___

• Aksoy, C.O., Komurlu, E., 2017. Temel Kaya Mekaniği, Temel Madencilik Bilgileri e-kitabı, Mayeb, Ankara, pp. 1-69, ISBN: 978-605-64724-1-1
• Amadei, B., Stephansson O., 1997. Rock Stress and Its Measurements, Chapman&Hall, London.
• Aydan, Ö., Kawamoto, T., 2000. Assessing mechanical properties of rock masses by RMR rock classification method, Proceedings of the GeoEng 2000 Symposium, Melbourne, Australia, 19–24.
• Barla, G., Debernardi, D., Perinoi A., 2015. Lessons learned from deep-seated landslides activated by tunnel excavation. Geomechanics and Tunnelling, vol. 8, 394-401.
• Bieniawski, Z.T., 1989. Engineering Rock Mass Classifications, Mc Graw Hill; John Willey and Sons, Newyork, 237 pp.
• Brady, B.H.G., Brown, E.T., 2005. Rock Mechanics for Underground Mining, Kluwer Academic Publishers, Dordrecht.
• Gercek, H., 2007. Poisson’s ratio values for rocks, International Journal of Rock Mechanics & Mining Sciences, vol. 44(1), 1–13.
• Hoek E., 1998. Reliability of Hoek-Brown estimates of rock mass properties and their impact on design, International Journal of Rock Mechanics & Mining Sciences, vol. 35(I), 63-68.
• Hoek, E., 2001. Big Tunnels in Bad Rock. Journal of Geotechnical and Geoenvironmental Engineering, vol. 127(9): 726-740.
• Hoek, E., 2006. Kaya Mühendisliği (Turkish translation by Karakus&Basarir), Publication of Chambers of Mining Engineers of Turkey, Ankara, Turkey
• Huang, X., Zhang, J., Yang, L., Yang, S., Wang, X., 2016. Elastoplastic analysis of the surrounding rock mass in circular tunnel based on the generalized nonlinear unified strength theory, International Journal of Mining Science and Technology, vol. 26 (5), 819–823.
• Jianjun, W., Binsong, J., Qiang, Z., 2011. Elastic-Plastic-Brittle Unified Solution of Surrounding Rocks in Deep Openings, Procedia Engineering, vol. 26, 1225 – 1233.
• Karaman, K., Cihangir, F., Kesimal, A., 2015. A comparative assessment of rock mass deformation modulus, International Journal of Mining Science and Technology, vol. 25, 735–740.
• Kolymbas, D., 2005. Tunnelling and Tunnel Mechanics, Springer, Germany
• Komurlu, E., 2012. Effects of Rock and Granular Material Horizontal Stresses on Support Design. MSc Thesis, Karadeniz Technical University, Trabzon, Turkey, 2012 (In Turkish)
• Komurlu, E., Kesimal A., 2013. New Support Materials for Forepoling and Umbrella Applications (in Turkish). 3rd International Symposium and Exhibition on Underground Excavations for Transportation. 29-30 November, İstanbul/Turkey, pp. 423-435.
• Komurlu, E., Kesimal, A., 2017. Usability of Thin Spray-on Liners (TSL) for Akarsen Underground Mine in Murgul (in Turkish). MT Bilimsel, Journal of Underground Resources, vol. 12, 3-25.
• Komurlu E, Kesimal A., Hasanpour, R., 2015. In situ horizontal stress effect on plastic zone around circular underground openings excavated in elastic zones. Geomechanics and Engineering, vol. 8, 783-799.
• Konietzky, H., 2018. Simple analytical solutions for underground circular and elliptical openings, Introduction into Geomechanics (E-book), Editor: H. Konietzky, TU Bergakademie Freiberg
• Li, P., Fang, Q., Zhang, D., 2014. Analytical solutions of stresses and displacements for deep circular tunnels with liners in saturated ground, Journal of Zhejiang University-Science A (Applied Physics and Engineering), vol. 15(6), 395-404.
• Stacey, T.R., 2016. Addressing the consequences of dynamic rock failure in underground excavations, Rock Mechanics and Rock Engineering, vol. 49, 4091–4101.
• Shi, H., Bai, M., 2017. Plastic Zone Analysis of Deep-Buried, Noncircular Tunnel and Application on the High-Speed Railway in the Karst Area, Mathematical Problems in Engineering, vol. 2017, Article ID 9523267
• Shi, P., Zhang, D., Pan, J., Liu, W., 2016. Geological Investigation and Tunnel Excavation Aspects of the Weakness Zones of Xiang’an Subsea Tunnels in China, Rock Mechanics and Rock Engineering, vol. 49, 4853–4867.
• Stephansson, O., Zang, A., 2012. ISRM Suggested Methods for Rock Stress Estimation-Part 5: Establishing a Model for the In Situ Stress at a Given Site, Rock Mechanics and Rock Engineering, 45, 955-969.
• Rehman, H., Ali, W., Naji, A.M., Kim, J.J., Abdullah, R.A., Yoo, H.K., 2018. Review of Rock- Mass Rating and Tunneling Quality Index Systems for Tunnel Design: Development, Refinement, Application and Limitation, Apllied Sciences, 8, paper no: 1250
• Yan, L., Shihao, T.U., 2010. Rules of distribution in a plastic zone of rocks surrounding a roadway affected by tectonic stress, International Journal of Mining Science and Technology, vol. 20, 47–52.
• Yaralı, O., Muftuoglu, V.Y., 1992. Support design for rock bolts with numerical methods, Proceedings of 8th coal congress of Turkey, Zonguldak, pp. 279-290.
• Zareifard, M.R., Fahimifar, A., 2012. A new solution for shallow and deep tunnels by considering the gravitational loads, Acta Geotechnica Slovenica, vol. 9(2) 37-49.
• Zhu, C.Q., Yin, Z.Q., Li, C.M., Feng, R.M., 2016. Elastoplastic Analysis of Tunnel Surrounding Rocks based on the Statistical Damage Constitutive Model, Journal of Engineering Science and Technology Review, vol. 9 (3), 27-34.
• Zhu, M.Z., Yang, Y., Gao, F., Liu, J., 2018. Analytical Solution of Tunnel Surrounding Rock for Stress and Displacement Based on Lade–Duncan Criterion, Advances in Civil Engineering, vol. 2018, Article ID 5363658.