___

• [1] Doebelin, E.O., “System dynamics: modeling and response”, Merrill (1972).
• [2] Çengel, Y.A., Ghajar, A.J., “Heat and mass transfer : fundamentals & applications”, McGraw-Hill Education, 5 edition (2014).
• [3] Vollmer, M., “Newton’s law of cooling revisited”, Eur. J. Phys. 30 (5) (2009) : 1063-1084.
• [4] Hireholi, S., Shashishekhar, K.S., Milton, G.S., “Experimental and theoretical study of heat transfer by natural convection of a heat sink used for cooling of electronic chip”, (2013).
• [5] Himrane, N., Ameziani, D.E., Bennacer, R., “Effect of the weather conditions on natural convection in storage silo”, in 3rd International Symposium on Environmental Friendly Energies and Applications (EFEA) (2014) : 1-6.
• [6] Bagnall, K.R., Muzychka, Y.S, Wang, E.N., “Application of the kirchhoff transform to thermal spreading problems with convection boundary conditions”, IEEE Trans. Components, Packag. Manuf. Technol. 4 (3) (2014) : 408-420.
• [7] Yu, L., Liu, D., “Study of the thermal effectiveness of laminar forced convection of nanofluids for liquid cooling applications”, IEEE Trans. Components, Packag. Manuf. Technol. 3 (10) (2013) : 1693-1704.
• [8] Farahmand, F., Dawson, F.P., Lavers, J.D., “Temperature rise and free-convection heat-transfer coefficient for two-dimensional pot-core inductors and transformers”, IEEE Trans. Ind. Appl. 45 (6) (2009) : 2080-2089.
• [9] Chang, S.W., “Forced heat convection in a reciprocating duct fitted with 45 degree crossed ribs”, Int. J. Therm. Sci., 41 (3) (2002) : 229-240.
• [10] Moraga, N.O., Marambio, M.A., Cabrales, R.C., “Geometric multigrid technique for solving heat convection-diffusion and phase change problems”, Int. Commun. Heat Mass Transf. 88 (2017) : 108-119.
• [11] Wang, C., Qiu, Z., Yang, Y., “Collocation methods for uncertain heat convection-diffusion problem with interval input parameters”, Int. J. Therm. Sci. 107 (2016) : 230-236.
• [12] Gong, X., Yang, X., Luo, Q., Tang, L., “Effects of convective heat transport in modelling the early evolution of conduits in limestone aquifers”, Geothermics 77 (2019) : 383-394.
• [13] Castanet, G., Frackowiak, B., Tropea, C., Lemoine, F., “Heat convection within evaporating droplets in strong aerodynamic interactions”, Int. J. Heat Mass Transf. 54 (15-16) (2011) : 3267-3276.
• [14] Natale, M.F., Santillan Marcus, E.A., “The effect of heat convection on drying of porous semi-infinite space with a heat flux condition on the fixed face x=0”, Appl. Math. Comput. 137 (1) (2003) : 109-129.
• [15] Belhocine, A., Wan Omar, W.Z., “Numerical study of heat convective mass transfer in a fully developed laminar flow with constant wall temperature” , Case Stud. Therm. Eng. 6 (2015) : 116-127.
• [16] (Tim) Shih, T.-M., Thamire, C., Zhang, Y., “Heat convection length for boundary-layer flows”, Int. Commun. Heat Mass Transf. 38(4) (2011) : 405-409.
• [17] Yener, S. C., Yener, T., Mutlu, R., “A process control method for the electric current-activated/assisted sintering system based on the container-consumed power and temperature estimation”, J. Therm. Anal. Calorim. 134 (2) (2018) : 1243-1252.
• [18] Thellier, F., Monchoux, F., Spagnol, S., Bonnis-Sassi, M., “Measurement of ambient air temperature for evaluation of human heat convective losses”, Measurement 42 (1) (2009) : 62-70.
• [19] Faraji, M., El Qarnia, H., “Numerical study of free convection dominated melting in an isolated cavity heated by three protruding electronic components”, IEEE Trans. Components Packag. Technol. 33 (1) (2010) : 167-177.
• [20] Yaacob, Z., Hasan, M.K., “Nonstandard finite difference schemes for natural convection in an inclined porous rectangular cavity”, International Conference on Electrical Engineering and Informatics (ICEEI) (2015) : 665-669.
• [21] Yang, X., Mao, Z., Wu, Y., Liang, L., Bi, Y., “Numerical simulation on convection heat transfer of pulsating flow in corrugated tube”, International Conference on Materials for Renewable Energy & Environment (2011) : 1882-1884.
• [22] Shafiq, F., Ullah, A., Chughtai, I., Hamid, A., Nadeem, M., “CFD study of natural convection heat transfer from an enclosed assembly of vertical cylinders”, 14th International Bhurban Conference on Applied Sciences and Technology (IBCAST) (2017) : 519-522.
• [23] Cardarelli, F., “Materials handbook : a concise desktop reference”, Springer (2008).
• [24] Wujek, S.S., Staats, W.L., Elbel, S.W., Koplow, J.P., Kariya, H.A., Hrnjak, P.S., “Method for determining air side convective heat transfer coefficient using infrared thermography method for determining air side convective heat transfer coefficient using infrared thermography”, Purdue e-pubs 2587 (2016).
• [25] Conti, R., Gallitto, A.A., Fiordilino, E., “Measurement of the convective heat-transfer coefficient” arXiv:1401.0270v1 (2014).
• [26] Garnier, B., Lanzetta, F., Lemasson, P., Virgone, J., “Lecture 5A: Measurements with contact in heat transfer: Principles, implementation and pitfalls”, Eurotherm Seminar 94 Advanced Spring School: Thermal measurements & inverse techniques 5th edition-Station Biologique de Roscoff (13–18 June, 2011).
• [27] Nakamura, H., “Spatio-temporal measurement of convective heat transfer using infrared thermography”, in Heat Transfer - Theoretical Analysis, Experimental Investigations and Industrial Systems InTech (2011).