Economical and Enviromental Effects of Thermal Insulation Thicness in Four Different Climatic Regions of Turkey

In the countries which supply big amount of their energy needs by import like Turkey using the energy economically is important. Thermal insulation technologies in buildings are the main method for using energy economically. But choosing the thickness of the insulation material redundant causes high insulation costs. For this reason, an optimum point which provides the highest price in insulation applications is the subject. In this study, for Antalya, Manisa, Ankara and Sivas in the four climate regions in Turkey and optimum insulation thickness, energy saving and payback period in using two different insulation materials (extruded polystrene and rock wool) and five different kinds of fuel (coal, natural gas, fuel-oil, LPG, electricity)is calculated. In addition to this, an analysis of insulation thickness of the harmful emissions of the gas like CO2 and SO2 was made. The results of the study showed that the optimum insulation thickness vary between 0.016 and 0.145 m, energy savings vary between 1.79 $/m² and 103.44 $/m² and the payback period vary between 1.268 years and 6.022 years depending on the city and type of fuel. Environmental impact high used fuels of coal determined during the combustion reveals CO2 and SO2 emissions 67%-75% between decreases.

Keywords:

Optimum insulation thickness, Energy saving Environmental impact, TSE 825,

PDF

___

Dombaycı, Ö.A., Degree-days maps of Turkey for various base temperatures, Energy, 34, 1807-1812, 2009.
Dombaycı, Ö.A., The environmental impact of optimum insulation thickness for external walls of buildings, Building and Environment, 42, 3855-3859, 2007.
Sisman, N., Kahya, E., Aras, N., Aras, H., Determination of optimum insulation thicknesses of the external walls and roof (ceiling) for Turkey’s different degree-day regions. Energy Policy, 35, 5151–1555, 2007.
Buyukalaca, O., Bulut, H., Yılmaz, T., Analysis of variable-base heating and cooling degree-days for Turkey, Applied Energy 69(4), 269–283, 2001.
Hasan, A., Optimizing insulation thickness for buildings using life cycle cost. Applied Energy, 63, 115-124, 1999.
Daouas, N., A study on optimum insulation thickness in walls and energy savings in Tunisian buildings based on analytical calculation of cooling and heating transmission loads, Applied Energy, 88, 156-164, 2011.
Uçar, A., Balo, F., Effect of fuel type on the optimum thickness of selected insulation materials for the four different climatic regions of Turkey, Applied Energy, 86, 730-736, 2009.
Çomaklı, K., Yüksel, B., Environmental impact of thermal insulation thickness in buildings. Applied Thermal Engineering, 24(2), 933–940, 2004.
Dombaycı, Ö,A,. Gölcü M, Pancar Y. Optimization of insulation thickness for external walls using different energy-sources. Applied Energy, 83, 921– 928, 2006.
Yu, J., Yang, C., Tian, L., Liao, D., A study on optimum insulation thicknesses of external walls in hot summer and cold winter zone of China, Applied Energy, 86, 2520-2529, 2009.
Yıldız, A., Gürlek, G., Erkek, M., Özbalta, N., Economical and environmental analyses of thermal 10

International Journal Of Renewable Energy Research-Cover

ISSN: 1309-0127
Başlangıç: 2015
Yayıncı: İlhami ÇOLAK

Arşiv