Renk Seçiminin Rezin Simanın Renk Stabilitesi Üzerine Etkisi

Amaç: Bu çalışmanın amacı; renk seçiminin rezin simanın renk stabilitesi üzerindeki

The Effect of Color Selection on the Color Stability of the Resin Cement

Objective: The aim of this study was to determine effect of shade selection on resin cement's color stability. MaterialsandMethods:Ten resin cement samples in dimensions of 10 mm diameter and 2 mm thickness for each group [group 1: Translucent base and translucent catalyst, group 2: Bleach XL (B1) base and yellow (A3) catalyst, group 3: White (A1) base and A3 catalyst] totally 30 samples were prepared. Color coordinates of each sample were recorded after polymerization and 5000 thermal cycles. Color variation (?E) was calculated for each sample and statistical analyses were performed. Results: The lowest ?E values were obtained for group 1. Group 2 showed higher ?E values than group 3 however there were no statistical difference. Conclusion: Translucent base and translucent catalyst mixture showed clinically acceptable color stability while B1 base and A3 catalyst and A1 base and A3 catalyst mixtures did not show clinically acceptable color stability. Shade of the resin cement partially effected its color stability.

PDF

___

1. Samra AP, Ribeiro DG, Borges CP, Kossatz S. Influence of professional prophylaxis on reducing discoloration of different aesthetic restorative materials. J Dent 2012; 40(Suppl 2): 71-6.
2. Uchida H, Vaidyanathan J, Viswanadhan T, Vaidyanathan TK. Color stability of dental composites as a function of shade. J Prosthet Dent 1998; 79: 372-7.
3. Dede DÖ, Ceylan G, Yilmaz B. Effect of brand and shade of resin cements on the final color of lithium disilicate ceramic. J Prosthet Dent 2017; 117: 539-44.
4. Silami FD, Tonani R, Alandia-Román CC, Pires-de-Souza F de C. Influence of different types of resin luting agents on color stability of ceramic laminate veneers subjected to accelerated artificial aging. Braz Dent J 2016; 27: 95-100.
5. Chen XD, Hong G, Xing WZ, Wang YN. The influence of resin cements on the final color of ceramic veneers. J Prosthodont Res 2015; 59: 172-7.
6. Furuse AY, Santana LO, Rizzante FA, Ishikiriama SK, Bombonatti JF, Correr GM, et al. Delayed light activation improves color stability of dual-cured resin cements. J Prosthodont 2016; DOI:10.1111/ jopr.12509.
7. Almeida JR, Schmitt GU, Kaizer MR, Boscato N, Moraes RR. Resin-based luting agents and color stability of bonded ceramic veneers. J Prosthet Dent 2015; 114: 272-7.
8. Archegas LR, Freire A, Vieira S, Caldas DB, Souza EM. Colour stability and opacity of resin cements and flowable composites for ceramic veneer luting after accelerated ageing. J Dent 2011; 39: 804-10.
9. Iskander M, Elkassas D, Mohsen M. Effect of two matrix metalloproteinase inhibitors on the color stability of a nanofilled resin composite. Oper Dent 2015; 40: 11-20.
10. Bezgin T, Ozer L, Tulga Öz F, Özkan P. Effect of toothbrushing on color changes of esthetic restorative materials. J Esthet Restor Dent 2015; 27(Suppl 1): 65-73.
11. Catelan A, Briso AL, Sundfeld RH, Goiato MC, Dos Santos PH. Color stability of sealed composite resin restorative materials after ultraviolet artificial aging and immersion in staining solutions. J Prosthet Dent 2011; 105: 236-41.
12. Chaiyabutr Y, Kois JC, Lebeau D, Nunokawa G. Effect of abutment tooth color, cement color, and ceramic thickness on the resulting optical color of a CAD/CAM glass ceramic lithium disilicatereinforced crown. J Prosthet Dent 2011; 105: 83-90.
13. Turgut S, Bagis B. Effect of resin cement and ceramic thickness on final color of laminate veneers: An in vitro study. J Prosthet Dent 2013; 109: 179-86.
14. Karaokutan I, Yilmaz Savas T, Aykent F, Ozdere E. Color Stability of CAD/CAM Fabricated Inlays after Accelerated Artificial Aging. J Prosth 2016; 25: 472-7.
15. Shiozawa M, Takahashi H, Asakawa Y, Iwasaki N. Color stability of adhesive resin cements after immersion in coffee. Clin Oral Investig 2015; 19: 309-17.
16. Akay C, Tanış MÇ. Evaluation of color changes of dental luting materials in food colorant solutions. Int J Artif Organs 2017; 40: 503-9.
17. Koishi Y, Tanoue N, Atsuta M, Matsumura H. Influence of visiblelight exposure on colour stability of current dual-curable luting composites. J Oral Rehabil 2002; 29: 387-93.
18. Oei JD, Mishriky M, Barghi N, Rawls HR, Cardenas HL, Aguirre R, et al. Development of a low-color, color stable, dual cure dental resin. Dent Mater 2013; 29: 405-12.
19. Turgut S, Bagis B. Colour stability of laminate veneers: an in vitro study. J Dent 2011; 39(Suppl 3): 57-64.
20. Ural Ç, Duran İ, Tatar N, Öztürk Ö, Kaya İ, Kavut İ. The effect of amine-free initiator system and the polymerization type on color stability of resin cements. J Oral Sci 2016; 58: 157-61.
21. Falkensammer F, Arnetzl GV, Wildburger A, Freudenthaler J. Color stability of different composite resin materials. J Prosthet Dent 2013; 109: 378-83.
22. Ghavam M, Amani-Tehran M, Saffarpour M. Effect of accelerated aging on the color and opacity of resin cements. Oper Dent 2010; 35: 605-9.
23. Cakan U, Kara HB. Effect of liquid polishing materials on the stainability of bis-acryl interim restorative materials in vitro. J Prosthet Dent 2015; 113: 475-9.
24. Hernandes DK, Arrais CA, Lima Ed, Cesar PF, Rodrigues JA. Influence of resin cement shade on the color and translucency of ceramic veneers. J Appl Oral Sci 2016; 24: 391-6.
25. Valentini F, Oliveira SG, Guimarães GZ, Barbosa RP, Moraes RR. Effect of surface sealant on the color stability of composite resin restorations. Braz Dent J 2011; 22: 365-8.
26. Sedrez-Porto JA, Münchow EA, Brondani LP, Cenci MS, PereiraCenci T. Effects of modeling liquid/resin and polishing on the color change of resin composite. Braz Oral Res 2016: 30.
27. Öztürk E, Chiang YC, Coşgun E, Bolay Ş, Hickel R, Ilie N. Effect of resin shades on opacity of ceramic veneers and polymerization efficiency through ceramics. J Dent 2013; 41(Suppl 5): 8-14.
28. Passos SP, Kimpara ET, Bottino MA, Rizkalla AS, Santos GC Jr. Effect of ceramic thickness and shade on mechanical properties of a resin luting agent. J Prosthodont 2014; 23: 462-6.