___

• Barker, J.S., 1964. A Laboratory Investigation of Rock Cutting Using Large Picks. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1, 519–534.
• Bilgin, N., 1989. İnşaat ve Maden Mühendisleri İçin Uygulamalı Kazı Mekaniği, Birsen Yayınevi, Istanbul, 192 s.
• Bilgin, N., Demircin, M.A., Çopur, H., Balcı, C., Tunçdemir, H., Akçin, N., 2006. Dominant Rock Properties Affecting the Performance of Conical Picks and the Comparison of Some Experimental and Theoretical Results, International Journal of Rock Mechanics and Mining Science, 43, 1, 139–156.
• Bilgin, N., Copur, H., Balci, C., 2014. Mechanical Excavation in Mining and Civil Industries, CRC Press, 366 s.
• Evans, I., 1958. Theoretical Aspects of Coal Ploughing, Mechanical Properties of Non-Metallic Brittle Materials, W.H. Walton, Ed., Butterworths, London, 451–468.
• Evans, I., 1965. The Force Required to Cut Coal with Blunt Wedges. International Journal of Rock Mechanics and Mining Science & Geomechanics Abstracts, 2, 1–12.
• Göktan, R.M., 1990. Effect of Cutter Pick Rake Angle on the Failure Pattern of High-Strength Rocks, Mining Science and Technology, 11, 281–285.
• ISRM, 1981. Rock Caharacterization, Testing and Monitoring: ISRM suggested Methods. E.T. Brown, Ed., Pergamon Press, 211 s. Mellor, M., 1977. Mechanics of Cutting and Borin: Part IV: Dynamics and Energetics of Parallel Motion Tools, CRREL Report 77-7, 96 s.
• Menezes, P.L., Lovell, M.R, Avdeev, I.V., Lin, J.S., Higgs III, C.F., 2014. Studies on the Formation of Discontinuous Chips During Rock Cutting Using an Explicit Finite Element Model, International Journal of Advanced Manufacturing Technology, 70, 635-648.
• Nishimatsu, Y., 1972. The Mechanics of Rock Cutting, International Journal of Rock Mechanics and Mining Science, 9, 261-270.
• Nishimatsu, Y., 1993. Theories of Rock Cutting, Comprehensive Rock Engineering, J.A. Hudson, Ed., Oxford, Pergamon Press, 647-662.
• Perras, M.A. ve Diederichs, M.S., 2014. A Review of the Tensile Strength of Rock: Concepts and Testing, Geotechnical and Geological Engineering, 32, 525-546.
• Rostami, J., Ozdemir, L., Nilson, B., 1996. Comparison between CSM and NTH hard rock TBM performance prediction models. In Proceeding of the Annual Conference the Institution of Shaft Drilling Technology, Las Vegas, pp. 1
• Roxborough, F.F., 1973. The Cutting Rock with Picks, Mining Engineer, June, 445-454.
• Yaşar, S., 2017. Kayaç kesilebilirliğinin tayini için düşey kayaç kesme setinin geliştirilmesi, Doktora Tezi, Karadeniz Teknik Üniversitesi.
• Yaşar, S. ve Yılmaz, A.O., 2017a. A Novel Mobile Testing Equipment for Rock Cuttability Assessment: Vertical Rock Cutting Rig (VRCR), Rock Mechanics and Rock Engineering, 50, 857-869.
• Yaşar, S. ve Yılmaz, A.O., 2017b. Vertical rock cutting rig (VRCR) suggested for performance prediction of roadheaders, International Journal of Mining, Reclamation and Environment, DOI: 10.1080/17480930.2017.1363482.
• Yaşar, S. ve Yılmaz, A.O., 2017c. Rock Cutting Tests with a Simple-Shaped Chisel Pick to Provide Some Useful Data, Rock Mechanics and Rock Engineering, DOI: 10.1007/s00603-017-1303-2.
• Wang, X., Liang, Y., Wang, Q., Zhang, Z., 2017. Empirical Models for Tool Forces Prediction of Drag-Typed Picks Based on Principal Component Regression and Ridge Regression Methods, Tunnelling and Underground Space Technology, 62, 75-92.