___

• 1. Nobuhide, I.; Hitoshi, O.; Sei, M.; Toshio, K.; Toshiro, K.; B., P., Finishing characteristics of brittle materials by ELID-lap grinding using metal-resin bonded wheels", International Journal of Machine Tools and Manufacture, 38 (7): 747- 762 (1998).
• 2. Dominic, S., Kyusojin, A., Isobe, H., Kaneko, Y., "Development of a new Iapping method for high precision ball screw. (1 Report) -feasibility study of a prototyped Iapping tool for automatic lapping process", Precision Engineering, 25(1): 63-69 (2001).
• 3. Krar, S. F., Check, A. F., "Technology Of Machine Tools Fifth Edition", Mc Graw Hill, New York, 180-183 (1997).
• 4. Bawa, H.S., "Workshop Technology.", 2, McGraw Hill Publishing Company Limited, New Delhi, 320-321 (1995).
• 5. Bağcı, M., Erişkin, Y., Aslaner, M., "Taşlamacılık ve Alet Bileme Teknolojisi", Milli Eğitim Basımevi, İstanbul, 4543-470 (1982).
• 6. Verspui M.A., De W., G.,"Three-body abrasion: influence of applied load on bed thickness and partide size distribution in abrasive processes", Journal European Ceramic Society, 17 (2-3): 473-477(1997).
• 7. Perdo, L.G., De M., Jose D. B., "Effect of crystal orientation on lapping and polishing processes of natural quartz", IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 47 (5): 1217-1227 (2000).
• 8. Kim, J.D., Choi, M.S., "Study on the optimization of the cylindrical Iapping process for engineering fine-ceramics (Al203) by the statistical design method", Journal of Materials Processing Technology, 52(2-4): 368-385 (1995)
• 9. Krar, S. F., Oswald,J. W., Amand, J.E. St.,"Technology Of Machine Tools", Mc Graw Hill, New York, 136-138 (1984).
• 10. Güllü, A., "Silindirik Taşlamada Istenen Yüzey Pürüzlülüğünü Elde Etmek İçin Taşlama Parametrelerinin Bilgisayar Yardımıyla Optimizasyonu", Doktora Tezi, G.O. Makine Eğitimi Bölümü, Ankara, 25-52 (1995).
• 11. http://www. mfginfo.com (2000).
• 12. Jiang, W., Liu, X. L., "Lapping technique of InP single crystal wafer", Crystal Research and Technology, 32 (2): 243-247 (1997). 13. Güllü, A.,Özdemir A., Demir, H., "Yüzey pilrüzlülüğt1 Olçme yöntemleri ve mukayesesi", Zonguldak Karaelmas Üniversitesi, Karabük Teknik Eğitim Fakültesi, Teknoloji Dergisi, 1-2: 79-92 (2003).
• 14. Lambropoulos, J. C.; Su, X., Tong, F.,"Loose abrasive lapping hardness of optical glasses and its interpretation", Applied Optics, 36(7): 1501-1516 (1997).