Determination of the functional properties of some Nigerian and imported rice varieties

Determination of the functional properties of some Nigerian and imported rice varieties

This study determined the comparative study of the functional properties of some Nigerian and imported rice varieties. The result showed a significant difference in functional properties at (p>0.05). Illa (Nigerian) rice had the highest Water Absorption Capacity (WAC) (353.76%) and Oil Absorption Capacity (OAC) (218.32%) than the imported rice variety. The bulk density of both samples had less significantly different values. The percentage values of dispersibility (75.00%) were higher in Ofada (Nigerian) rice. Nigerian rice had a higher swelling index (10.91%). The amylopectin contents of tested rice varieties were 76.26, 76.55, 75.58, 74.37, and 77.55% for Illa, Abakaliki, Jemila, Ofada, and Imported rice, respectively. The result revealed that Imported rice had the highest value (77.55%) of amylopectin, followed by Abakaliki rice which recorded 76.55%, and Illa rice variety from the Southern region had 76.28%. In comparison, the Ofada rice sample had the lowest value (74.37%) of amylopectin content, followed by Jemila rice which recorded 75.58% of amylopectin content. The amylose content for Illa, Abakaliki, Jemila, Ofada, and Imported rice varieties was 23.73, 23.45, 24.42, 25.64, and 22.45%, respectively. Rice flour, with low amylose content, gives moistness, chewiness, and softness to the textures of the product. It showed that Ofada rice had the highest value (25.64%) of amylose content, followed by Jemila rice which recorded 24.42% of amylose content. The lowest value (22.45%) was found in imported rice, followed by Abakaliki rice with 23.45% and Illa rice sample with 23.73% of amylose content. It can be concluded that Nigerian rice is compared handsomely with imported rice in terms of functional properties, which determines the end-use and general acceptability of flour samples.

___

  • H. Twinomuhwezi, C. G. Awuchi, M. Rachael, Comparative study of the proximate composition and functional properties of composite flours of amaranth, rice, millet, and soybean, American Journal of Food Science and Nutrition, 6(1), (2020) 6-19.
  • O. Oluwole, T. Akinwale, T. Adesioye, O. Odediran, J. Anuoluwatelemi, O. Ibidapo, F. Owolabi, S. Owolabi, S. Kosoko, Some of the functional properties of flours from the commonly consumed selected Nigerian food crops, International Research Journal of Agricultural and Food Sciences, 1(5), (2016) 92-98.
  • M. O. Iwe, U. Onyeukwu, A. N. Agiriga, F. Yildiz, Proximate, functional and pasting properties of FARO 44 rice, African yam bean and brown cowpea seeds composite flour, Cogent Food & Agriculture, 2(1), (2016) 1-10.
  • C. G. Awuchi, V. S. Igwe, C. K. Echeta, The functional properties of foods and flours, International Journal of Advanced Academic Research, 5(11), (2019) 139-160.
  • S. Chandra, S. Samsher, Assessment of functional properties of different flours, African Journal of Agricultural Research, 8(38), (2013) 4849-4852.
  • M. Kaur, N. Singh, Relationships between the selected properties of seeds, flours, and starches from different chickpea cultivars, International Journal of Food Properties, 9(4), (2006) 597-608.
  • M. Siddiq, M. Nasir, R. Ravi, K. D. Dolan, S. M. Butt, The effect of defatted maize germ addition on the functional and textural properties of wheat flour, International Journal of Food Properties, 12(4), (2009), 860-870.
  • J. C. Anuonye, C. E. Chinma, J. Olukayode, A. Suleiman, Nutrient composition, amylose content and pasting characteristics of some elite accessions of NERICA rice, Journal of Food Technology Research, 3(1), (2016) 36-47.
  • A. Pokhrel, A. Dhakal, S. Sharma, A. Poudel, Evaluation of physicochemical and cooking characteristics of rice (Oryza sativa L.) landraces of Lamjung and Tanahun districts, Nepal, International Journal of Food Science, 2020, Article ID: 1589150, 1-11.
  • N. Singh, L. Kaur, N. S. Sodhi, K. S. Sekhon, Physicochemical, cooking and textural properties of milled rice from different Indian rice cultivars, Food Chemistry, 89(2), (2005) 253–259.
  • A. O. Oko, B. E. Ubi, N. Dambaba, Rice cooking quality and physic-chemical characteristics: A comparative analysis of selected local and newly introduced rice varieties in Ebonyi state, Nigeria, Food and Public Health, 2(1), (2012) 43–49.
  • R. Thomas, W. N.. Wan Abdullah, R. Bhat, Physiochemical properties, proximate composition, and cooking qualities of locally grown and imported rice varieties marketed in Penang, Malaysia, International Food Research Journal, 20(3), (2013) 1345–1351.
  • F. M. Bhat, C. S. Riar, Physicochemical, cooking, and textural characteristics of grains of different rice (Oryza sativa L.) cultivars of temperate region of India and their interrelationships, Journal of Texture Studies, 48(2), (2017) 160–170.
  • S. Sharma, A. Pokhrel, A. Dhakal, A. Poudel, Agro-morphological characterisation of rice (Oryza Sativa l.) landraces of Lamjung and Tanahun district, Nepal, Annals of Plant Sciences, 9(2), (2020) 3731–3741.
  • O. O. Adekoyeni, S. A. Fagbemi, A. R. Ismaila, Ofada rice identity, physical qualities and processing technology options for upgrading: A review, Annual Research & Review in Biology, 23(2), (2018) 1-9.
  • A. M. Abbas, I. G. Agada, O. Kolade, Impacts of rice importation on Nigeria’s economy, Journal of Scientific Agriculture, 2, (2018) 71-75.
  • FMARD, The Agriculture Promotion Policy (2016-2020), Federal Ministry of Agriculture and Rural Development, Abuja FCT, Nigeria, 2016.
  • C. Diako, E. Sakyi-Dawson, B. Bediako-Amoa, F. K. Saalia, J. T. Manful, Consumer perceptions, knowledge and preferences for aromatic rice types in Ghana, Nature and Science, 8(12), (2010) 12-19.
  • F. Apori-Buabeng, Market organisation and consumers’ perception of locally produced rice in the Ashanti region of Ghana, Master’s Thesis, Kwame Nkrumah University of Science & Technology (2009) Kumasi, Ghana.
  • F. D. Wireko-Manu, C. Amamoo, Comparative studies on proximate and some mineral composition of selected local rice varieties and imported rice brands in Ghana, Agriculture and Food Sciences Research, 4(1), (2017) 1-7.
  • G. I. Onwuka, Food analysis and instrumentation theory and practice, Naphtali Prints, Lagos, 2005.
  • P. E. Ide, P. C. Eze, C. N. Eze, Comparative studies on the proximate composition and functional properties of mucuna Sloane bean flour varieties, Journal of Asian Scientific Research, 9(11), (2019) 185-192.
  • U. J. Ukpabi, C. Ndimele, Evaluation of the quality of gari produced in Imo State, Nigeria, Nigeria Food Journal, 8, (1990) 105 – 110.
  • B. A. Udensi, J. O. Onuora, Chemical and functional properties of soybean flours in the Nigerian market, Book of Abstract, 16th Annual Conf. NIFST, Enugu, (1992) 26 – 30.
  • E. R. Ohizua, A. A. Adeola, M. A. Idowu, O. P. Sobukola, T. A. Afolabi, R. O. Ishola, S. O. Ayansina, T. O. Oyekale, A. Falomo, Nutrient composition, functional and pasting properties of unripe cooking banana, pigeon pea and sweetpotato flour blends, Food Science & Nutrition, 5(3), (2017) 750-762.
  • K. K. Singh, T. K. Goswami, Thermal properties of cumin seeds, Journal of Food Engineering, 45(4) (2000) 181- 187.
  • M. A. Ajatta, S. A. Akinola, O. F. Osundahunsi, Proximate, functional and pasting properties of composite flours made from wheat, breadfruit and cassava starch, Applied Tropical Agriculture, 21(3), (2016) 158-165.
  • A. Mahajan, S. Dua, Salts and pH-induced changes in functional properties of amaranth (Amaranthus tricolor l.) seed meal, Cereal Chemistry, 79(6), (2002) 834–837.
  • R. Thomas, R. Bhat, Y. T. Kuang, W. N. Wan Abdullah, Functional and pasting properties of locally grown and imported exotic rice varieties of Malaysia, Food Science and Technology Research, 20(2), (2014) 469-477.
  • R. Bhat, K. R. Sridhar, C. C. Young, A. A. Bhagwath, S. Ganesh, Composition and functional properties of raw and electron beam irradiated Mucuna pruriens seeds, International Journal of Food Science and Technology, 43, (2008) 1338-1351.
  • M. Kaur, N. Singh, Studies on functional, thermal, and pasting properties of flours from different chickpea (Cicer arietinum L.) cultivars, Food Chemistry, 91(3), (2005) 403-411.
  • P. Williams, Y. Pan, V. Poulson, New Applications for Rice Flour, Rice CRC Final Research Report, 2005.
  • N. E. Ihegwuagu, M. O. Omojola, M. O. Emeje, O. O. Kunle, Isolation and evaluation of some physicochemical properties of Parkia biglobosa starch, Pure and Applied Chemistry, 81(1), (2009) 97-104.
  • S. B. Fasoyiro, S. R. Akande, K. A. Arowora, O. O. Sodeko, P. O. Sulaiman, C. O. Olapade, C. E. Odiri, Physico-chemical and sensory properties of pigeon pea (Cajanus cajan) flours, African Journal of Food Science, 4(3), (2010) 120-126.
  • O. S. Lawal, K. O. Adebowale, B. M. Ogunsanwo, L. L. Barba, N. S. Ilo, Oxidized and acid thinned starch derivatives of hybrid maize: functional characteristics, wide–angle X-ray diffractometry and thermal properties, International Journal of Biological Macromolecules, 35(1-2), (2005) 71-79.
  • O. Malomo, O. A. B. Ogunmoyela, O. O. Adekoyeni, O. Jimoh, S. O. Oluwajoba, M. O. Sobanwa, Rheological and functional properties of soy – poundo yam flour, International Journal of Food Science and Nutrition Engineering, 2(6), (2012) 101-107.
  • O. O. Aluge, S. A. Akinola, O. F. Osundahunsi, Effect of malted sorghum on quality characteristics of wheat-sorghum-soybean flour for potential use in confectionaries, Food and Nutrition Sciences, 7(13), (2016) 1241-1252.
  • J. Eke-Ejiofor, L. Nwiganale, The effect of variety and processing methods on the functional and chemical properties of rice flour, International Journal of Nutrition and Food Sciences, 5(1), (2016) 80-84.
  • A. A. Adebowale, M. T. Adegoke, S. A. Sanni, M. O. Adegunwa, G. O. Fetuga, Functional properties and biscuit making potentials of sorghum – wheat flour composite, American Journal of Food Technology, 7(6), (2012) 372-379.
  • A. A. Adebowale, L. O. Sanni, M. O. Onitilo, Chemical composition and pasting properties of Tapioca grits from different cassava varieties and roasting methods, African Journal of Food Science, 2, (2008) 77-82.
  • J. Eke-Ejiofor, F. Owuno, Functional and pasting properties of wheat/three-leaved yam (Dioscoreadumetorum) composite flour blend, Global Research Journal of Agricultural and Biological Science, 3(4), (2012) 330-335.
  • K. O. Falade, A. S. Christopher, Physical, functional, pasting and thermal properties of flours and starches of six Nigerian rice cultivars, Food Hydrocolloids, 44, (2015) 478–490.
  • S. Susiyanti, R. Rusmana, Y. Maryani, S. Sjaifuddin, N. Krisdianto, M. A. Syabana, The physicochemical properties of several Indonesian rice varieties, Biotropia, 27(1), (2020) 41 – 50.
  • A. Masniawati, N. A. M. Asrul, E. Johannes, M. Asnady, Characterization of rice physicochemical properties local rice germplasm from Tana Toraja regency of South Sulawesi, in: D. Tahir (Eds.), Journal of Physics: Conference Series, The 2nd International Conference on Science (ICOS), Makassar, Indonesia, 2017, Volume 979, Article ID: 12005.
  • I. Buresova, I. Sedlackova, O. Famera, J. Lipavsky, Effect of growing conditions on starch and protein content in triticale grain and amylose content in starch, Plant Soil Environs, 56(3), (2010) 99–104.
  • J. Eke-Ejiofor, D. B. Kiin-Kabari, Chemical, pasting, functional and sensory properties of Sweet and Irish potato chips, Nigerian Food Journal, 28(2), (2010) 47-54.