___

• 1. DoLIDAR, Statistics of local road network (SLRN), 2016, Tech. rep. (2016) 2. World Bank, Nepal road sector assessment study, Tech. rep. (2012). 3. E. Hesami, Characterisation and modelling of asphalt mastic and their effect on workability (PhD dissertation), Tech. rep., Division of Highway and Railway Engineering, Stockholm, Stockholm (2014) 4. F. P. Jimenez, R. M. Recasens, A. Mart ´ ´ınez, Effect of filler nature and content, Road Materials and Pavement Design 9 (1) (2008) 417–431. 5. ASTM, Standard specification for mineral filler for bituminous paving mixtures, Tech. rep. (2000). 6. R. Mistry, T. K. Roy, Effect of using fly ash as alternative filler in hot mix asphalt, Perspectives in Science 8 (2016) 307–309. 7. D. Lesueur, M. L. Blazquez, D. A. Garcia, A. R. Rubio, On the impact of the filler on the complex ´ modulus of asphalt mixtures, Road Materials and Pavement Design (2017) 1–15. 8. DoR, Standard specification for road and bridge works, Tech. rep. (2015). 9. American Coal Ash Association, Fly ash facts for highway engineers, Tech. rep. (2003). 10. S. Likitlersuang, T. Chompoorat, Laboratory investigation of the performances of cement and fly ash modified asphalt concrete mixtures, International Journal of Pavement Research and Technology 9 (5) (2016) 337–344. 11. E. G. Bautista, J. Flickinger, R. Saha, I. Flores-Vivian, A. F. Faheem, K. Sobolev, Effect of coal combustion products on high temperature performance of asphalt mastics, Construction and Building Materials 94 (1) (2015) 572–578 12. A. Modarres, M. Rahmanzadeh, Application of coal waste powder as filler in hot mix asphalt, Construction and Building Materials 66 (2014) 476–483. 13. A. H. Abdelrazig, S. A. Osman, A. A. M. Elhassan, The influence of fly ash on the engineering properties of asphalt and hot mix asphalt, International Journal of Pavement Research and Technology 4 (2) (2016) 109–116. 14. K. Sobolev, I. Flores, J. D. Bohler, A. Faheem, A. Covi, Application of fly ash in asphalt concrete: from challenges to oppurtunities, Tech. rep., Department of Civil Engineering and Mechanics, University of Wisconsin-Milwaukee; Bloom Companies; Department of Civil Engineering, University of Wisconsin -Plattevilel; We Energies (2013). 15. R. L. Schroeder, The use of recycled materials in highway construction, Tech. rep., U.S. Department of Transportation/ Federal Highway Administration (1994). 16. K. Amatya, Geology and mineral resources of Nepal - An overview, Tech. rep., Department of Mines and Geology, Kathmandu, Nepal (1995). 17. S. Chandra, P. Kumar, B. A. Feyissa, Use of marble dust in road construction, Road Materials and Pavement Design 3 (2002) 317–330. 18. M. A. Bhatt, O. Mittal, Effect of fillers on bituminous mixes, International Journal of Advanced Research in Education & Technology 3 (2). 19. ASTM-D6926, Standard practice for preparation of bituminous specimens using Marshall apparatus, Tech. rep. (2010). 20. ASTM-D6927, Standard test method for Marshall stability and flow of bituminous mixtures, Tech. rep. (2006).