___

• [1] Jiang, B., Iocozzia, J., Zhao, L., Zhang, H., Harn, Y.-W., Chen, Y., Lin, Z., (2019), Barium titanate at the nanoscale: controlled synthesis and dielectric and ferroelectric properties, Chemical Society Reviews, 48 (4), 1194–1228.
• [2] Ashwini, L.S., Sridhar, R., Bellad, S.S., (2017), Dielectric and magnetoelectric properties of Li-Mg ferrite: Barium titanate composites, Materials Chemistry and Physics, 200, 136–145.
• [3] Petrović, M.M.V., Bobić, J.D., Banys, J., Stojanović, B.D., (2013), Electrical properties of antimony doped barium titanate ceramics, Materials Research Bulletin, 48 (10), 3766–3772.
• [4] Morrison, F.D., Sinclair, D.C., West, A.R., (2001), Characterization of lanthanum‐doped barium titanate ceramics using impedance spectroscopy, Journal of the American Ceramic Society, 84 (3), 531–538.
• [5] Lu, D., Toda, M., and Sugano, M., (2006), High‐permittivity double rare‐earth‐doped barium titanate ceramics with diffuse phase transition, Journal of the American Ceramic Society, 89 (10), 3112–3123.
• [6] Rejab, N.A., Sreekantan, S., Razak, K.A., Ahmad, Z.A., (2011), Structural characteristics and dielectric properties of neodymium doped barium titanate, Journal of Materials Science: Materials in Electronics, 22 (2), 167–173.
• [7] Sun, Q., Gu, Q., Zhu, K., Jin, R., Liu, J., Wang, J., Qiu, J., (2017), Crystalline structure, defect chemistry and room temperature colossal permittivity of Nd-doped barium titanate, Scientific Reports, 7, 42274.
• [8] Petrović, M.M.V., Grigalaitis, R., Ilic, N., Bobić, J.D., Dzunuzovic, A., Banys, J., Stojanović, B.D., (2017), Interdependence between structure and electrical characteristics in Sm-doped barium titanate, Journal of Alloys and Compounds, 724, 959–968.
• [9] Ganguly, M., Rout, S.K., Woo, W.S., Ahn, C.W., Kim, I.W., (2013), Characterization of A-site deficient samarium doped barium titanate, Physica B: Condensed Matter, 411, 26–34.
• [10] Cai, W., Fu, C., Gao, J., Deng, X., Chen, G., Lin, Z., (2012), Effect of samarium on the microstructure, dielectric and ferroelectric properties of barium titanate ceramics, Integrated Ferroelectrics, 140 (1), 92–103.
• [11] Li, Y.-X., Yao, X., Wang, X.-S., Hao, Y.-B., (2012), Studies of dielectric properties of rare earth (Dy, Tb, Eu) doped barium titanate sintered in pure nitrogen, Ceramics International, 38, S29–S32.
• [12] Ben, L. and Sinclair, D.C., (2011), Anomalous Curie temperature behavior of A-site Gd-doped BaTiO3 ceramics: The influence of strain, Applied Physics Letters, 98 (9), 92907.
• [13] Paunović, V. and Živković, L., (2010), Influence of Rare-Earth Additives (La, Sm and Dy) on the Microstructure and Dielectric Properties of Doped BaTiO3 Ceramics, Science of Sintering, 42 (1), 69-79.
• [14] Paunovic, V., Mitic, V. V, Prijic, Z., Zivkovic, L., (2014), Microstructure and dielectric properties of Dy/Mn doped BaTiO3 ceramics, Ceramics International, 40 (3), 4277–4284.
• [15] Sun, Q., Gu, Q., Zhu, K., Wang, J., Qiu, J., (2016), Stabilized temperature-dependent dielectric properties of Dy-doped BaTiO3 ceramics derived from sol-hydrothermally synthesized nanopowders, Ceramics International, 42 (2), 3170–3176.
• [16] Cernea, M., Galassi, C., Vasile, B.S., Ganea, P., Radu, R., Ghita, G., (2010), Electrical investigations of holmium-doped BaTiO3 derived from sol-gel combustion, Journal of Materials Research, 25 (6), 1057–1063.
• [17] Mitic, V. V, Nikolic, Z.S., Pavlovic, V.B., Paunovic, V., Miljkovic, M., Jordovic, B., Zivkovic, L., (2010), Influence of rare‐earth dopants on barium titanate ceramics microstructure and corresponding electrical properties, Journal of the American Ceramic Society, 93 (1), 132–137.
• [18] Jo, S.K., Park, J.S., Han, Y.H., (2010), Effects of multi-doping of rare-earth oxides on the microstructure and dielectric properties of BaTiO3, Journal of Alloys and Compounds, 501 (2), 259–264.
• [19] Hwang, J.H. & Han, Y.H., (2001), Dielectric properties of erbium doped barium titanate, Japanese Journal of Applied Physics, 40 (2R), 676.
• [20] Li, Y., Hao, Y., Wang, X., Yao, X., (2010), Studies of dielectric properties of rare earth (Y, Gd, Yb) doped barium titanate sintered in pure nitrogen, Ferroelectrics, 407 (1), 134–139.
• [21] Ismail, F.A., Osman, R.A.M., Idris, M.S., (2016), Review on dielectric properties of rare earth doped barium titanate, in M.F.B.M., Nazeri, L.B., Ying, and M.S.B., Idris (Eds.), AIP Conference Proceedings, 1756(1), 090005, AIP Publishing LLC.
• [22] Chen, Y.L., Yang, S.F., (2011), PTCR effect in donor doped barium titanate: review of compositions, microstructures, processing and properties, Advances in Applied Ceramics, 110 (5), 257–269.
• [23] Zakrzewska, K., (2001), Mixed oxides as gas sensors, Thin Solid Films, 391 (2), 229–238.
• [24] Cousin, P., Ross, R.A., (1990), Preparation of mixed oxides: a review, Materials Science and Engineering: A, 130 (1), 119–125.
• [25] Panigrahi, M., Shibata, E., Iizuka, A., Nakamura, T., (2013), Production of Fe–Ti alloy from mixed ilmenite and titanium dioxide by direct electrochemical reduction in molten calcium chloride, Electrochimica Acta, 93, 143–151.
• [26] Kantorová, M. Veselý, D., (2013), Mixed metal oxides with the structure of perovskite for anticorrosion organic coatings, Physics Procedia, 44, 213–223.
• [27] Ferrarelli, M.C., Tan, C.C., Sinclair, D.C., (2011), Ferroelectric, electrical, and structural properties of Dy and Sc co-doped BaTiO3, Journal of Materials Chemistry, 21 (17), 6292–6299.
• [28] Chiou, B.-S., Wang, I.-H., (1998), Effect of MgO addition on the electrical transport properties of highly Sb-doped BaTiO3 ceramics, Journal of Materials Science: Materials in Electronics, 9 (2), 145–150.
• [29] Hreniak, D., Strek, W., Chmielowiec, J., Pasciak, G., Pazik, R., Gierlotka, S., Lojkowski, W., (2006), Preparation and conductivity measurement of Eu doped BaTiO3 nanoceramic, Journal of Alloys and Compounds, 408, 637–640.
• [30] Lu, D.-Y., Cui, S.-Z., Liu, Q.-L., Sun, X.-Y., (2016), Dielectric properties and defect chemistry of barium titanate ceramics co-doped R and Dy ions (R= Eu, Gd, Tb), Ceramics International, 42 (13), 14364–14373.
• [31] Yildirim, S., Akalin, S.A., Oguzlar, S., Ongun, M.Z., Ozer, C., Erol, M., (2019), Comparison of structural and optical properties of CeO2 and CeO2: Eu 3+ nanoparticles synthesized via sol–gel and flame spray pyrolysis methods, Journal of Materials Science: Materials in Electronics, 30 (14), 13749–13756.
• [32] Park, K.-J., Kim, C.-H., Yoon, Y.-J., Song, S.-M., Kim, Y.-T., Hur, K.-H., (2009), Doping behaviors of dysprosium, yttrium and holmium in BaTiO3 ceramics, Journal of the European Ceramic Society, 29 (9), 1735–1741.
• [33] Lu, D.-Y., (2015), Self-adjustable site occupations between Ba-site Tb3+ and Ti-site Tb4+ ions in terbium-doped barium titanate ceramics, Solid State Ionics, 276, 98–106.
• [34] Lee, W.-H., Groen, W.A., Schreinemacher, H., Hennings, D., (2000), Dysprosium doped dielectric materials for sintering in reducing atmospheres, Journal of Electroceramics, 5 (1), 31–36.
• [35] Buscaglia, M.T., Buscaglia, V., Viviani, M., Nanni, P., Hanuskova, M., (2000), Influence of foreign ions on the crystal structure of BaTiO3, Journal of the European Ceramic Society, 20 (12), 1997–2007.
• [36] Gao, D., Xiao, D., Bi, J., Yu, P., Yu, G., Zhang, W., Zhu, J., (2003), Hydrothermal syntheses of barium strontium titanate thin films, Materials Transactions, 44 (7), 1320–1323.
• [37] Chornik, B., Fuenzalida, V.A., Grahmann, C.R., Labbé, R., (1997), Water adsorption properties of amorphous BaTiO3 thin films, Vacuum, 48 (2), 161–164.
• [38] Mukhopadhyay, S.M., Chen, T.C.S., (1995), Surface chemical states of barium titanate: Influence of sample processing, Journal of Materials Research, 10 (6), 1502–1507.
• [39] Demri, B., Hage-Ali, M., Moritz, M., Kahn, J.L., Muster, D., (1997), X-ray photoemission study of the calcium/titanium dioxide interface, Applied Surface Science, 108 (2), 245–249.
• [40] Moulder, J.F., Stickle, W.F., Sobol, P.E., Bomben, K.D., (1992), Handbook of x-ray photoelectron spectroscopy, In J. Chastain (Ed.), Perkin-Elmer Corporation, Physical Electronics Division, Eden Prairie Minn, 55344, 82.
• [41] Padalia, B.D., Prabhawalkar, V., Prabhawalkar, P.D., Sampathkumaran, E. V, Gupta, L.C., Vijayaraghavan, R., (1981), ESCA studies of some mixed-valence rare-earth intermetallics, Bulletin of Materials Science, 3 (2), 163–167.
• [42] Cabello, G., Lillo, L., Caro, C., Buono-Core, G.E., Chornik, B., Soto, M.A., (2008), Structure and optical characterization of photochemically prepared ZrO2 thin films doped with erbium and europium, Journal of Non-Crystalline Solids, 354 (33), 3919–3928.
• [43] Qi, J., Matsumoto, T., Tanaka, M., Masumoto, Y., (2000), Europium silicate thin films on Si substrates fabricated by a radio frequency sputtering method, Journal of Physics D: Applied Physics, 33 (16), 2074.
• [44] Kim, J., Kim, D., Kim, J., Kim, Y., Hui, K.N., Lee, H., (2011), Selective substitution and tetragonality by co-doping of dysprosium and thulium on dielectric properties of barium titanate ceramics, Electronic Materials Letters, 7 (2), 155–159.
• [45] Lo, F.-Y., Ting, Y.-C., Chou, K.-C., Hsieh, T.-C., Ye, C.-W., Hsu, Y.-Y., Chern, M.-Y., Liu, H.-L., (2015), Paramagnetic dysprosium-doped zinc oxide thin films grown by pulsed-laser deposition, Journal of Applied Physics, 117 (21), 213911.
• [46] Tshabalala, M.A., Dejene, F.B., Pitale, S.S., Swart, H.C., Ntwaeaborwa, O.M., (2014), Generation of white-light from Dy3+ doped Sr2SiO4 phosphor, Physica B: Condensed Matter, 439, 126–129.
• [47] Szczuko, D., Werner, J., Oswald, S., Behr, G., Wetzig, K., (2001), XPS investigations of surface segregation of doping elements in SnO2, Applied Surface Science, 179 (1–4), 301–306.
• [48] Lu, D.-Y., Peng, Y.-Y., Yu, X.-Y., Sun, X.-Y., (2016), Dielectric properties and defect chemistry of La and Tb co-doped BaTiO3 ceramics, Journal of Alloys and Compounds, 681, 128–138.
• [49] Kinoshita, K., Yamaji, A., (1976), Grain‐size effects on dielectric properties in barium titanate ceramics, Journal of Applied Physics, 47 (1), 371–373.
• [50] Gaytan, S.M., Cadena, M.A., Karim, H., Delfin, D., Lin, Y., Espalin, D., MacDonald, E., Wicker, R.B., (2015), Fabrication of barium titanate by binder jetting additive manufacturing technology, Ceramics International, 41 (5), 6610–6619.
• [51] Ghayour, H., Abdellahi, M., (2016), A brief review of the effect of grain size variation on the electrical properties of BaTiO3-based ceramics, Powder Technology, 292, 84–93.
• [52] Cao, D., Liu, B., Yu, H., Hu, W., Cai, M., (2015), First-principles study of electronic and magnetic properties in Co doped BaTiO3, The European Physical Journal B., 88 (3), 75.