., Orsingher, C., Witell, L., Zaki, M. 2018. “Customer experience challenges: Bringing together digital, physical and social realms, “Journal of Service Management, vol.29, no. 5, p. 776–808.
  • Tuegel, E., Ingraffea, A.R., Eason, T.G. 2011. “Reengineering aircraft structural life prediction using a digital twin, “International Journal of Aerospace Engineering.,vol.11, p. 1-14, doi: 10.1155/2011/154798.
  • Smarslok, B., Culler, A., Mahadevan, S. 2012. “Error quantification and confidence assessment of aerothermal model predictions for hypersonic aircraft. “53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 23-26 Nisan 2012, Honolulu, Hawaii, doi: 10.2514/6.2012-1817.
  • Cerrone, A., Hochhalter, J., Heber, G. ve Ingraffea, A. 2014. “On the Effects of Modeling as-manufactured Geometry: Toward Ddigital Twin, “International Journal of Aerospace Engineering, DOI: 10.1155/2014/439278.
  • Mussomeli,A., Meeker, B., Shepley, S., Schatsky, D. 2018. “https://www2.deloitte.com/us/en/insights/focus/ signals-for-strategists/understanding-digital-twin echnology.html, son erişim tarihi: 09.09.2020.
  • Boschert, S., Rosen, R. 2016. “Digital Twin-the Simulation aspect, Mechatronic Futures, Springer International Publishing, Switzerland, doi: 10.1007/978-3-319-32156-1_5.
  • Glaessgen, E., Stargel, D. 2012. “The digital twin paradigm for future NASA and US Air Force vehicles, “53rd AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 Nisan 2012, Honolulu,Hawaii.
  • Tao, F., Bi, L.N., Zuo Y., Nee, A.Y.C. 2016. “A Hybrid Group Leader Algorithm for Green Material Selection with Energy Consideration in Product Design, “CIRP Annals - Manufacturing Technology, vol.65, p. 9–12, doi: 10.1016/j.cirp.2016.04.086.
  • Qi, Q., Tao, F., Hu, T., Anwer, N., Liu, A., Wei, Y., Wang, L., Nee, A. 2019. “Enabling Technologies and Tools for Digital Twin, “Journal of Manufacturing Systems, 2019, p 1-19, doi: 10.1016/j.jmsy.2019.10.001.
  • Ötleş, S., Üçok, B. 2018. “Kapalı Döngü - Ürün Yaşam Döngüsü Yönetimi, “Plastik ve Ambalaj Teknolojisi Dergisi, s. 45-54.
  • Smartsheet. 2020. “The New Product Development Process and Product Life Cycle Management, “https://www.smartsheet.com/product-life-cycle-management, son erişim tarihi: 09.09.2020.
  • Li, J., Tao, F., Cheng, Y., Zhao, L. 2015. “Big Data in Product Lifecycle Management”, “The International Journal of Advanced Manufacturing Technology”, 81(1–4), 667–684, doi: 10.1007/s00170-015-7151-x.
  • Kiritsis, D. 2013. “Semantic Technologies for Engineering Asset Life Cycle Management, “International Journal of Production Research”, vol.51, p. 7345-7371, doi: 10.1080/00207543.2012.761364.
  • Kuo, C.F., Wang, M.J. 2012. “Motion Generation and Virtual Simulation in a Digital Environment, “International Journal of Production Research, vol. 50, no. 22, p. 6519-6529, doi: 10.1080/00207543.2011. 653698.
  • Affonso R.C., Cheutet V., Ayadi M., and Haddar M. 2013. “Simulation in product lifecycle: Towards a better information management for design projects, “Journal of Modern Project Management, vol. 1, no. 1, p. 113-119.
  • Tao, F., Wang, Y., Zuo, Y., Yang, H., Zhang, M. 2016. “Internet of Things in Product Life-Cycle Energy Management, “Journal of Industrial Information Integration, doi: 10.1016/j.jii.2016.03.001.
  • Roy, R., Stark, R., Tracht, K., Takata, S., Mori, M. 2016. “Continuous Maintenance and the Future – Foundations and Technological Challenges, CIRP Annals - Manufacturing Technology, vol. 65, p.667-688.
  • Främling, K., Holmström, J., Loukkola, J., Nyman, J., Kaustell, A. 2013. “Sustainable PLM through Intelligent Products, “Engineering Applications of Artificial Intelligence, vol. 26. p. 789–799, doi: 10.1016/ j.engappai.2012.08.012.
  • Chen, S., Yi, J., Zhu, X., Jiang, H., Ju, W. 2017. “RFID-based Integrated Method for Electromechanical products disassembly decision-making, “International Journal of Computer Integrated Manufacturing, vol. 30, no. 2-3, p. 229-254, doi: 10.1080/0951192X.2016.1145807
  • Ellenrieder, S. 2017. “No meaningful Digitalization Without PLM, “https://www.plmportal.org/en/no-mea-ningful-digitalization-without-plm.html, son erişim tarihi:09.09.2020.
Mühendis ve Makina-Cover
  • ISSN: 1300-3402
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1957
  • Yayıncı: TMMOB MAKİNA MÜHENDİSLERİ ODASI
Arşiv
Sayıdaki Diğer Makaleler

COVID-19 ile İvmelenen Dijitalleşmenin PLM’e Etkileri

Alim FİLİK, Rüstem Barış YEŞİLAY

Havacılıkta Organizasyonel Kazalar: B-737 Max Uçak Kazalarının Mühendislik Perspektifinden İncelenmesi

Tamer SARAÇYAKUPOĞLU

Hidrolik Yüksek Basınç Hattı Filtre Gövdesinin Tasarımı, Optimizasyonu, Üretimi ve Test Edilmesi

Samet TEKELİOĞLU, Safa ELDEK, Hüseyin, Ayfer SARIGÜL, Şeyma AYHAN, ALİ KAHRAMAN, MURAT DİLMEÇ

Fotovoltaik (PV) Pompa Sisteminin Bileşenlerinin Hesabı

Ahmet, F. Mertkan ARSLAN, Hüseyin GÜNERHAN

Rüzgar Türbinlerinde İşletme ve Bakım

Harun Kemal ÖZTÜRK