1919

EVALUATION of the TRANSMISSION LINE TOWER EXPOSED to ARTIFICIAL GROUND MOTIONS and WIND LOADS

Electricity transmission towers play an important role in the transmission of electricity. These buildings are very important to meet the many requirements related to electricity during natural disasters such as earthquakes and storms. Within the scope of this study, an electrical transmission line tower was analyzed and different wind velocities and different ground motion records were applied to the structure. In addition to it, the artificial earthquake acceleration records for different earthquake levels and soil classes were obtained for Istanbul by using Turkey Building Earthquake Regulation 2018. During the analysis, three wind speeds and the artificial earthquake acceleration records obtained by taking into account the different earthquake levels and ground classes were used. The wind pressure values acting on the structures are determined according to ASCE 7-10 standard. The ground motion data were carried out time history analysis. As a result of the analysis, displacement, stress and base shear force values were obtained and compared.

Keywords:

Steel towers, Wind analysis Time history analysis,

PDF

___

[1] Tian L, Yu Q, Ma R. and Wang C., (2014), The collapse analysis of a transmission tower under wind excitation. The Open Civil Engineering Journal, 8, 136-142.
[2] Polat Ö.O, (2010), Comparision of wind loading on buildings by using ASCE 7-05, Eurocode 1-4 and TS 498, İstanbul Technical University, Master’s Thesis, İstanbul.
[3] Kamarudin S.A., Usman F. and Baharuddin I.N.Z., (2018), Review on analysis and design of lattice steel structure of overhead transmission tower. International Journal of Advanced and Applied Sciences, 5 (1) , 73-80.
[4] Liang J. Z., Hao H., (2008), Performance of Power Transmission Tower in PMA under Simulated Earthquake Ground Motion. In Proceedings of the 14th World Conference of Earthquake Engineering, October 12-17, Beiging, China.
[5] Bai, F. L., Hao, H. and Li, H. N., (2009), Response analysis of a transmission tower-line system to spatial ground motions. In Australian Earthquake Engineering Society Conference, Newcastle, Australia.
[6] Hadimani P., Kulkarni S.,(2017), Static and Dynamic Analysis of Trasmission Line Tower. International Journal of Emerging Research in Management &Technology, 6 (2), 147-154.
[7] Partal Ş.D., (2012), Structural behaviour of steel lattice telecommunication towers under the seismic action wıth other actions, Gaziantep University, Master’s Thesis, Gaziantep.
[8] Tuncer M., (1993), Dynamic Analysis of tower structures a case study: PTT Kars Television Tower, Master’s Thesis, Middle East Technical University.
[9] Rajasekharan J., Vijaya, S., (2014), Analysis of Telecommunication Tower Subjected to Seismic & Wind Loading, International Journal of Advancement in Engineering Technology, Management and Applied Science, 1(02).
[10] Sharma K.K., Duggal S.K., Singh D.K. and Sachan A.K., (2015), Comparative Analysis Of Steel Telecommunication Tower Subjected To Seismic & Wind Loading, Civil Engineering and Urban Planning: An International Journal (CiVEJ), 2(3).
[11] Long, X., Wang, W. and Fan, J. (2018), Collapse analysis of transmission tower subjected to earthquake ground motion, Modelling and Simulation in Engineering, ID 2687561.
[12] Bhowmik, C., Chakraborti, P. (2020), Analytical and experimental modal analysis of electrical transmission tower to study the dynamic characteristics and behaviors. KSCE Journal of Civil Engineering, 24 (3), 931-942.
[13] Asgarian, B., Eslamlou, S. D., Zaghi, A. E. and Mehr, M., (2016), Progressive collapse analysis of power transmission towers. Journal of Constructional Steel Research, 123, 31-40.
[14] Tas H.H.,(2019), Investigation of structural behavior of tower structures of steel telecommunication tower structures, Suleyman Demirel University, Master’s Thesis, Isparta.
[15] Korkmaz, K. A., Çarhoğlu, A. I. and Kural, M. E., (2008), Sürdürülebilir enerji kaynaklarından rüzgâr türbinlerinin davranışlarının deprem etkisi altında incelenmesi. İstanbul Ticaret Üniversitesi Fen Bilimleri Dergisi, 7(14), 1-13.
[16] Yalciner, H., Sensoy, S., and Eren, O., (2012), Time-dependent seismic performance assessment of a single-degree-of-freedom frame subject to corrosion, Engineering Failure Analysis, 19, 109-122.
[17] Kumbasaroglu, A., (2020), Effect of anchor bars on seismic behavior of infilled walled frames. KSCE Journal of Civil Engineering, 24(10), 2980-2992.
[18] ASCE 7-10, (2010), Minimum design loads for buildings and other structures, American Society of Civil Engineers, Reston, Virginia.
[19] TBDY, Türkiye Bina Deprem Yönetmeliği, Ankara, 2018.
[20] Afet ve Acil Durum Başkanlığı, (AFAD), 2019, https://www.afad.gov.tr
[21] Babur A., (2012), Finite element modeling and similation of tower structures under earthquake loads, Ondokuz Mayıs University, Master’s Thesis, Samsun.
[22] Wilson E., Habibullah A., (1998), SAP 2000 Integrated Finite Element Analysis and Design of Structures Basic Analysis Refence Manual, Berkeley, Computers and Structures.
[23] Pacific Earthquake Engineering Research (PEER) Center, https://ngawest2.berkeley.edu/
[24] Özlek C., (2015), A comparison of wind loads acting on structures by means of using ASCE 7-10, Eurocode 1-4 and TS 498, Istanbul Technical University, Master’s Thesis, Istanbul.

Başlangıç: 2020
Yayıncı: Kütahya Dumlupınar Üniversitesi

Arşiv