Optimal Design Method for Absorption Heat Pump Cycles Based on Energy-Utilization Diagram
Optimization for energy systems is considered at three levels: synthesis (configuration), design (component characteristics), and operation. This paper aims to evaluate the system performance and margins for improvement of two absorption heat pump systems, including an absorber heat exchanger (AHX) and a solution heat exchanger (SHX), and perform their design/operation optimization efficiently based on an energy-utilization diagram (EUD) for performance improvement. Before optimization, exergy efficiency is higher in the SHX cycle, while the margin for improvement is larger in the AHX cycle. The optimization attempts to reduce exergy destruction in the components where dominant exergy destruction caused by heat transfer occurs. In the absorber, the operating points are adjusted to make the temperature slopes at the hot and cold sides coincide. The design parameters in other components are adjusted to improve the heat transfer performances. The distribution of exergy destruction of each component leads to improve exergy efficiency. After these improvements, exergy efficiency is higher in the AHX cycle. It is concluded that we could efficiently realize the design/operation optimization of thermodynamic systems using an EUD, because the diagram presents both exergy destruction and margin for improvement at the components comprehensively, as well as the operating properties of working fluids.
___
- R. K. Swartman, V. Ha, C. Swaminathan, “Comparison of ammonia–water and ammonia–sodium thiocyanate as the refrigerant–absorbent in a solar refrigeration system,” Solar Energy., 17(2), 123-127, 1975.
- R. Best, C. L. Heard, H. Fernandez, J. Siqueiros, “Developments in geothermal energy in Mexico-Part five: the commissioning of an ammonia/water absorption cooler operating on low enthalpy geothermal energy,” Journal of Heat Recovery Systems., 6(3), 209-216, 1986.
- M. A. Siddiqui, “Optimum generator temperatures in four absorption cycles using different sources of energy,” Energy Conversion and Management., 34(4), 251-266, 1993.
- J. F. Seara, A. Vales, M. Vazquez, “Heat recovery system to power an onboard NH3 –H2O absorption refrigeration plant in trawler chiller fishing vessels,” Applied Thermal Engineering., 18(12), 1189-1205, 1998.
- W. Wei, W. Baolong, S. Wenxing, L. Xianting, “An overview of ammonia-based absorption chillers and heat pumps,” Renewable and Sustainable Energy Reviews., 31, 681-707, 2014.
- K. E. Herold, R. Radermacher, S.A. Klein, Absorption chillers and heat pumps, 2nd Ed. Boca Raton: CRC Press, 2016.
- R. Ventas, A. Lecuona, A. Zacarías, M. Venegas, “Ammonia-lithium nitrate absorption chiller with an integrated low-pressure compressor booster cycle for low driving temperatures,” Applied Thermal Engineering., 30, 1351-1359, 2010.
- C. Vereda, R. Ventas, A. Lecuona, M. Venegas, “Study of an ejector-absorption refrigeration cycle with an adaptable ejector nozzle for different working conditions,” Applied Thermal Engineering., 97, 305-312, 2012.
- C. A. Frangopoulos, M. R. von Spakovsky, E. Sciubba, “A brief review of methods for design and synthesis optimization of energy systems,” Applied Thermal Engineering., 5(4), 151-160, 2002.
- A. Toffolo, S. Rech, A. Lazzaretto, “Generation of complex energy systems by combination of elementary processes,” Journal of Energy Resources Technology., 140, 1-11, 2018.
- Inoue, N. (2005). Studies on the Characteristics of Absorption Cycles and their Applications (Doctoral dissertation), University Waseda, Doctor of Engineering, Ph. D.
- Y. T. Kang, W. Chen, R. N. Christensen, “Development of design model for a rectifier in GAX absorption heat pump systems,” ASHRAE Transactions., 102, 963-972, 1996.
- M. Ishida, Creation of energy system, Tokyo: Ohmsha, 2004.
- G. Wall, C. C. Chuang, M. Ishida, “Exergy study of the kalian cycle,” Analysis and Design of Energy Systems: Analysis of Industrial Processes, 10(3), 73-77, 1989.
- T. Srinophakun, S. Laowithayangkul, M. Ishida, “Simulation of power cycle with energy utilization diagram,” Energy Conversion and Management., 42, 1437-1456, 2001.
- H. Hattori, H. Matsumoto, and Y. Amano, “Design of an Ejector-Absorption Heat Pump based on Entropy Generation Minimization,” in ECOS 2017: Proceeding of the 30th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, San Diego, California, USA, 2017.
- H. Obana, Handbook for designing of heat exchanger, 2nd Ed. Tokyo: Engineering book Inc., 2000.
- H. Matsumoto, H. Hattori, and Y. Amano, “Investigation of absorption heat pump cycle driven by low temperature waste heat,” in PRTEC 2016: Proceedings of the First Pacific Rim Thermal Engineering Conference, Hawaii's Big Island, USA, 2016.
- ISSN: 1301-9724
- Yayın Aralığı: Yılda 4 Sayı
- Başlangıç: 1998
- Yayıncı: -