___

• 1. Swift, H.W., Plastic Strain in an Isotropic Strain Hardening Material, Engineering, No. 162, 1947, 381.
• 2. Swift, H.W., Two Stage Drawing of Cylindrical Cups, Trans. Institute of Eng. Slip in Scotland, No. 86, 1943, 195-196.
• 3. Chung, S.Y. and Swift, H.W., Cup Drawing from a Hat Blank, Proc. Inc. Mechanical Engineers, V.169, No. 199, 1951.
• 4. Woo, D.M., On the Complete Solution of the Deep Drawing Problem, Int. J. Mech. Science, Pergamon Press, Vo1.10, 1967, 83-94.
• 5. Woo, D.M., Analysis of the Cup Drawing Process, J. of Mechanical Engineering Science, 1964, Vol.6.
• 6. Wifi, A.S., An Incremental Complete Solution of the Stretch Forming Deep Drawing of a Circular Blank, Using a Hemispherical Punch", Int. J. Mech. Science, Pergamon Press, Vol.14, 1976, 23-31.
• 7. Crane, V., Plastic Working of Metals and Non-metallic Materials in Presses, John Wiley and Sons, Inc., New York, 1954, 150-212.
• 8. Yamada, Y., Studies on Formability of Sheet Metals, Inst. Inds. Science Univ. of Tokyo, V.11, No: 5, 1969.
• 9. Hiraiwa, M., Kondo, K., On the Characteristics of Square Cup Drawing Bulletin of JSME, Vo1.26, 1985, 2287-2294.
• 10. Kaftanoğlu, B., An Investigation of Stretch Forming in Relation to Deep Drawing and Testing Sheet Metal, Ph.D. Thesis, Imperial College, University of London, 1966.
• 11. Darendeliler, H., Kaftanoğlu, B., Deformation Analysis of Deep Drawing by a Finite Element Method, Annals of the CIRP, Vol.40, No.1, 1991, 281-284.
• 12. Yıldırım, R.O., Experimental and Numerical Analysis of Deep Drawing, M.Sc. Thesis, Middle East Technical University, Ankara, 1997.
• 13. ABAQUSEXAMPLE REFERANCE MANUAL.
• 14. Darendeliler, H., Computer Aided Deformation Analysis of Deep Drawing Process, Ph.D Thesis, Middle East Technical University, Ankara, 1991.