Cengiz Ayhan ZIBA, Sümeyye AKARSU, Nuran ÇELİKÇİ, Mustafa DOLAZ

Klima Tozundan Hidroksipropilmetil Selüloz (HPMC) Sentezi ve Karakterizasyonu

Bu çalışmada, Kahramanmaraş’ta bulunan tekstil fabrikalarında atık olarak çıkan ve “klima toz”u (APVD) olarak adlandırılan selüloz içerikli iplik olmaya elverişsiz pamuk lifleri değerlendirilmiştir. Bu amaçla, ilk olarak atık klima tozu musluk suyu ile yığın halinde yıkanarak % 17,5’luk NaOH ile 90 oC’de pişirilmiştir. Bu yığın kurutulmadan NaOH ve H2O2 ile 90 oC’de ağartılmıştır. Sonra elde edilen selüloz NaOH ile soğuk ortamda merserize edilmiştir. Daha sonra selülozunun, propilenoksit (PO) ve metilklorür ile heterojen reaksiyonundan, yüksek (HPMC-H), orta (HPMC-M) ve düşük (HPMC-L) sübsitasyon derecesine sahip üç farklı hidroksipropilmetil selüloz (HPMC) sentezlen-miştir. Sentezlenen HPMC’lerin yapıları FT-IR ve XRD spektroskopisi ile aydınlatılarak DTA-TG ile termal davranışları, SEM ile yüzey morfolojileri incelenmiştir. HPMC örneklerinin viskoziteleri tayin edilip en yüksek değer 820 cP olarak bulunmuştur.

Anahtar Kelimeler:

Klima tozu, atık pamuk, hidroksipropilmetil selüloz, DTA-TG

Synthesis and Characterization of Hydroxypropylmethyl Cellulose from “Air Particle Vacuum Dust”

In this study, in cotton factories located in Kahramanmaraş, waste cotton fibers which are not suitable for cellulose fiber yarns called “air particle vacuum dust” (APVD) have been evaluated. For this purpose, the waste was firstly washed with tap water and then, boiled at 90 °C with 17.5% NaOH. This batch was bleached at 90 oC by H2O2 in basic solution without drying. The cellulose obtained was then mercerized by NaOH in cold temperature. Hydroxypropylmethyl cellulose which has three different substitution degree [high (HPMC-H), medium (HPMC-M) and low (HPMC-L)] was then synthesized with propyleneoxide (PO) and methylchloride in the heterogeneous reaction media. The structures of the synthesized HPMCs were characterized by FT-IR and XRD. Thermal behaviors of HPMCs were investigated by the DTA-TG method and their surface morphology was analyzed by the SEM method. The viscosities of HPMCs samples were determined and to be the highest 820 cP.

Keywords:

air particle vacuum dust, waste cotton, hydroxypropylmethyl cellulose, DTA-TG,

PDF

___

Amin M., Hussain M.A., Batool Bukhari S.A., Sher M., Shafiq Z. (2017). Green Synthesis and Isoconversional Thermal Analysis of Hpmc Acetate: A Potent Matrix For Drug Delivery, Cellulose Chemistry and Technology, 51 (3-4), 245-252.
Burdock G.A. (2007). Safety assessment of hydroxypropyl methylcellulose as a food ingredient, Food and Chemical Toxicology, 45, 2341–2351.
Ciolacu D., Ciolacu F., Popa V.I. (2011). Amorphous cellulose – structure and characterızatıon, Cellulose Chemistry and Technology, 45 (1-2), 13-21.
Nevell T.P, Zeronian S.H. (1985). Cellulose Chemistry and Its Applications. New York: Halsted Press, John Wiley, 22–26.
Park S., Baker J.O., Himmel M.E., Parilla P.A., Johnson D.K. (2010). Cellulose crystallinity index: measurement techniques and their impact on interpreting cellulase performance, Biotechnology for Biofuels, 3,1-10.
Prabhu D.M., Li W.J. (2015). The most abundant and natural source: cellulose and its derivatives and their applications. In: Mondal IH, editor. Cellulose and Cellulose Derivatives: Synthesis, Modification and Applications. New York: Nova Science Publishers Inc., 3–16.
Roy S., Pal K., Thakur G., Prabhakar B. (2010). Synthesis of Novel Hydroxypropyl Methyl Cellulose Acrylate— A Novel Superdisintegrating Agent for Pharmaceutical Applications, Materials and Manufacturing Processes, 25, 1477–1481.
Wang L., Dong W., Xu Y. (2007). Synthesis and characterization of hydroxypropyl methylcellulose and ethyl acrylate graft copolymers, Carbohydrate Polymers, 68, 626–636.
Varshney V.K., Naithani S. (2011). Chemical functionalization of cellulose derived from nonconventional sources. In: Kalia S, editor. Cellulose Fibers: Bio- and Nano-Polymer Composites. Heidelberg: Springer-Verlag Berlin, 43–60.