Askı Tipi Çamaşır Kurutma Makinesi Tasarımı, Prototipi ve Test Edilmesi

Yapılan bu çalışmada, hızlı ve verimli kurutma yapabilmek amacıyla kullanılan kurutuculara alternatif olarak bacasız kabin tipi çamaşır kurutma makinesi tasarımı, prototipi ve testleri yapılmıştır. Çalışmada 1, 2, 3, 4, 5 ve 6 kg gibi farklı çamaşır kütlelerinde yüklenen kabin içerisindeki sıcaklık ve nem miktarının zamana bağlı değişimi ölçülerek, çamaşır kütlesinin kuruma süresine etkisi ve harcanan enerji miktarı belirlenmiştir. Deneysel sonuçlara göre 1, 2, 3, 4, 5 ve 6 kg çamaşır yüklendiğinde kurutma süresi sırasıyla 30, 40, 45, 50, 60 ve 75 dakika olarak ölçülmüştür. Kurutma işlemi esnasında enerji tüketimi 1400 d/d makinede yıkanmış ve sıkılmış 1 kg çamaşır kütlesi için yaklaşık 0,52 kWh olurken, bu değer 6 kg çamaşır için yaklaşık 1,3 kWh olmuştur. Kurutma verimi çamaşır kütlesi arttıkça azalmaktadır ve çamaşır kütlesine bağlı olarak %50 ile 60 arasında bulunmuştur. Kabin tipi çamaşır kurutma makinesinin daha az enerji tüketimi, kurutma süresi ve daha az ütü gerektirmesi gibi avantajlarıyla var olan sistemlere göre üstünlük gösterdiği belirlenmiştir.

Cabinet Type Laundry Dryer Design, Prototype and Testing

In the present work, cabinet type washings drying machine without chimney was designed, tested and studied experimentally in order to enable quick and efficient drying as an alternative dryer to the available dryer. Here, the effect of washings mass to the drying time and the amount of consumed energy was determined by measuring time dependent moisture rate and temperature inside the cabin that loaded different washings mass as 1, 2, 3, 4, 5 and 6 kg. According to the experimental results when washings loaded as 1, 2, 3, 4, 5 and 6 kg, the drying time was measured as 30, 40, 45, 50, 60 and 75 minute respectively. During the drying process, energy consumption was 0.52 kWh for the 1 kg washings that washed and squeezed 1400 rpm machine while it was 1.3 kWh for the 6 kg washings. Drying efficiency decreases with increasing washings mass and it was found between 50% and 60% depending on washings mass. It is determined that the cabin type washings drying machine has more advantages than other available conventional dryers due to less energy consumption and drying time and need the less iron.

___

  • 1. Mujumdar A.S., 1998, “Preface. In: Modern drying technology”, Beijing: Chemical Industry Press.
  • 2. Keçebaş, A., 2013, “Variation of insulation thickness and exergetic cost saving with outdoor temperature in pipe insulation”, Environmental Progress & Sustainable Energy, 32 (3), 784-789.
  • 3. Bansal, P.K., Braun, J., Groll, E., 2001, “Improving the energy efficiency of conventional tumbler clothes drying systems”, International Journal of Energy Research, 25 (15), 1315–1332.
  • 4. J. Braun, P.K. Bansal, E. Groll, 2002, “Energy efficiency analysis of air cycle heat pump dryers”, International Journal of Refrigeration, 25(7), 954– 965.
  • 5. Bassily, A.M., Colver, G.M., 2003, “Performance analysis of an electric clothes dryer”, Drying Technology, 21 (3), 500–524.
  • 6. Bansal, P., Islam, S. and Sharma, K., 2010, “A novel design of a household clothes tumbler dryer”, Applied Thermal Engineering, 30, 277–285.
  • 7. Cooper, M.J., 2006, “Energy efficiency of a Fisher and Paykel household tumbler dryer” Project in Mechanical Engineering, The University of Auckland.
  • 8. Tokat, A.I., 2012, “Askı tipi çamaşır kurutma makinesi tasarımı, protatipi ve test edilmesi”, Yüksek Lisans Tezi, Karabük Üniversitesi Fen Bilimleri Enstitüsü, Karabük.
  • 9. Ceylan, İ., Aktaş, M., ve Doğan, H., 2007, “Isı pompalı bir kurutucuda kerestelerin kurutma süresinin belirlenmesi”, Gazi Üniv. Müh. Mim. Fak. Der., 22(4), 847-854.