Tugba TEMIZCI, Ali Rıza TUNÇDEMİR

9375

Effects of Three Aging Methods on Colour Differences of All-Ceramic Materials

Effects of Three Aging Methods on Colour Differences of All-Ceramic Materials

Objective. The aim of the study is to test the effects of three different aging methods on colour change (E00) in three different all-ceramic systems prepared in two thicknesses (0.5 and 1.0 mm). Materials and methods. Zirconia Katana UTML (ZK), Prettau Anterior (PA) and IPS-e.max press (EP) prepared in two thicknesses were tested using in vitro artificial accelerated aging (AAA), thermocycling (TC) and autoclave aging (AA) methods. The effects on the colour (CIE L*a*b*) differences were determined using a spectrophotometer and evaluated by analysis of variance (ANOVA). Results. The aging protocols affected the E00-values of the ceramic systems at different levels (0.64–2.69), and the ceramic thicknesses were statistically significant (P <0.5). Generally (excluding the 0.5-mm EP group), the highest E00 value among the methods of aging was in the AAA applied samples, followed by those in the TC and the AA. Also, the ceramic thickness was found to be significant in testing aging protocols. In addition, the E00-values of the ceramic materials tested were below the clinically accepted level. Conclusions. Three ceramic types – prepared in two different thicknesses and applied for three 1-year in vitro aging protocols – were affected at different levels by the aging methods tested, and significant colour differences were determined among all the ceramic samples. Clinical Significance: One-year applications of three aging protocols (AAA, TC and AA) resulted in significant differences in the E00-values of ceramic systems (ZK, PA and EP). The differences between the E00-values among the aging tests in the all-ceramic types and the all-ceramic thicknesses were significant.
Keywords:

Accelerated aging, Autoclave aging, Thermocycling Colour stability, Dental ceramics,

PDF

___

  • [1] Conrad HJ, Seong WJ, Pesun IJ. Current ceramic materials and systems with clinical recommendations: a systematic review. J Prosthet Dent 2007; 98(5):389-404.
  • [2] Douglas RD, Brewer JD. Acceptability of shade differences in metal ceramic crowns. J Prosthet Dent 1998; 79(3):254-260.
  • [3] Kelly J, Benetti P. Ceramic materials in dentistry: historical evolution and current practice. Aust Dent J 2011; 56(s1):84-96.
  • [4] Haselton DR, Diaz-Arnold AM, Hillis SL. Clinical assessment of high-strength all-ceramic crowns. J Prosthet Dent 2000; 83(4):396-401.
  • [5] Türkcan İ, Nalbant AD. Dental protetik materyallerin biyolojik uyumluluğu ve test yöntemleri. AOT 2016; 33(3):145-152.
  • [6] Schulze KA, Marshall SJ, Gansky SA, Marshall GW: Color stability and hardness in dental composites after accelerated aging. Dental materials 2003; 19(7):612-619.
  • [7] Sundh A, Kou W, Sjögren G. Effects of Pretreatment, Specimen Thickness, and Artificial Aging on Biaxial Flexural Strength of Two Types of Y-TZP Ceramics. Operative dentistry 2019; 44(6):615-624.
  • [8] Walczak K, Meißner H, Range U, Sakkas A, Boening K, Wieckiewicz M, Konstantinidis I. Translucency of zirconia ceramics before and after artificial aging. Journal of Prosthodontics 2019; 28(1):e319-e324.
  • [9] Hatanaka GR, Polli GS, Adabo GL. The mechanical behavior of high-translucent monolithic zirconia after adjustment and finishing procedures and artificial aging. The Journal of Prosthetic Dentistry 2020; 123(2):330-337.
  • [10] Kurt M, Bal BT. Effects of accelerated artificial aging on the translucency and color stability of monolithic ceramics with different surface treatments. The Journal of prosthetic dentistry 2019; 121(4):712. e711-712. e718.
  • [11] da Rocha JFS, de Avila ED, Rigolin MSM, Barbugli PA, Marin DO, Junior FAM, Jorge JH. Biological and physicochemical implications of the aging process on titanium and zirconia implant material surfaces. The Journal of Prosthetic Dentistry 2020.
  • [12] Yazigi C, Schneider H, Chaar MS, Rüger C, Haak R, Kern M. Effects of artificial aging and progression of cracks on thin occlusal veneers using SD-OCT. Journal of the mechanical behavior of biomedical materials 2018; 88:231-237.
  • [13] Wei C, Gong X, Xie C, Chen Z, Li S, Gremillard L. In vitro cyclic fatigue and hydrothermal aging lifetime assessment of yttria-stabilized zirconia dental ceramics. Journal of the European Ceramic Society 2020.
  • [14] Ustun S, Ayaz EA. Effect of different cement systems and aging on the bond strength of chairside CAD-CAM ceramics. The Journal of Prosthetic Dentistry 2020.
  • [15] Dikicier S, Ayyildiz S, Ozen J, Sipahi C. Influence of core thickness and artificial aging on the biaxial flexural strength of different all-ceramic materials: An in-vitro study. Dental materials journal 2017; 36(3):296-302.
  • [16] Sim IG, Shin Y, Shim JS, Kim JE, Kim JH. Effects of artificial aging on the biaxial flexural strength of Ce-TZP/Al2O3 and Y-TZP after various occlusal adjustments. Ceramics International 2017; 43(13):9951-9959.
  • [17] El Badawy AA, Abd El Aziz MH, Omar EA. Color stability of ceramic occlusal veneer with different translucency, designs and resin cement curing modes using “accelerated Artificial Aging”. Egyptian Dental Journal 2019; 65(1-January (Fixed Prosthodontics, Dental Materials, Conservative Dentistry & Endodontics)):367-374.
  • [18] Monzavi DM, Zhang F, Douillard T, Gremillard L, Noumbissi S, Nowzari H, Chevalier J. Microstructural analyses of artificial ageing in 5 commercially and non-commercially available zirconia dental implants. Journal of the European Ceramic Society 2020.
  • [19] Triwatana P, Nagaviroj N, Tulapornchai C: Clinical performance and failures of zirconia-based fixed partial dentures: a review literature. J Adv Prosthodont 2012; 4(2):76-83.
  • [20] Dikicier S, Ayyildiz S, Ozen J, Sipahi C. Effect of varying core thicknesses and artificial aging on the color difference of different all-ceramic materials. Acta Odontol Scand 2014; 72(8):623-629.
  • [21] Zirkonzahn [http://pdf.medicalexpo.com/pdf/zirkonzahn/zirkonzahn/74646-151119.html]
  • [22] Douglas RD. Color stability of new-generation indirect resins for prosthodontic application. J Prosthet Dent 2000; 83(2):166-170.
  • [23] Stevenson B, Ibbetson R. The effect of the substructure on the colour of samples/restorations veneered with ceramic: a literature review. J Dent 2010; 38(5):361-368.
  • [24] Berns RS. Billmeyer and Saltzman's principles of color technology: Wiley; 2019.
  • [25] Rattacaso RMB, Garcia LdFR, Aguilar FG, Consani S, Pires-de FdCP. Bleaching agent action on color stability, surface roughness and microhardness of composites submitted to accelerated artificial aging. Eur J Dent 2011; 5(2):143.
  • [26] Saygili G, Şahmali S, Demirel FJJoor. Colour stability of porcelain repair materials with accelerated ageing. 2006; 33(5):387-392.
  • [27] El-Araby A, Talic Y. The effect of thermocycling on the adhesion of self-etching adhesives on dental enamel and dentin. J Contemp Dent Pract 2007; 8(2):17-24.
  • [28] Chevalier J, Cales B, Drouin JM. Low‐temperature aging of Y‐TZP ceramics. J Am Ceram Soc 1999; 82(8):2150-2154.
  • [29] Deville S, Gremillard L, Chevalier J, Fantozzi G. A critical comparison of methods for the determination of the aging sensitivity in biomedical grade yttria‐stabilized zirconia. J Biomed Mater Res B Appl Biomater 2005; 72(2):239-245.
  • [30] O’Brien W. Dental materials and their selection, 4 edn: Quintessence Publishing Co, Inc; 2002.
  • [31] Schanda J. Colorimetry. understanding the CIE system: John Wiley & Sons; 2007.
  • [32] Kurtulmus-Yilmaz S, Ulusoy M. Comparison of the translucency of shaded zirconia all-ceramic systems. J Adv Prosthodont 2014; 6(5):415-422.
  • [33] Oh SH, Kim SG. Effect of abutment shade, ceramic thickness, and coping type on the final shade of zirconia all-ceramic restorations: in vitro study of color masking ability. J Adv Prosthodont 2015; 7(5):368-374.
  • [34] Bachhav VC, Aras MA. The effect of ceramic thickness and number of firings on the color of a zirconium oxide based all ceramic system fabricated using CAD/CAM technology. J Adv Prosthodont 2011; 3(2):57-62.
  • [35] Niu E, Agustin M, Douglas RD. Color match of machinable lithium disilicate ceramics: Effects of cement color and thickness. J Prosthet Dent 2014; 111(1):42-50.
  • [36] Stawarczyk B, Emslander A, Roos M, Sener B, Noack F, Keul C. Zirconia ceramics, their contrast ratio and grain size depending on sintering parameters. Dent Mater J 2014; 33(5):591-598.
  • [37] Shiraishi T, Wood DJ, Shinozaki N, van Noort R. Optical properties of base dentin ceramics for all-ceramic restorations. Dent Mater 2011; 27(2):165-172.
  • [38] Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part II: core and veneer materials. J Prosthet Dent 2002; 88(1):10-15.
  • [39] Tamam E, Güngör M, Nemli S. How are the color parameters of a CAD/CAM feldspathic ceramic of the material affected by its thickness, shade, and color of the substructure? Nigerian Journal of Clinical Practice 2020; 23(4):523.
  • [40] Volpato CÂM, Cesar PF, Bottıno MA. Influence of accelerated aging on the color stability of dental zirconia. J Esthet Restor Dent 2016; 28(5):304-312.
  • [41] Fathi A, Farzin M, Giti R, Kalantari MH. Effects of number of firings and veneer thickness on the color and translucency of 2 different zirconia-based ceramic systems. The Journal of prosthetic dentistry 2019; 122(6):565. e561-565. e567.
  • [42] Alayad AS, Alqhatani A, Alkatheeri MS, Alshehri M, AlQahtani MA, Osseil AEB, Almusallam RA. Effects of CAD/CAM ceramics and thicknesses on translucency and color masking of substrates. The Saudi Dental Journal 2020.
  • [43] Pekkan G, Özcan M, Subaşı MG. Clinical factors affecting the translucency of monolithic Y-TZP ceramics. Odontology 2019;1-6.
  • [44] Alghazzawi TF. The effect of extended aging on the optical properties different zirconia materials. J Prosthodont Res 2017; 61(3):305-314.
  • [45] Hallmann L, Mehl A, Ulmer P, Reusser E, Stadler J, Zenobi R, Stawarczyk B, Özcan M, Hämmerle CH. The influence of grain size on low‐temperature degradation of dental zirconia. J Biomed Mater Res B Appl Biomater 2012; 100(2):447-456.
  • [46] Lughi V, Sergo V. Low temperature degradation-aging-of zirconia: A critical review of the relevant aspects in dentistry. Dent Mater 2010; 26(8):807-820.
  • [47] Borchers L, Stiesch M, Bach F-W, Buhl J-C, Hübsch C, Kellner T, Kohorst P, Jendras M. Influence of hydrothermal and mechanical conditions on the strength of zirconia. Acta Biomater 2010; 6(12):4547-4552.
  • [48] Cattani-Lorente M, Scherrer SS, Ammann P, Jobin M, Wiskott HA. Low temperature degradation of a Y-TZP dental ceramic. Acta Biomater 2011; 7(2):858- 865.
  • [49] Kosmač T, Dakskobler A, Oblak Č, Jevnikar P. The strength and hydrothermal stability of Y‐TZP ceramics for dental applications. Int J Appl Ceram Technol 2007; 4(2):164-174.
  • [50] Kim HK, Kim SH, Lee JB, Han JS, Yeo IS. Effect of polishing and glazing on the color and spectral distribution of monolithic zirconia. J Adv Prosthodont 2013; 5(3):296-304.
  • [51] Tuncdemir MT, Gulbahce N, Aykent F. Comparison of color stability of two laminate veneers cemented to tooth surfaces with and without preparation. Journal of Esthetic and Restorative Dentistry 2020.
  • [52] Palla ES, Kontonasaki E, Kantiranis N, Papadopoulou L, Zorba T, Paraskevopoulos KM, Koidis P. Color stability of lithium disilicate ceramics after aging and immersion in common beverages. J Prosthet Dent 2018; 119(4):632-642.
Karamanoğlu Mehmetbey Üniversitesi Mühendislik ve Doğa Bilimleri Dergisi-Cover
  • Yayın Aralığı: Yılda 2 Sayı
  • Başlangıç: 2019
  • Yayıncı: Karamanoğlu Mehmetbey Üniversitesi
Arşiv
Sayıdaki Diğer Makaleler

Triaxiality and Cubic Terms From Casimir Invariants

Ramesh KUMAR, Şadiye ÇAKMAK

Katkı Malzemelerinin Fazla Kullanılmasının Betona Etkisi: Vaka Analizi

Abdulkerim İLGÜN, İlker Yılmaz TÜRKER, Abdullah MÜSEVİTOĞLU, Mustafa Tolga ÇÖĞÜRCÜ

N(κ)-Contact Metric Manifolds Admitting Z-Tensor

İnan ÜNAL

Effects of Three Aging Methods on Colour Differences of All-Ceramic Materials

Tugba TEMIZCI, Ali Rıza TUNÇDEMİR

Gömülü Sistem Tabanlı Çim Biçme Robotu Tasarımı

Emre CEYLAN, Selami BALCI, Kadir SABANCI

Sağlık Hizmetlerine İlişkin Hasta Memnuniyetinin Bir Analizi

Semra KONCA