___

• Pandey, P.C., Shan, H.S., 1980, "Modern Machining Processes", Tata McGraw Hill Publishing Company Limited, New Delhi, 84-114. 2. McGeough, J.A., 1988, "Advanced Methods of Machining", Chapman and Hall, London New York, 128-147. 3. Springborn, R.K., 1967, "Non-Traditional Machining Processes", American Society of Tool and Manufacturing Engineers, Dearborn Michigan, 105-133
• Saito, K., Kishinami, T., Konno, H., Sato, M., 1986, "Development of numerical contouring control electric discharge machining (NCC-EDM)", Annals of the CIRP, 35 (1): 117-120. 8. Chen, S.L., Yan, B.H., Huang, F.Y., 1999, "Influence of kerosene and distilled water as dielectrics on the electric discharge machining characteristics of Ti-6Al-4V", Journal of Materials Processing Technology, 87 (1-3): 107-111. 9. Bayramoğlu, M., 1995, "Dalma elektro erozyon tezgahları ve nümerik kontrol", Makina ve Metal Teknolojisi, 45: 157-160.
• Masuzawa, T., Heuvelman, C.J., 1983, "A self flushing method with spark erosion machining", Annals of the CIRP, 32 (1): 109-111.
• Bayramoğlu, M., 1995, "Elektro erozyon tezgahlarında işlenen parçaların yüzey kalitesi", 6.
• Denizli Malzeme Sempozyumu320-326, Denizli.
• Kruth, J.-P., Stevens, L., Froyen, L., Lauwers, B., 1995, "Study of the white layer of a surface machined by die-sinking electro-discharge machining", Annals of the CIRP, 44 (1): 169-172.
• Çoğun, C., 1990, "Keeping electric discharge machining under control", Machine Design, 62 (8): 105-108. Schumacher, B. M., 1990, "About the role of debris in the gap during electrical discharge machining", Annals of the CIRP, 39 (1): 197-199.
• Özgedik, A., Çogun, C., 2006, An experimental investigation of tool wear in electric
• discharge machining, The International Journal of Advanced Manufacturing Technology, 27 (5-6): 488-500.
• Mohan, B., Rajadurai, A., Satyanarayana, K.G., 2002, "Effect of SiC and rotation of
• electrode on electric discharge machining of Al Processing Technology, 124 (3): 297-304.
• -SiC composite", Journal of Materials
• Yu, Z., Jun, T., Masanori, K., 2004, "Dry electrical discharge machining of cemented
• carbide", Journal of Materials Processing Technology, 149 (1-3): 353-357. Guu, Y.H., Hocheng, H., 2001, "Effects of workpiece rotation on machinability during electrical-discharge machining", Materials and Manufacturing Processes, 16 (1): 91-101.
• Kunieda, M., Yoshida, M., Taniguchi, N., 1997, "Electrical discharge machining in gas",
• Annals of the CIRP, 46 (1): 143-146.
• Yan, B.H., Wang, C.C., Chow, H.M., Lin, Y.C., 2000, "Feasibility study of rotary electrical
• discharge machining with ball burnishing for Al
• O3/6061Al composite", International Journal
• of Machine Tools and Manufacture, 40 (10): 1403-1421.
• Çoğun, C., Özerkan, B., Karaçay, T., 2006, "An experimental investigation on the effect of
• powder mixed dielectric on machining performance in electric discharge machining", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 220 (7): 1035-1050.
• Gillot, F., Mognol, P., Furet, B., 2005, "Dimensional accuracy studies of copper shells used
• for electro-discharge machining electrodes made with rapid prototyping and the electroforming process", Journal of Materials Processing Technology, 159 (1): 33-39.
• Monzon, M., Benıtez, A.N., Marrero, M.D., Hernandez, N.,Hernandez, P.,Aisa, J., 2008,
• "Validation of electrical discharge machining electrodes made with rapid tooling technologies", Journal of Materials Processing Technology, 196 (1-3): 109-114.
• Han, F., Wang, Y., Zhou, M., 2009, "High-speed EDM milling with moving electric arcs",
• International Journal of Machine Tools and Manufacture, 49 (1): 20-24.
• Yan, B.H., Wang, C.C., 1999, "The machining characteristics of Al2O3/6061Al composite using rotary electro-discharge machining with a tube electrode", Journal of Materials Processing Technology, 95 (1-3): 222-231.
• Küçüktürk, G., 2008, "Elektro erozyon ile iletken olmayan seramiklerin işlenmesi için yöntem
• geliştirilmesi", Doktora Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara.
• Samuel, M.P., Philip, P.K., 1997, "Power metallurgy tool electrodes for electrical discharge machining", International Journal of Machine Tools and Manufacture, 37 (11): 1625-1633.
• Tzeng , Y.-F., Lee, C.-Y., 2001, "Effects of powder characteristics on electro discharge machining efficiency", The International Journal of Advanced Manufacturing Technology, 17 (8): 586-592.
• Ishida, T., Takeuchi, Y., 2002, "L-Shaped curved hole creation by means of electrical discharge machining and an electrode curved motion generator", The International Journal of Advanced Manufacturing Technology, 19 (4): 260-265.
• Kim, D.J., Yi, S.M., Lee, Y.S., Chu, C.N., 2006, "Straight hole micro EDM with a cylindrical tool usin
• g a variable capacitance method accompanied by ultrasonic vibration", Journal of
• Micromechanics and Microengineering, 16 (5): 1092-1097.
• Yeo, S.H., Goh, K.M., 2001, "The effect of ultrasound in micro electro discharge machining
• on surface roughness", Proceedings of the Institution of Mechanical Engineers, Part B:
• Journal of Engineering Manufacture, 215 (2): 271-276.
• Changshui Gao, C., Liu, Z., 2003, "A study of ultrasonically aided micro-electrical-discharge
• machining by the application of workpiece vibration", Journal of Materials Processing
• Technology, 139 (1-3): 226-228.
• Yu, Z., Rajurkar, K.P., 2005, "Study of dielectric flow in micro hole drilling by EDM",
• Transactions of the North American Manufacturing Research Institute of SME, 33: 81-88.
• Zhixin, J., Jianhua, Z., Xing, A., 1997, "Study on a new kind of combined machining technology of ultrasonic machining and electrical discharge machining", International Journal of Machine Tools and Manufacture, 37 (2): 193-199.
• Zhixin, J., Jianhua, Z., Xing, A., 1995, "Ultrasonic vibration pulse electro-discharge machining of holes in engineering ceramics", Journal of Materials Processing Technology, 53 (3-4): 811-816.
• Zhixin, J., Xing, A., Jianhua, Z., Zhaoliang, A., 1995, "Combined machining of USM and EDM for advanced ceramics", Journal of Advanced Materials, 26 (3): 16-20.
• Thoe, T.B., Aspinwall, D.K., Killey, N., 1999, "Combined ultrasonic and electrical discharge
• machining of ceramic coated nickel alloy", Journal of Materials Processing Technology, 92- 93: 323-328. Pham, D.T., Ivanov, A., Bigot, S., Popov, K., Dimov, S., 2007, "An investigation of tube and rod electrode wear in micro EDM drilling", The International Journal of Advanced Manufacturing Technology, 33 (1-2): 103-109.
• Abdullah, A., Shabgard, M.R., 2008, "Effect of ultrasonic vibration of tool on electrical discharge machining of cemented tungsten carbide (WC-Co)", The International Journal of Advanced Manufacturing Technology, 38 (11-12): 1137-1147.
• Wansheng, Z., Zhenlong, W., Shichun, D., Guanxin, C., Hongyu, W., 2002, "Ultrasonic and electric discharge machining to deep and small hole on titanium alloy", Journal of Materials Processing Technology, 120 (1-3): 101-106.
• Huang, H., Zhang, H., Zhou, L., Zheng, H.Y., 2003, "Ultrasonic vibration assisted electro- discharge machining of microholes in Nitinol", Journal of Micromechanics and Microengineering, 13 (5): 693-700. Ghoreishi, M., Atkinson, J., 2002, "A comparative experimental study of machining characteristics in vibratory, rotary and vibro-rotary electro-discharge machining", Journal of Materials Processing Technology, 120 (1-3): 374-384.
• Kremer, D., Lhiaubet, C., Moisan, A., 1991, "A study of the effect of synchronizing
• ultrasonic vibrations with pulses in EDM", Annals of the CIRP, 40 (1): 211-214.
• Kremer, D., Lebrun, J.L., Hosari, B., Moisan, A., 1989, "Effects of ultrasonic vibrations on the performances in EDM", Annals of the CIRP, 38 (1): 199-202. Zhang, Q. H., Zhang, J. H., Deng, J. X., Qin, Y., Niu, Z. W., 2002, "Ultrasonic vibration electrical discharge machining in gas", Journal of Materials Processing Technology, 129 (1- 3): 135-138.
• Zhang, Q.H., Zhang, J.H., Ren, S.F., Deng, J.X., Ai, X., 2004, "Study on technology of ultrasonic vibration aided electrical discharge machining in gas", Journal of Materials Processing Technology, 149 (1-3): 640-644.
• Zhang, Q.H., Zhang, J.H., Ren, S.F., Niu, Z.W., Ai, X., 2005, "A theoretical model of surface roughness in ultrasonic vibration assisted electrical discharge machining in gas", International Journal of Manufacturing Technology and Management, 7 (2/3/4): 381-390.
• Zhang, Q.H., Du, R., Zhang, J.H., Zhang, Q.B., 2006, "An investigation of ultrasonic
• assisted electrical discharge machining in gas", International Journal of Machine Tools and Manufacture, 46 (12-13): 1582-1588.
• Tong, H., Li, Y., Wang, Y., 2008, "Experimental research on vibration assisted EDM of
• micro-structures with non-circular cross
• section", Journal of Materials Processing
• Technology, 208 (1-3): 289-298.
• Hao, T., Yang, W., Yong, L., 2008, "Vibration-assisted servo scanning 3D micro EDM",
• Journal of Micromechanics and Microengineering, 18 (2): 1-8.
• Murthy, V.S.R., Philip, P.K., 1987, "Pulse train analysis in ultrasonic assisted EDM", International Journal of Machine Tools and Manufacture, 27 (4): 469-477. Murti, V.S.R., Philip, P.K., 1987, "An analysis of the debris in ultrasonic-assisted electrical discharge machining", Wear, 117 (2): 241-250.
• Sundaram, M.M., Pavalarajan, G.B., Rajurkar, K.P., 2008, "A study on process parameters
• of ultrasonic assisted micro EDM based on taguchi method", Journal of Materials Engineering and Performance, 17 (2): 210-215.