A Proposal of Implementation of Ducted Wind Turbine Integrated With Solar System for Reliable Power Generation in Bangladesh

A Proposal of Implementation of Ducted Wind Turbine Integrated With Solar System for Reliable Power Generation in Bangladesh

Exploiting the wind energy at low wind velocities is a major predicament in creating a sustainable energy resource for a country with inauspicious forthcoming energy crisis. Thus researching new and innovative systems to improve the efficiency of the wind turbines is an indispensable prerequisite. The scope of this paper concentrates on an approach to harness wind power by installing a conical shaped duct in front of the conventional turbine which is coupled with a generator. A solar panel has also been installed with the purpose of acquiring additional power supply. The reason for which a conical shaped duct is preferred is to get added wind velocity at the turbine inlet. The electrical power, obtained from the generator and solar panel are fed to the national grid. With the integration of solar panel and wind turbine more electrical power could be gained. A CFD simulation, utilizing ANSYS-CFX software, was eventually carried out to investigate the velocity profile at the inlet and outlet of the duct. The results obtained from the simulation could be employed to devise the conical shaped duct at the turbine inlet coupled with generator and solar photovoltaic cells.

___

  • Yuji Ohya, Takashi Karasudani, Akira Sakurai, Ken-ichi Abe, Masahiro Inoue, Development of a shrouded wind turbine with a flanged diffuser, Journal of Wind Engineering and Industrial Aerodynamics, Volume 96, Issue 5, May 2008, Pages 524-539.
  • Andrew Kusiak, HaiyangZheng, Optimization of wind turbine energy and power factor with an evolutionary computation algorithm, Energy, Volume 35, Issue 3, March 2010, Pages 1324-1332.
  • N. B. Urli, M. Kamenski, Hybrid photovoltaic/wind grid- connected power plants in Croatian renewable energy program, Renewable Energy, Volume 15, Issues 1-4, September-December 1998, Pages 594-597.
  • Hongxing Yang, Lin Lu, Wei Zhou, A novel optimization sizing model for hybrid solar-wind power generation system, Solar Energy, Volume 81, Issue 1, January 2007, Pages 76-84.
  • O. A. Jaramillo, M. A. Borja, J. M. Huacuz, Using hydropower to complement wind energy: a hybrid system to provide firm power, Renewable Energy, Volume 29, Issue 11, September 2004, Pages 1887-1909.
  • A. Perez-Navarro, D. Alfonso, C. Álvarez, F. Ibáñez, C. Sanchez, I. Segur, Hybrid biomass-wind power plant for reliable energy generation, Renewable Energy, Volume , Issue 7, July 2010, Pages 1436-1443.
  • Sultan Ahmed and M. Quamrul Islam, Wind Power for Rural Areas of Bangladesh, 3rd International Conference on Electrical & Computer Engineering, ICECE 2004, Pages Bangladesh. , Dhaka, http://www.Wind-Energy in./.Bangladeshhtm.org/wind.htm
  • A. C. Mandal, M. Q. Islam, Aerodynamics and Design of Wind Turbines, ISBN 984-31-0923-0, September 15, , Published by BUET, Dhaka-1000.
  • Kirke, Brian, Developments in Ducted Wind Turbines, published on www.cyberiad.net, University of South Australia, 2005.
  • Andy Grant, Nick Kelly. The development of simulation ducted International Netherlands.page-407-414. model. Eighth Conference. Eindhoven, Webster G W, 1979, Devices for utilising the power of the wind, USA Patent No. 4154556.
  • Grant, A D, Dannecker, R K and Nicolson, C D, , Development of building-integrated wind turbines. Proc. World Wind Energy Conference, Berlin. Sheila Widnall. Potential Flow Calculations of Axisymmetric Ducted Wind Turbines. Massachusetts Institute of Technology. July 2009.
  • Lewis, R.I., Vortex Element Methods for Fluid Dynamic Analysis of Engineering Systems, Cambridge Engine Technology, Cambridge University Press 1991.
  • Werle, M.J. and Presz Jr., W.M., Ducted Wind/Water Turbines and Propellers Revisited, Journal of Propulsion and Power, Vol. 24, No. 5, September- October 2008. http://www.twecs.org/
  • C J Lawn. Optimization of the power output from ducted turbines. Queen Mary, University of London, Mile End Road, London E1 4NS, UK. Frankovic, B. and Vrsalovic, I. New high profitable wind turbines. Renewable Energy, 2004, 24, 491-499.
  • Vortec Energy Ltd. Vortec’s windy solution. Aust. Energy News, June 1999 (12).
  • Kogan, A. and Nissim, E., Shrouded Aerogenerator Design Study, Two-Dimensional Shroud Performance Bulletin of the Research Council of Israel, 11 (1962) 67
  • Kogan, A. and Seginer, A., Shrouded Aerogenerator Design StudyⅡ, Axisymmetircal Shroud Performance Proceedings of the Fifth Israel Annual Conference on Aviation and Astronautics, Israel, (1963).
  • Grassmann, F. and Bet, H., Upgrading Conventional Wind Turbines, Renewable Energy, 28 (2003) 71-78.
  • Frankovic, B. and Vrsalovic, I., New High Profitable Wind Turbines, Renewable Energy, 24 (2001) 499.
  • Andy Grant, Nick Kelly. The development of ducted International IBPSA Conference Eindhoven, Netherlands August 11-14, 2003. simulation model. Eighth
  • Swenson, J. Tidal power project: report on the evaluation of an axial flow, lift type turbine. Centre for Energy research, Northern Territory University, 1999.
  • Ewen Stuart, 1999, Analysis of a vertical axis ducted wind turbine, BEng Thesis, University of Strathclyde Glasgow.
  • Gardner, F., Teamwork Technology, Antwerp, Netherlands, perscomm, 8 Sept 1999.
International Journal Of Renewable Energy Research-Cover
  • ISSN: 1309-0127
  • Başlangıç: 2015
  • Yayıncı: İlhami ÇOLAK
Sayıdaki Diğer Makaleler

Energy Saving Potential From Daylighting Through External Multiple-Slat Shaded Window in the Tropics

Pipat CHAİWİWATWORAKUL, D. MATUAMPUNWONG, S. CHİRARATTANANON

Wind Energy Conversion System Using DFIG Controlled by Backstepping and Sliding Mode Strategies

Adel KHEDHER, Nihel KHEMİRİ, Mohamed Faouzi MİMOUNİ

Effect of Thickness on the Film Properties of Spray Deposited Copper Indium Sulfide Thin Films by Ultrasonic Impact Nozzle

Nurdan Demirci Sankir, Erkan Aydin, Hulya Unver, Ezgi Uluer

Bioethanol Production and Optimization Test From Agricultural Waste: The Case of Wet Coffee Processing Waste (Pulp)

Ayele KEFALE, Mesfin REDİB, Araya ASFAW

Modeling and Control of Wind Power Conversion System With a Flywheel Energy Storage System and Compensation of Reactive Power

Seifeddine Belfedhal, EL-Madjid Berkouk, Y. Meslem, Youcef Soufi

Quantum Generator Synthesis

C. Austin COOPER

Operational Experience of Agro-Residue Briquettes Based Power Generation System of 100 kW Capacity

Devendra PAREEK, Asim JOSHİ, Sunil NARNAWARE, Vikas Kr. Verma

An Analysis of the Potentiality of Tidal Power in Sandwip by Using One Way & Two Way Power Generation Technology: An Ideal Model

Tausif Ali, Sabuj Das Gupta, Iftekhar Zaman Arnab, S.M Ferdous

Etching, Evaporated Contacts and Antireflection Coating on Multicrystalline Silicon Solar Cell

Ali IBRAHİM, A.a. EL-AMİN

Comparison Study Between SVM and PWM Inverter in Sliding Mode Control of Active and Reactive Power Control of a DFIG for Variable Speed Wind Energy

Youcef BEKAKRA, Djilani Ben ATTOUS