Konik yoğunlaştırmalı bir güneş enerjili hava ısıtıcının verimine farklı absorber yüzey kullanımının etkisi
Bu çalışmada, çift geçişli hava akış kanalında dolgu malzemesi bulunan yeni dizayn edilmiş bir konik yoğunlaştırıcılı hava ısıtıcının termal performansına farklı absorber yüzey kullanımının etkisi incelendi. Bu amaçla, standart siyah boyalı bakır boru, seçici yüzey ve yapay olarak pürüzlendirilmiş absorber yüzeyleri ayrı ayrı kullanıldı. En yüksek termal verim seçici yüzey kullanımı ile elde edildi.
Effect of various absorber surfaces on the efficiency of solar air heater with conical concentrator
In this study, the effects of various absorber surfaces on the thermal performance of a newly designed solar air heater with conical concentrator, including packings inside two-pass airflow channel of the absorber were investigated. For this purpose, in addition to standart black-painted copper tube, absorber with selective surface or artificially roughened surface was used separately as absorber surfaces. The highest thermal efficiency was obtained by using the absorber with selective surface.
___
- Al-Nimr, M.A., Transient Behavior of a Matrix Solar Air Heater, Energy Conversion and Management, 34(8), 649-656, 1993.
- Bhargava, A. K., Garg, H. P. and Sharma, V.K., Evaluation of The Performance of Air Heaters of Conventional Designs, Solar Energy, 29, 523,1982.
- Duffie, J.A., and Beckman, W.A., Solar Engineering of Thermal Processes, 2nd edition John Wiley and Sons Inc,, New York, 1991.
- Edwards, E.K., Gier, J.T., Nelson, K.E. and Roddick, R.D., Spectral and Directional Thermal Radiation Characteristics of Selective Surfaces For Solar Collectors, Proc. of the U.N. Conference on New Sources of Energy, Rome, 1961.
- Gupta, S. C., Effectiveness of Packed-Bed Solar Air Heaters, Solar Energy Int. Prog., vol 2.Ed. T.N. Veziroğlu, P.Press, 767, 1978.
- Hottel, H.C. and Unger, T.A., The Properties of a Copper Oxide- Aluminum Selective Black Surface Absorber of Solar Energy, Solar Energy, 3,10,1959.
- Kalogirou S., Lloyd S. and Ward J., Modelling, Optimisation and Performance Evaluation of a Parabolic Trough Solar Collector Steam Generation System, Solar Energy, 60, 49-59, 1997.
- Liu, V.D., Diaz, L.A., and Suryanarayana, N.V., Heat Transfer Enhancement in Air Heating Flat-Plate Solar Collectors, J. Solar Energy Engineering, 106, 358-363,1984.
- Löf, G.O.G., Fester D.A. and Duffie J.A., Energy Balance on a Parabolic Cylinder Solar Reflector, ASME, J. Eng. for Power. 84A, 24, 1962.
- Murphy L.M. and May E.K., Steam Generation in Line-Focus Solar Collectors: a Comparative Assessment of Thermal Performance, Operating Stability, and Cost Issues, SERI/TR-1311, 1982.
- Prasad, B.N., and Saini, J.S., Effect of Artificial Roughness on Heat Transfer and Friction Factor in Solar Air Heater, Solar Energy, 41, 555-560, 1988.
- Smith, P.D., Solar Collector with Conical Element, US Patent, 1977.
- Sharma S.P., Saini, J.S. and Varma, H.K., Thermal Performance of Packed-Bed Solar Air Heaters, Solar Energy, 47(2), 59-67,1991.
- Toğrul I.T., Kurutmada Konik Yoğunlaştırıcılı Bir Güneş Enerjisi Sisteminin Kullanılması, Doktora Tezi, Fen Bilimleri Enstitüsü, Elazığ, 2001.
- Uroshevich M., Solar Collector, US Patent, 1981.
- Verma, R., Chandra, R. and Garg, H.P., Optimization of Solar Air Heaters of Different Designs, Renewable Energy, 2(4-5), 521-531,1992
- ISSN: 1300-3615
- Yayın Aralığı: Yılda 2 Sayı
- Başlangıç: 1977
- Yayıncı: TÜRK ISI BİLİMİ VE TEKNİĞİ DERNEĞİ