190194

Heat Treatment Effect on Thermal, Micro-Crystal Structure and Magnetic Behavior of Ni45Mn40Sn10Cu5 Heusler Shape Memory Alloy

Ni-Mn-Sn-based Heusler alloys are important materials that have potential applications as environmentally friendly smart materials with beneficial properties as well as being magnetic. Both the magnetic field-induced reverse martensitic transformation and the high operating temperature are crucial for the applications of Ni-Mn-Sn-based magnetic shape memory alloys. In this study, martensite transformation temperatures were determined by applying different heat treatments (700 °C, 900 °C, 1100 °C) to Ni45Mn40Sn10Cu5 sample produced by Arc Melter melting method. While reverse conversion was observed in T2 (no heat treatment) and 700°C heat treatment, no reverse conversion was observed at 900°C and 1100°C. When the X-ray diffractogram was examined, martensite phase and γ phase were determined. When the magnetic hysteresis of the samples was examined, it was observed that the magnetic saturation went towards zero with the increase in heat treatment and accordingly, there was a decrease in the magnetization effect.

Keywords:

magnetic materials, shape memory, heusler alloys phase transformation,

PDF

___

Zaki, H.H.M., Solid state synthesis of NiTi. 2011: University of Western Australia.
Nagasawa, A., et al., Reversible shape memory effect. Scripta Metallurgica, 1974. 8(9): p. 1055-1060.
Saburi, T. and S. Nenno, Reversible shape memory in Cu Zn Ga. Scripta Metallurgica, 1974. 8(12): p. 1363-1367.
Ullakko, K., et al., Large magnetic‐field‐induced strains in Ni2MnGa single crystals. Applied Physics Letters, 1996. 69(13): p. 1966-1968.
Ducher, R., R. Kainuma, and K. Ishida, Phase equilibria in the Ni–Fe–Ga alloy system. Journal of Alloys and Compounds, 2008. 463(1-2): p. 213-219.
Planes, A., et al., Magnetostructural tweed in ferromagnetic Heusler shape-memory alloys. Materials Science and Engineering: A, 2006. 438: p. 916-918.
O'handley, R.C., Modern magnetic materials: principles and applications. 2000: Wiley.
Bruno, N., et al., On the microstructural origins of martensitic transformation arrest in a NiCoMnIn magnetic shape memory alloy. Acta Materialia, 2018. 142: p. 95-106.
Chabri, T., et al., Temperature and magnetic field dependent martensite transformation in Al doped Ni-Mn-Sn disorder alloys and its effects on magnetoresistance and magnetocaloric effect near room temperature. Materials Research Express, 2018. 5(8): p. 086511.
AdaptaMat Ltd. 122 6. KAYNAKLAR http://www.adaptamat.com/, Helsinki, Finland (1995).
Kök, M. and G. Ateş, The effect of addition of various elements on properties of NiTi-based shape memory alloys for biomedical application. The European Physical Journal Plus, 2017. 132: p. 1-6.
Lin, Y.-C. and H.-T. Lee, Magnetostriction and magnetic structure in annealed recrystallization of strain-forged ferromagnetic shape memory Fe–Pd–Rh alloys. Journal of Applied Physics, 2010. 107(9).
Liu, Z., et al., Martensitic transformation and shape memory effect in ferromagnetic Heusler alloy Ni 2 FeGa. Applied physics letters, 2003. 82(3): p. 424-426.
Saito, T., Y. Koshimaru, and T. Kuji, Structures and magnetic properties of Co–Ni–Ga melt-spun ribbons. Journal of Applied Physics, 2008. 103(7).
Webster, P., Magnetic and chemical order in Heusler alloys containing cobalt and manganese. Journal of Physics and Chemistry of Solids, 1971. 32(6): p. 1221-1231.
Kainuma, R., et al., Metamagnetic shape memory effect in a Heusler-type Ni43Co7Mn39Sn11 polycrystalline alloy. Applied Physics Letters, 2006. 88(19).
Hassan, N.u., et al., Tunable martensitic transformation and magnetic properties of Sm-doped NiMnSn ferromagnetic shape memory alloys. Crystals, 2021. 11(9): p. 1115.
Cullity, B.D. and C.D. Graham, Introduction to magnetic materials. 2011: John Wiley & Sons.
Jiles, D., Introduction to magnetism and magnetic materials. 2015: CRC press.
Kittel C., Türkçesi: Bekir Karaoğlu, Katıhal Fiziğine Giriş (İngilizce 6. Basımdan Çeviri), Güven Kitap Yayın Dağıtım, İstanbul, (1996)